Railroad led Crossing Signal.

LED Railroad Crossing Signal
Backup Power Solutions for the Traffic

Reliable High Flux / High Power LED
Uniform Incandesce Look
UV Stabilized Polycarbonate Lens
MIL-STD-810F Moisture
Complete O-Ring Seal
Quick connect or Spade Connection

8 to 20VDC / 8 to 16VAC (50 to 60 Hz)
40 c to +74 C
Voltage Turn-off / 4V
Power Surge 45 VRMS for 80ms
Electronic Noise / FCC Title 47 Sub. B Sec 15 Class A
Transient Immunity AREMA Part 11.3.3
Photometric Requirement AREMA Part 3.2.35
Environments Limits AREM Part 11.5.1 Class B
Power 9W
Imput Current 750mA

Traffic Battery backup systems solar Powered

TRAFFIC Battery backup systems are ideal for both retrofit and new installations and can be pad mounted or controller cabinet mounted.

Generator Backup Solution Provides Extended Runtimes for Critical Traffic Intersections

IQTraffiControl Full line of integrated uninterruptible power supplies (UPS), backup and remote solutions for traffic applications such as signal controllers, advanced traffic management systems, intelligent transportation systems, LED signal lights, wireless systems, electronic highway signs and video monitoring. Battery Backups at Critical Traffic Signals Prevent Accidents During Power Outages

LED technology for traffic signals, small, compact, cost effective backup power solutions can now be integrated into traffic control systems. IQUPS backup power solutions incorporate uninterruptible power supply (UPS) technology to protect against electrical surges that can damage controllers and cause traffic lights to fail. Power outages or power fluctuations at busy traffic intersections can have far reaching consequences.

When electric power fails and signal lights go out at a busy corner, traffic slows to a crawl, now local governments can protect critical intersections from power interruptions that can threaten motorists and pedestrians alike with IQtraffiControl backaups Battery backup systems are the result of new technology. Newly installed traffic signals utilize more efficient, LED lamps that cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Since the electricity needed to operate LED lights can be 85 percent less than that needed by incandescent lamps, it's now technically possible to provide backup power for critical intersections.

In addition to saving energy, LED traffic signals by themselves are brighter and easier to see in foggy conditionsl. Thanks to their low energy use, we can now protect critical intersections that use LEDs from dangerous power outages that can cause accidents

Battery systems cost variable between, depending on the number of lights at the intersection. Each system provides enough electricity to operate the traffic signals in the normal, fully functioning mode or as red flashing lights for two hours. After that time, the signals will flash red for another two hours, alerting motorists that the intersection is operating as a four-way stop.

Backup Power Solutions for the Traffic Industry LED traffic signal technology makes backup power easy to integrate and cost effective

Rebuild America National Infrastructure GREEN Act requiring that federal infrastructure and buildings meet a rising set of environmental standards that not only address issues like global warming but also establish American leadership in green technologies of the future.

traffic control and access control products. Transportation Green Energy Solutions How To Solar Power Traffic signals Traffic Monitors, Traffic, Transportation, Railroad, and Transit (TTRRT), PEDESTRIAN INDICATIONS,

traffic control and access control products, Programmable Flashing School Zone Beacon, 16 Inch Pedestrian Indications, 24/7 C Flashing Beacons, 24-hour flashing beacon increases visibility of traffic signs, 24/7 Dual Flashing Beacons, Dual 24-hour flashing beacons highlight temporary or permanent warning signs, Pedestrian-Activated Flashing Crosswalk Beacon Helps motorists spot pedestrians at uncontrolled crosswalks, Wireless communications activate beacons on both sides of a crosswalk, Pedestrian-Activated Flashing Crosswalk Beacon Helps motorists spot pedestrians at uncontrolled crosswalks Wireless communications activate beacons on both sides of a crosswalk, conflict monitor, signal monitor, conflict monitors, load switch, flasher, detector, traffic, traffic signal, traffic control, solid state devices, conflict monitor testing, traffic controls, access control, loop detector, inductive loop, nema, biu

traffic control and access professionals with reliable hi-tech component products (signal monitors, vehicle detectors, power supplies, load switches, flashers, bus interface units, and detector harnesses) that offer value added benefits for traffic signal cabinets as well as gate, parking, and/or door operators

Federal Highway Administration Supports Innovative State Transportation Projects TRANSPORTATION INFRASTRUCTURE

Improve and Modernize Air Traffic Control

H.R. 2095 Rail Safety Improvement Act , entitled ‘‘An Act to amend title 49, United States Code, to prevent railroad fatalities, in- juries, and hazardous materials releases, to authorize the Federal Railroad Safety Administration, and for other pur- poses

United States Code, to prevent railroad fatalities, in- juries, and hazardous materials releases, to authorize the Federal Railroad Safety Administration, and for other pur- poses bridges on Federal-aid high- ways that are bridges over waterways, other topo- 14 graphical barriers, other highways, and railroads;15

H.R.3999 Title: To amend title 23, United States Code, to improve the safety of Federal-aid highway bridges, to strengthen bridge inspection standards and processes, to increase investment in the reconstruction of structurally deficient bridges on the National Highway System

Custom Solutions and How To Solar Power Programmable Flashing School Zone Beacon, 16 Inch Pedestrian Indications, 24/7 C Flashing Beacons, 24-hour flashing beacon increases visibility of traffic signs, 24/7 Dual Flashing Beacons, Dual 24-hour flashing beacons highlight temporary or permanent warning signs, Pedestrian-Activated Flashing Crosswalk Beacon Helps motorists spot pedestrians at uncontrolled crosswalks, Wireless communications activate beacons on both sides of a crosswalk, Pedestrian-Activated Flashing Crosswalk Beacon Helps motorists spot pedestrians at uncontrolled crosswalks Wireless communications activate beacons on both sides of a crosswalk

