Heliport Lighting, Obstruction Lighting,
Airfield Lighting, FAA Windcones!
heliport lighting, obstruction lighting,
airfield lighting, faa windcone, aviation
lights, taxiway lights, perimeter light, wind
cone, HELIPORT LIGHTING, OBSTRUCTION LIGHTING,
AIRFIELD LIGHTING, FAA WINDCONE, AVIATION
LIGHTS, TAXIWAY LIGHTS, PERIMETER LIGHT, WIND
CONE, airport lights, heliport specification
|
Product Profiles
LED L852 A/C LED
---
LED L-861T LED
---
PRO IIITM RCL/TDZ Runway Centerline
Light And Touchdown Zone
Pro Iiitm Rcl/Tdz
Runway Centerline Light And Touchdown
Zone
The PRO IIITM RCL/TDZ is used to
indicate runway centerline and touchdown
areas on a precision instrument runway,
providing the pilots with rollout,
take-off and landing guidance aid during
day or night periods of darkness and
restricted visibility.
---
PRO IIITM TCL Taxiway Centerline Light
Pro Iiitm Tcl
Taxiway Centerline Light
PRO IIITM TCL lights serve primarily as
a ground traffic aid during periods of
low visibility to provide positive
visual guidance as a supplement to
taxiway pavement markings and other
guidance elements. Taxiway centerline
lighting is recommended with runways
having precision approach procedures,
particularly at high-traffic-density
airports.
---
PRO IIITM IRGL Inset Runway Guard Light
Pro Iiitm Irgl
Inset Runway Guard Light
The Inset Runway Guard Light is used for
runway incursion protection and traffic
control on taxiways just before active
runways. The IRGL is a unidirectional
inpavement (FAA Style 3) fixture with a
flashing a yellow lamp.
---
PRO IIITM IREL Inset Runway Edge Light
Pro Iiitm Irel
Inset Runway Edge Light
The PRO IIITM IREL is used on instrument
runways at runway edges where it is
impractical to use an elevated light.
Typically used where taxiways intersect
the runway and any other runway edge
location subject to direct aircraft or
vehicle impact.
----
PRO IIITM IRTEL Inset Runway Threshold
And End Light
PRO IIITM IRTEL
Inset Runway Threshold And End Light
For use on precision or non-precision
instrument runways where the in-pavement
threshold and end lights are co-located.
---
PRO IIITM LHS Land And Hold Short Light
PRO IIITM LHS
Land And Hold Short Light
The LHS is a high intensity
unidirectional light that uses two 48
watt lamps, one lamp as primary and one
as back-up. This fixture is used as part
of the Land and Hold Short system
(LAHSO).
---
HRLQ-5 Elevated High Intensity Runway
Edge Light, Model 5
HRLQ-5
Elevated High Intensity Runway Edge
Light, Model 5
For use on precision or non-precision
instrument runways to outline the
lateral and longitudinal limits of
usable landing or take-off area during
periods of darkness and restricted
visibility conditions (day and night).
---
PRO IIITM IRTL Inset Runway Threshold
Light
PRO IIITM IRTL
Inset Runway Threshold Light
For use on precision or non-precision
instrument runways where the threshold
lighting is co-located and where it is
impractical to use an elevated light.
---
PRO IIITM SBGL Inset Stop Bar/Runway
Guard Light
PRO IIITM SBGL
Inset Stop Bar/Runway Guard Light
The Inset Stop bar/Runway guard lights
are used for runway incursion protection
and traffic control on taxiways just
before active runways. They are required
for SMGCS operations during low
visibility conditions as defined in FAA
AC 150/5340-28 and AC 120-57A. The SBGL
is a unidirectional inpavement fixture
(FAA Style 3).
---
PRO IIITM RCLI/TDZI Runway Centerline
Light Or Touchdown Zone Light ICAO
