Morningstar's SunSaver controller
is the most advanced small solar controller available today. There have
been over 150,000 SunSavers installed in 53 countries for both
professional and consumer applications.
SUNSAVER SERIES - CHARGE AND LOAD CONTROLLERS SunGuard SG4 Field
proven reliability! SunSaver controllers are user selectable for sealed or
flooded battery types, includes a charging LED and epoxy encapsulated
circuitry in an anodized aluminum case with nickel plated brass binding
clamp terminal screws. Designed for low noise. Models are either 12V or
24V versions. L models include load management, low voltage disconnect
(LVD) red LED. Self-consumption is 6.2mA. Maximum wire size #10 AWG. CE,
CSA, UL listed 1604 for Class 1 Div. 2 hazardous locations.
The SunSaver is the most advanced
small PV charge controller available today.
Rated for 6.5, 10 and 20 amps (12V
and 24V), the SunSaver is priced lower than competitive PV
regulators. Yet, the SunSaver includes standard features and
capabilities not found in any other small PV controller. These
include:
- Extremely High
Reliability
- Full, continuous current ratings at 60°
ambient temperatures.
- Advanced lightning and transient
overvoltage protection.
- Reverse polarity protection.
- High quality surface-mount components.
- Series switching design for improved
safety and protection.
- Outstanding PWM Battery
Charge Control
- Confirmed increase in battery capacities
and operating life.
- PWM Pulse charging
for highest charge acceptance.
- Standard temperature compensation.
- Standard Sealed / Flooded battery select
at the terminal.
- Accuracy to millivolt levels.
- Highest Levels of
Quality
- Approved for use in Hazardous Locations:
Class 1, Div. 2, Groups A-D.
- Built in a world class ISO 9002 certified
facility.
- Automated production so every unit is
exactly the same.
- Parts soldered to .0006 inch accuracy.
- Anodized case, marine terminals, custom
potting material.
Note: All models are the same size and weight:
6.0 in. x 2.18 in. x 1.32 in. (15.2cm x 5.5cm x 3.4 cm)
0.01 cu.ft./0.5 lbs. (0.001 cu.m./0.23kg)
SS6 12VDC, 6.5A
SS6L 12VDC, 6.5A with LVD
SS 10 12VDC, 1OA
SS1OL 12VDC, 1OA with LVD
SS2OL 12VDC, 20A with LVD
SS1O - 24V 24VDC, 1OA
SS1OL - 24V 24VDC, 1OA with LVD
Ratings
- * 6 amp, 10 amp or
20 amp; 12 or 24 volt
- * May be wired in
parallel for 40 amps or more
- * No need to derate:
use up to full "nameplate" ratings and will handle 25%
- overloads
- Highest Reliability
-
- * Failure rates of
less than 2 per 1,000 units
- * Operating
temperatures from -40*to +85*C
- * Tropicalization:
epoxy encapsulation and marine rated terminals
- * Advanced lightning
protection
- * 100% solid state
- Highest Quality -
- * ISO 9002 quality
programs
- * High volume
automated manufacturing for consistent quality
- * Approved for use
in hazardous locations
- * 5 year warranty;
expected 15 year life
- Increased Battery
Life -
- * True constant
voltage PWM charging
- * Series design (not
shunt)
- * Temperature
compensation
- * Setpoint accuracy
to 35mV
MORNINGSTAR SOLAR CONTROLLERS
All Sun Guard, SunSaver and ProStar advanced controller products
include the following standard features:
100% solid-state circuitry, constant voltage, true PWM
series charging, 0 to 100% duty cycle, internally
temperature compensated, lightning protection, reverse
polarity and reverse current flow protection, and low
self-consumption. Designed for parallel operation, no
need for current de-rating (25% design margin.)
Operating temperature range from —40°C to +85°C.
Manufactured to ISO 9002 quality programs. Five year
limited warranty on all products.
Downloadable Document in PDF Format:
Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader |