|
WALL/POLE MOUNT Nema Enclosure
WALL/POLE MOUNT Nema Enclosure
18"H X 18"W X 8"D (2 Fans/w Thermostat, 4 Square
Outlet, Removable PLYWOOD Back Plate and
insulation
'

Contact US today!

4000 BTU 220 VOLTS W/ 400 WATTS HEAT
100 AMP Main w/ Electrical w/ Twist Lock
Ext. Generator Plug w/ Manual Transfer Switch
Door Alarm Switch's
Flourescent Light
Spool-Up Side Box
Ground Bar
R3.3 Insulation
 

Outdoor, Pole, Wall, Pad, and Traffic NEMA Enclosures
Racking and Non Racking Metal Cabinet Enclosures
|
|
The enclosures are normally used to house electrical
controls, terminals and instrumentation. Typical industrial
applications include traffic control, electronics and
telecommunication. The cabinets are available in many sizes and
configurations, including double door and four door versions
Pre-Configured Outdoor Cabinet Solutions
Configured Outdoor Cabinet Solutions are designed to
meet the most popular cabinet needs. All cabinets
are made from Alum flex material, a unique material,
designed to give the best durability at the lightest
weight
Outdoor Series Cabinets
The 777 series cabinet is a new design in
communication cabinet enclosures, being as rigid as
steel and yet feather light. This series cabinet
offers all the protection needed for tokay's outdoor
requirements. Features front and rear doors,
adjustable rails and a sunshield that sits 1/2" off
the enclosure. Ultimate security is provided by a
three point locking system. Class 250, NEMA 4 rated.
The OkSolar series cabinets offers a powder baked cream
color option.
Pole or Wall Mounted Cabinets
Used in wall or pole mounted applications, the OKPOk
series is a totally weatherproof Class 250, NEMA 4X
rated enclosure. Each cabinet is a compact design
and features a single door with fixed 19" rails.
Also includes pre-drilled holes for connector and
power cord access. Apron protects rear connections
and fan from rain
Point to Point Multi-Point Radio Cabinet
Aluminum outdoor electronic cabinet with stationary
19" rails, 4 outlet gang box for receptacles, four
.65" holes for N -type RF connectors, four 3/4"
holes for power knockouts on bottom and two-hole tab
electrically bonded to the cabinet chassis. Beige
powder coat finish. Front door only. Fan, filter,
heating and cooling are optional.
Buried Battery Enclosures:
Burial Battery enclosure hot dipped galvanized
chest style enclosure for four Group 8G8Ds and
Polyethylene Enclosures, Legs Removable
Environmentally Controlled enclosures and Cabinet
weatherproof Aluminum Cabinet Enclosures,
Environmentally Controlled Cabinet Outdoor Cabinet
for Communications Microwave Radio Equipment and
Traffic control products Enclosures Quality,
Environmental and Safety Management Manual Thermal
Management. ELECTRONIC ENCLOSURE COOLING SYSTEMS
RANGING FROM 1,000 TO 20,000 BTUH WITH UL TYPE 12,
4, 4X, AND NOW 3R !
We offer a 12VDC-24VDC-36VDC-48Volts IQUPS.com
power system installed into any OK enclosure
optional
 
|
|
Adjustable 19" or 23" Standard EIA
Racking, Front and Rear Doors,
3 Point
Locking System, NEMA 4, 4X

