A Solar Cells bets buy for Electronics Applications,cells, solar cell, solar cells, Poly Crystalline Solar Cells, Silicon Solar.

Order Online > Solar Energy > Solar Cells

We can design all kinds of the solar products non-standard sizes and shapes of Solar Cells and modules, including bi-facial Solar Cells, non-framed and mini PV Modules, non-square shape Modules. for our clients and OEM orders are welcome Quantities 500

Contact Us whit the following OEM information.

Solar Cell Type: mono crystal/poly crystal
Rated Power (Wp):
Charging Voltage:
Rated Current (Imp):
Rated Voltage (Vmp):
Short Circuit Current (Isc):
Open Circuit Voltage (Voc):
Dimensions (mm):
Dimensions (inch):

Ok007

Ok008

single crystal silicon solar cells, crystal silicon solar cells, silicon solar cells, cells, solar cell, solar cells, poly crystalline solar cells, silicon solar, cells manufactures a full line of high efficiency single crystal silicon solar cells, from 4 inch to 8 inch, to be used in solar modules or a variety of consumer products.

60 MM SQUARE SOLAR CELL
OK-60
Output: approximately 3 Volts @ 40 mA. 2.40" square x 0.13" thick epoxy-encapsulated silicon photovoltaic panel Solid, almost-unbreakable module with easy-to-solder spots on backside. Ideal for solar-powered battery chargers and other projects.

FLEXIBLE SOLAR MODULE, 3V 38MA
OK-328
Very thin, extremely flexible polyester encapsulated photovoltaic modules suitable for indoor or protected outdoor use. Lightweight. Great for mounting on curved surfaces. Ideal for charging nickel cadmium and nickel metal hydride batteries or running low current applications. Can be connected in series or parallel for higher voltage or current. Modules have copper strips at each end to make solder connections. 3 Volts @ 38 mA. 4.5" x 2.88".

FLEXIBLE SOLAR MODULE, 3V 19MA
OK-314
Very thin, extremely flexible polyester encapsulated photovoltaic modules suitable for indoor or protected outdoor use. Lightweight. Great for mounting on curved surfaces. Ideal for charging nickel cadmium and nickel metal hydride batteries or running low current applications. Can be connected in series or parallel for higher voltage or current. Modules have copper strips at each end to make solder connections. 3 Volts @ 19 mA. 4.5" x 1.44".

SOLAR BATTERY CHARGER PANEL, 7.2V @ 100MA
OK-610
Flexible thin film polyester encapsulated solar modules designed to charge 6 and 12 volt nickel cadmium, nickel metal hydride or gel cell packs. Can be mounted on curved surfaces. Designed for limited outdoor use. For full time, all-weather conditions is Tefzel®/EVA encapsulated for added protection. 7.2 Volts @ 100 mA. 9.92" x 2.9".

[WEATHERPROOF SOLAR CHARGER, 7.2V @ 100MA ], single crystal silicon solar cells, crystal silicon solar cells, silicon solar cells, cells, solar cell, solar cells, poly crystalline solar cells, silicon solar, cells manufactures a full line of high efficiency single crystal silicon solar cells, from 4 inch to 8 inch, to be used in solar modules or a variety of consumer products.

WEATHERPROOF SOLAR CHARGER, 7.2V @ 100MA
OK-675
Flexible thin film solar module designed to charge 6 Volt nickel cadmium, nickel metal hydride or gel cell packs. This is our CAT # SPL-610 module encapsulated in Tefzel®/EVA for weatherproofing. Flat copper leads extend outside of encapsulation to facilitate connection. Can be mounted on curved surfaces. 7.2 Volts @ 100 mA . 11.31" x 3.87".

PHOTOVOLTAIC DETECTOR
OK-2
Miniature silicon solar cell converts light impulses directly into electrical charges which can easily be amplified, using a transistor for example, to activate a control mechanism. Unlike a conventional photo diode or transistor, it generates its own power and does not require any external bias. Generates 0.4 vdc in moderate light. Silicon cell is mounted on a 0.31" x 0.23" x 0.07" thick plastic carrier and has pc leads on 0.2" centers.

[PHOTOVOLTAIC CELL, 1CM X 2CM ], single crystal silicon solar cells, crystal silicon solar cells, silicon solar cells, cells, solar cell, solar cells, poly crystalline solar cells, silicon solar, cells manufactures a full line of high efficiency single crystal silicon solar cells, from 4 inch to 8 inch, to be used in solar modules or a variety of consumer products.
PHOTOVOLTAIC CELL, 1CM X 2CM
OK-12
Approximate output: 0.45 Volts @ 50 mA0.79" x 0.4" (20mm x 10mm). 0.01" thick.

Power Film

PowerFilm® RC Aircraft Series
The PowerFilm® RC Aircraft Series modules are designed to be easily integrated within remote controlled aircraft. These PowerFilm modules are very lightweight, can be soldered to the back of the module via the extended copper tape, and have an extra edge seal for weather protection and adhesion. Modules are available with a strong pressure sensitive adhesive for simple bonding. These modules do not have UV-stabilized surface. For connection, just solder or crimp to the copper tape. More Information>
PowerFilm® WeatherPro™ Series
The PowerFilm® WeatherPro™ Series is the right choice for permanent outdoor applications that are directly exposed to the elements. The especially rugged construction of these PowerFilm modules includes a UV-stabilized surface, extra edge seal for weather protection, and tin-coated copper leads that extend from the module. Coating the leads with an RTV silicon compound can provide a tightly sealed package. More Information>
PowerFilm® Wireless Electronic Series
Modules in the PowerFilm® Wireless Electronics Series offer a new opportunity to solve the old problem of limited power for wireless electronics in both portable and remote electronic applications. PowerFilm Wireless Electronics modules are lightweight, paper-thin, and durable. Their thin profile enables them to be easily integrated with devices for solar recharging or direct power. Modules have been specifically developed to recharge AA, AAA, 6-volt and 12-volt batteries. These modules do not have a UV-stabilized surface. For connection, just solder or crimp to the copper tape. More information>
- Crystal Solar Cells

Solar Cells for Electronics Applications