Pro Iiitm Rcli/Tdzi
Runway Centerline Light Or Touchdown
Zone Light ICAO
The PRO IIITM RCLI/TDZI is used to
indicate runway centerline and touchdown
areas on a precision instrument runway,
providing the pilots with rollout,
take-off and landing guidance aid during
day or night periods of darkness and
restricted visibility.
---
AGSU Airside Guidance Sign - Unlighted
AGSU
Airside Guidance Sign - Unlighted
AGSU Signs are designed for use on
airport runways to mark taxi routes and
taxiways/runways intersections. Colors
may be black on yellow, yellow on black,
or white on red depending on the
application.
|
LED Fixtures
L-852A-D LED In-pavement Taxiway
Centerline Light
L-852T LED In-pavement Taxiway Edge
Light
L-861T LED Elevated Light
L-810 LED Obstruction Light
Control and Monitoring Equipment
Airport Lighting Control and Monitoring
System - ALCMS
Insulation Resistance Monitoring System
- IRMS
Individual Control and Monitoring System
- BRITE
Advanced Control Equipment - ACETM
Airport Control Panels - L-821
Circuit Selector Switch - L-847
Auxiliary Relay Cabinet - L-841
Radio Controller - L-854
Power Equipment
Air-Cooled Regulator - L-828/L-829
Air-Cooled Regulator - L-828/L-829
Stackable Air-Cooled Regulator -
L-828/L-829
SGRS SwitchGear Regulator System
L-828/L-829
PA-2, PA-3 & PA-4 Power Adapters
Land and Hold Short Operations (LAHSO)
Power & Control Unit - L-884
In-pavement Lighting - In-pavement
FixturesBidirectional Centerline -
L-850A Style 3
Unidirectional Touchdown Zone - L-850B
Style 3
Bidirectional Runway Edge - L-850C Style
3
Runway Threshold & Runway End - L-850D
Style 2
Runway Approach Threshhold Light -
L-850E Style 2
Land and Hold Short Operations - L-850F
Style 3
ALSF Runway Approach Light and MALSR
Threshold Light
Signature Series LED Taxiway Centerline
Light - L-852A-D Style 3
Bidirectional Taxiway Centerline -
L-852A-D Style 3
Taxiway Centerline F-Range - L-852A/C
Style 3
Omnidirectional Taxiway
Intersection/Heliport - L-852E/F Style 1
Runway Guard Light - L-852G Style 3
Stop Bar Light - L-852S Style 3
Stop Bar and Runway Guard Light -
L-852G/S Style 3
Signature Series LED In-pavement Taxiway
Edge Light - L-852T Style 3
Taxiway Edge - L-852T Style 2
Elevated Lighting Elevated Fixtures
Elevated Runway Guard Light - L-804
Heliport Perimeter Light - L-860 MIJ
Low Intensity Edge (LIA) - L-860 &
L-860E
Signature Series LED Elevated Taxiway
Edge Light - L-861T
Elevated Runway/Taxiway Edge - L-861,
L-861E & L-861T (pop top)
Elevated Runway/Taxiway Edge - L-861,
L-861E & L-861T (clamp band)
Elevated Runway/Threshold End - L-861SE
Elevated Runway/Taxiway Edge - L-862
Elevated Runway Edge - L-862 & L-862E
Elevated Stop Bar Light - L-862S
Airport Retroreflective Markers - L-853
Guidance Signs Illuminated Guidance
Signs
Runway/Taxiway Signs, Signature Series -
L-858Y, R, L, B
Runway/Taxiway Signs, Unlighted -
L-858Y, R, L, H, C
Approach Lighting
High-Intensity Approach Lighting
System - ALSF
Medium-Intensity Approach Lighting
System - MALSR
PAR-56 Steady Burning Approach Light -
E-982
Runway End Identification Lights - L-849
Precision Approach Path Indicators -
L-880, L-881
Airport Beacons - L-801A
Medium-Intensity Heliport Rotating
Beacon - L-801H, L-802H
High-Intensity Airport Metal Halide
Rotating Beacon - L-802A
High-Intensity Refurbished Beacon, 224
Double Drum
Rotating Beacon - L-802A
High-Intensity 36-Inch Double End
Airport Rotating Beacon - L-802A
Elevated Lights & Bases
FAA L-861 "MIEL" Medium Intensity