Outside Dimensions
39"H x 26 3/4 "D x 25"W
Inside Dimensions
35"H x 26 1/4"D x 24"W
2 Sets of 19" Racking w/
Removable 19" Rail Cage
WRAP AROUND ALUMASHIELD
(POLE OR PAD MOUNTABLE)
Item# 777007 Outdoor Rack mount
Enclosures |
|
To
Check Prices Click Here >
CHECK PRICES
> Components >
Enclosures
Click on Picture for more information
|
Series Enclosures - Custom Order
4 Sets of Adjustable 19" or 23" Racking, 2 Front and 2 Rear Doors, 3 Point Locking System, NEMA 4, 4X


|
Pole, Wall, or Pad Mount Enclosures


|
|
|
Battery Box Enclosures

|
|
|
Air Conditioners
closed-loop enclosure cooling systems to
compliment today's highly engineered
work stations.
35% more energy efficient
40% more savings in space
45% lighter in weight
AIR CONDITIONERS
Top and Side Mount Enclosure Air
Conditioners. High Ambient, 120V, 230V
and 460V models.

|
|
|
Accessory Options
Racking and Non Racking Cabinet
Enclosures Pole or Wall
Mounting Shelf
 
|
|
Power System
Battery Backup Systems for LED Traffic
Signs Increase the public safety and
reduced traffic congestion by allowing
traffic lights to function even during a
power failure. A typical traffic signal
intersection experiences eight to ten
local power outages annually.
With IQUPS battery backup power,
some or all the traffic control signals
can continue to operate. This seamless
switchover to battery power increases
public safety and eliminates the need to
dispatch police or other service
personnel to direct traffic. If all
traffic signals were converted to LEDs,
the battery backup system would allow
full operation of the traffic signals
during a power outage, thus alleviating
traffic congestion.
Important feature is the battery backup
system’s ability to maintain the memory
of the traffic signal controller. The
controller is responsible for sequencing
the on and off times of the various
signals. With a battery backup system,
the controller’s memory can be
maintained and return to normal
operation once the outage has ended.
This feature has eliminated the time
spent to reprogram controllers after a
power outage
Traffic IQUPS It is designed to provide
backup power for critical LED traffic
light intersections. With 1,000 watts of
true sinewave power available, IQFuel
Cell and maintenance free Deep cycle
batteries.
Traffic IQUPS will drive most large LED
systems. Its pure sinewave output is
cleaner than utility power, making it
ideal for all loads.
Total distortion is typically less than
1.5%. Manufactured in the USA to the
highest standards possible, Traffic
IQUPS system is the best choice for
critical load protection. power outage
knocked out traffic lights, backup
generators, emergency generator
Depending on the consumers needs, the
IQFuelCell automatically charges the
battery with up to 100 Ah per day. As
independent power supply or in
combination with other systems, the
IQFuelCell runs self-sufficiently for
months.
The circuit is fully protected via
breakers and fuses on the AC input,
connection to the batteries, and DC
loads. Outdoor, lockable, aluminum
enclosure includes tamper-proof hardware
suitable for pole or wall mounting. DC
ripple <50mV.

|
|
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mOke technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mOke technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
Inverter/Charger Available in 12 - 24- and 48-volt mOkels, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
|
|
We offer a 12V-48Volts
IQUPS.com power system installed into any OK
enclosure
RECTIFIERS
12V: 40A, 60A
24V: 20A, 40A, 60A
48V: 5A, 10A, 20A, 25A, 30A, 40A, 50A
IQUPs.com Compact DC
Power System is an industry leading DC power system optimized
for the demanding power needs of wireless communications and
broadband access equipment.
Requiring only 2RU (87.6mm) of rack height, the Compact DC
Plant is the mOkular, flexible solution for a wide range of
applications.
Backup Power Systems

Inverters
(XDI) 48V, Scalable from 5 amps to 250 amps
12V and 24V, Scalable from 20 amps to 300 amps
Flexible AC Input, DC Output, and Battery Interfaces
Advanced Digital Control and Communication. |
Solar Battery Chargers

Solar Battery chargers foldable
Solar battery Charger
extremely rugged and
easy to carry and deploy
OkSolar military
power requirements. The overall benefits
of our military solar power products are
to, enable extended missions, improve
logistics by enabling field charging
thereby reducing the number of batteries
in the field and provide a significant
cost reduction when compared to primary
batteries.
|
 |
|