Elevated Light
FAA L-861 "PEL" Medium Intensity
Elevated Light
L-861T "MIEL" LED Taxiway Lights
E-982 High Intensity Elevated Approach
Light
FAA L-860 "LIEL" Low Intensity Elevated
Light
FAA L-862, L-862E, and L-861SE "HEIL"
High Intensity Elevated Light
FAA L-867 Light Base, Base Plates, Blank
Covers, Spacers, Extensions and Mounting
Stakes
Inset Lights & Bases
FAA L-850A, B High Intensity Runway
Centerline and TDZ Inset Light (ZA181)
FAA L-850A, B, C, D and E High Intensity
Runway and Threshold/End Inset Light
(ZA480)
FAA L-850C & D High Intensity Runway
Edge, Threshold and End Inset Light
(ZA483-8, ZA487-8)
FAA L852G and L852S Series High
Intensity Inset Lights For Guard Light
and Stop Bar Applications (ZA489)
FAA L-852A, B, C and D Inset High
Intensity Taxiway Centerline Light
(ZA280)
FAA L-852 Inset High Intensity Taxiway
Centerline & Stopbar Light (ZA230)
FAA L-852E, F and T High Intensity
Taxiway Edge and Intersection Light
(ZA292)
Vehicle Undercarriage Security
Inspection Light (TS300)
Omnidirectional Semiflush Taxiway,
Runway & Helipad Inset Edge Light
(ZA-202)
PRL Point Rollover Light
FAA L-868 Light Base, Mud Plates, Flange
Rings, Spacers, Extensions, and Two Part
Base Cans
Regulators
FAA L-828 Constant Current Regulators
FAA L-828 4KW and 7.5KW Constant Current
Dry-Type Regulators Low and Medium
Intensity
FAA L-828 10KW Constant Current Dry-Type
Regulators Low, Medium and High
Intensity
FAA L-828 15KW through 20KW Constant
Current Dry-Type Regulators Low, Medium
and High Intensity
FAA L-828 30KW Constant Current Dry-Type
Regulators Low, Medium and High
Intensity
FAA L-828 10-70KW Constant Current
Oil-Filled Regulators Medium and High
Intensity
FAA L-827 Constant Current Regulator
Status Monitor
Constant Current Regulator
Transformers
FAA L-830 Series Isolation Transformers
Heat Shrink Kits "HSK"
FAA L-823 Primary Connector Kits
FAA L-823 Secondary Connector Kits
FAA L-823 Secondary Cable Leads
FAA L-823 Secondary Extension Cords
Control
PLC Based Airport Lighting Control
System
FAA L-854 Runway Light Receiver
Controller
FAA L-854 Heliport Light Receiver
Controller
FAA L-852G Non-Monitored Guard Light
System
PAPI & Signs
FAA L-880/881 PAPI - Precision
Approach Path Indicator
FAA L-858 Lumacurve Taxiway & Runway
Signs
FAA L-858 AGM Taxiway & Runway Signs
FAA L-853 SAFE-HIT Runway-Taxiway
Retroreflective Markers "TRM"
Beacons
FAA L-849 White Flashing Runway End
Identification Lights: (REILs)
FAA L-859 White Flashing
Omni-Directional Approach Lights:
(ODALs)
FAA L-801A Rotating Airport Beacon
Lights
FAA L-801 HBM 150/2 Airport Rotating
Beacon
FAA L-802A Airport Rotating Beacon
FAA L-802A DCB 224 Airport Rotating
Beacon
Medium Intensity Approach Lighting
System with Runway Alignment Indicator
Lights: (MALSR)
ALSF I, Dual Mode ALSF II/SSALR, SSAL
Approach Lighting Systems
Obstruction Lights
FAA L-810 Obstruction Lights "POL"
FAA L-810 Obstruction Lights
FAA L-864 Flashing Beacon
Solar, Portable & Temporary Lighting
Portable/Temporary Elevated Lights
Solar Charged, Model 501 360 One Mile
Barricade Marking Light
Solar Charged, Model 601 360 Two Mile
Aviation Marking Light
Solar Charged, Model 702 360 Three Mile
Aviation Marking Light
RCM-D Runway Closure Marker
LED Solar Road Stud (SRS)
Wind Cones & Obstruction Lights
FAA L-806/807 Windcones
Wind Cones 8-ft Frangible - L-806
Wind Cone 8-ft & 12-ft - L-807
Signature Series LED Obstruction
Lighting - L-810
Obstruction Lighting - L-810 |
  
Item#
Airfield
|
Heliport Lighting, Obstruction Lighting,
Airfield Lighting, FAA Windcones |
We provide OEM energy solutions for military and government, as well as private sector applications, helping clients achieve 100% up-time for applications ranging from Hospitals, school warning signals to explosion proof street lights.Applications:
Commercial - Industrial - Disaster Relief - Military and Residential
OkSolar.com Affiliate


IP Video Anywhere Solar Powered!
Protecting Critical Government Infrastructure
Military and Homeland Surveillance
IP Video AnyWhere Solar Powered!
IP Video solutions are the next wave in CCTV surveillance. The ability to monitor your systems from anywhere, IP video solution.
Keep an eye on your critical facilities at all times.
With OkSolar’s IP Video Anywhere, you can monitor sites several thousand miles away as if they were across the street. Our system facilitates remote site surveillance through energy-independent operation and allows video to be transmitted over IP without any physical lines being installed. Companies with remote or hard to access assets, such as oil and gas pipelines, bridges or rural properties, have not had an effective, economical solution for protecting those assets. Some of the features like automated archiving allow you not only to track construction progress in real time but also to retrieve past images which can be used to resolve issues quickly.

Traffic Warning Signals
Our 12', 2 Head, Solar powered school warning flasher signal is the cost effective solution to your pedestrian safety problems. More Information > Traffic control lights, LED Traffic signals Manufacturer & Distributor, School Zone LED, School Zone LED flashing beacon, 24 7 hour led flashing beacon traffic, school zone, School warning signals, 24 hours warning Flashers, Road way warning signals, pedestrian crossing, railroad warning, ice on bridge warning, low water crossing, led beacons, speed awareness displays, Solar Powered Pedestrian Beacon, Pedestrian Beacons, 24/7 Flashing Beacon


SolarLighting
Complete turn key Systems Solutions for Solar Lighting
All components needed for installation are included (except for the mounting pole). The systems are designed for installation onto a wood, concrete, or metal mounting pole. You may choose to use your own pole or we can quote the poles separately from the lighting system itself.
These units can be used for: Area lighting, Billboards lighting, Dock lights, Park lighting, Parking lot lighting, Parkway lighting, walkway lighting, Street lighting, Transit Lighting, Outdoor area lighting
Complete turn key Systems Solutions for Solar LED Lighting

Solar Tree
We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications:
-Shading vehicles from the sun and at the same time generate Green energy.
-Facilitate the creation of infrastructure for electric vehicles.
One Solar Tree structure system shades eight standard parking spaces.One Solar Tree structure generates enough energy to fully charge eight electric vehicles each day or power Office Space, Industrial plants or a House. We Ship Worldwide in site technical support available.

Fuel Cell Are you tired of your devices being left in the dark, when your solar energy system stops providing power? Then IQ Fuel Cells are the perfect answer for you. Are now available as an alternative source for renewable energy. Unlike traditional power generators, they don't require gasoline to generate power. They also provide an alternative to solar generators because they do not depend on any external power gathering equipment. These units are compact, durable, and built to power a wide range of applications.
The Best Generator Ever!
Applications: Airports, Computer Rooms, Hospitals, Traffic, UPS
Smart designs with IQ Fuel Cells for smart energy applications Contact us today!

Battery Backup Systems for LED Traffic Signs Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With IQUPS battery backup power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
Important feature is the battery backup system’s ability to maintain the memory of the traffic signal controller. The controller is responsible for sequencing the on and off times of the various signals. With a battery backup system, the controller’s memory can be maintained and return to normal operation once the outage has ended. This feature has eliminated the time spent to reprogram controllers after a power outage
Traffic IQUPS It is designed to provide backup power for critical LED traffic light intersections. With 1,000 watts of true sinewave power available, IQFuel Cell and maintenance free Deep cycle batteries.
Traffic IQUPS will drive most large LED systems. Its pure sinewave output is cleaner than utility power, making it ideal for all loads.
Total distortion is typically less than 1.5%. Manufactured in the USA to the highest standards possible, Traffic IQUPS system is the best choice for critical load protection. power outage knocked out traffic lights, backup generators, emergency generator
Depending on the consumers needs, the IQFuelCell automatically charges the battery with up to 100 Ah per day. As independent power supply or in combination with other systems, the IQFuelCell runs self-sufficiently for months.
The circuit is fully protected via breakers and fuses on the AC input, connection to the batteries, and DC loads. Outdoor, lockable, aluminum enclosure includes tamper-proof hardware suitable for pole or wall mounting. DC.

IQAirport
Airport and Heliport landing back-up Battery Charger:�12Volts, 24 Volts, 36Volts, 48 Volts -120VAC or 230VAC Using state-of-the-art, switch-mode technology, the DLS Power Supply series is engineered with the user and variable environmental conditions in mind. Extra care has been given to insure many years of service-free operation, even when subjected to extremely harsh conditions. Batteries are charged quickly and efficiently without over charging and pumps, motors, and fans operate perfectly for prolonged life.
OkSolar.com has decided to adopt QR-Codes in our manufacturing process to streamline support and maintenance in all of our applications, resulting in savings for Government Agencies.
Projects:
Projects
Battery
Storage for Smart Grid IQUPS.com Renewable Energy - Solar PV Plants -
Electric Car Charging Stations - Smart Grid.
BBS Battery Backup system for Obstruction Lights Obstruction Lighting.
Buoy-Based Security System For Ports - How to Secure Ports - Obstruction
Lighting - Marine Lanterns - Infrared LED Red Beacon.
OkSolar Projects Commercial Industrial
and Military - Hospital Solar Power Solutions.
Electric Vehicle Charging Station Solar Powered - How To Create a System to
Solar Power Electric Cars.
How To Create a System to Solar Power Electric Cars.
How to Install a Obstruction Lighting in a Wind Turbine - Wind Turbine
Lighting.
How to Install a Solar Powered Obstruction Lighting in a Wind Turbine -
Solar Powered Wind turbine Obstruction Lighitng FAA Certified.
How to Secure Ports -
Obstruction Lighting - Marine Lanterns - Infrared LED Red Beacon
How to use a BBS Battery Backup system for Obstruction Lights Obstruction
Lighting.
Modular Energy Storage Solar Powered, Wind and Fuel Cells Assisted
Substantially reduces the requirement for diesel fuel and the associated
costs and logistics and attacks..
Military Modular Energy Storage Solar Powered - Wind - Fuel Cells Assisted
Substantially reduces the requirement for diesel fuel and the associated
costs and logistics and attacks.
IQUPS.com Develops Modular Power Storage for Renewable Energy - Solar PV
Plants - Electric Car Charging Stations - Smart Grid.
Shipping
Containers Solar Powered - Modular Energy Storage Solar Powered Wind
Assisted.
Skystream Hybrid 6 wind-solar system increases energy production of the
solar array by up to 35 percent compared with a fixed mount system.
Solar LED Street Lamp -
Obstruction Lighting - Marine Lanterns - Infrared LED Red Beacon
Solar Powered Obstruction Lighting for Wind Turbines.
Solar Powered Obstruction Lighting for Wind Turbines Generators -
Obstruction Lighting Solar Powered.
Solar Powered Schools
Self Powered by a Shipping container.
Wind Turbine Generator Obstruction Lighting Solar Powered.
Wind Turbine Lighting -
Solar Powered Wind turbine Obstruction Lighitng FAA Certified.
Wind Turbine Obstruction Lighting Solar Powered FAA-Certified L-864.






Other Models Available
Sample Ready to ship unit
|
Adobe
PDF Files Many OkSolar documents & catalog pages
require
the latest version of Adobe Acrobat Reader that may
be downloaded free at: You can get this application
for Free at
https://www.oksolar.com/pdf
|