12" RED LED BALL FLANGE MOUNT8" RED LED BALL FLANGE MOUNT
12" RED LED BALL SCREWBASE
8" RED LED BALL SCREWBASE
12" AMBER LED BALL SCREWBASE8" AMBER LED BALL SCREWBASE
12" AMBER LED BALL FLANGE MOUNT
8" AMBER LED BALL FLANGE MOUNT
12" Blue-green LED BALL SCREWBASE8" Blue-green LED BALL SCREWBASE
12" Blue-green LED BALL FLANGE MOUNT
8" Blue-green LED BALL FLANGE MOUNT
12" RED LED ARROW SCREWBASE
12" RED LED ARROW FLANGE MOUNT
12" YELLOW LED ARROW SCREWBASE
12" YELLOW LED ARROW FLANGE MOUNT
12" Blue-green LED ARROW SCREWBASE
12" Blue-green LED ARROW FLANGE MOUNT

Contact US today!

Retrofit Screw-in base.

IQ Traffic Control.com Professional LED Traffic Lights Manufacturer Exporter

Full Ball: More and more municipalities around the world are waving goodbye to incandescent traffic signals in favor of LED signals that deliver up to 90 percent greater energy efficiency and profound savings on maintenance costs. Rugged Illumination LED solutions like the new “Incandescent Look” give traffic management professionals a wide choice of robust, quality signal designs that can meet current ITE, Caltrans or EN 12368 standards. Illumination LED signals are designed and rigorously tested to handle conditions such as sun phantom, light uniformity and color washout, which incandescent signals struggle to perform against. Traffic signals LED signals that deliver up to 90 percent greater energy efficiency and profound savings on maintenance costs. Rugged LED solutions . LED signals are designed and rigorously tested to handle conditions such as sun phantom, light uniformity and color washout, which incandescent signals struggle to perform against.

Features and Specs
Up to 90% energy efficiency over incandescent
Long life of 50,000 hours plus
12-inch (300mm) & 8-inch (200mm) modules
OEM or retrofit installation
Quality/reliability
Colors
Red, Yellow & Green

Applications
Replaces incandescent lamps in full ball traffic signal applications

Arrow: IQ Pointing in the Right Direction. Traffic management professionals around the world are leaving maintenance intensive and energy hungry incandescent lamps by the curb and heading for the robust, high-reliability advantages that IQLED illumination LED arrow signals offer. With up to 90 percent energy savings and a long-rated life.

LED arrow signals outshine incandescent signals and offer significant advantages in dealing with sun phantom, light uniformity and color washout issues. Designed for direct retrofit or OEM applications LED arrow signals offer. With up to 90 percent energy savings and a long-rated life

Pedestrian Control: Walk Don't Walk this way. There’s no room for error when managing pedestrian traffic or synchronizing the movement of people and automobiles. LED Pedestrian Control Signals provide proven reliability and well-established LED-versus-incandescent advantages: up to 90% energy savings, longer life, fewer maintenance hassles and lower maintenance costs. Whether your needs require a standard LED outline, new “Incandescent Look” or a more advanced unit with a digital countdown display, a vast collection of weatherproof LED pedestrian control signals that meet a variety of geographic and governmental specifications.

LED Pedestrian Control Signals provide proven reliability and well-established LED-versus-incandescent advantages: up to 90% energy savings, longer life, fewer maintenance hassles and lower maintenance costs

weatherproof LED pedestrian control signals.

IQ Traffic Control needs around the world can be as diverse as the geography. That’s why we developed the LED signal module for Europe and South America. Designed to operate in 230V applications, this “incandescent look” signal comes standard in 200 mm and 300 mm sizes to deliver up to 90% greater energy efficiency and lower maintenance costs.

Technical Specs

Application:
Enhancing all types of roadway signs (stop, yield, wildlife, dangerous corners, etc.)
Marking temporary and permanent road barricade marking
Flashing flagger
Enhancing safety at construction and detour zones
Indicating bridge and tunnel entrances
Marking hazards and infrastructure at industrial sites

BENEFITS

-Quick installation - no external wiring, cable trenching.
-Flexible design enables any configuration of bi-directional or dual flasher solution.
-Pays for itself within the first year of operation in the form of reduced installation, maintenance and servicing costs
-Self-powering capability means it can be installed anywhere
-Reliable operation 365 days per year at nearly any location on earth
-IQ Engineered for up to five (+) years of maintenance-free operation

Programmable Signals, LED Programmable Signals

LED Arrow Lenses

COUNTDOWN PEDESTRIAN SIGNAL

Available voltages 12VDC, 120VAC, 230VAC

BBS Battery backup system (BBs) that provide battery power to traffic intersections.
LED Streetlight, LED Bulb, LED Traffic Light Manufacturer and Exporter

IQ LED Traffic Signals by IQTraffiControl LED Traffic Signals

	Model	IQTCJD200-3-3 \| 200mm LED Traffic Signal Lights \| 8” LED Traffic Signal Lights
	Power Consumption	Red Ball ≤ 8W, Yellow Ball ≤ 8W, Green Ball ≤ 9W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 90 pcs, Yellow Ball – 90 pcs, Green Ball – 90 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCFX200-3-3 \| 200mm LED Arrow Signal Lights \| 8” LED Arrow Signal Lights
	Power Consumption	Red Arrow ≤ 5W, Yellow Arrow ≤ 5W, Green Arrow ≤ 5W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Arrow - 38 pcs, Yellow Arrow – 38 pcs, Green Arrow – 38 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCJD200-3-2 + IQTCFX200-3-2 \| 200mm LED Traffic Signal Lights + 200mm LED Arrow Signal Lights
	Power Consumption	Red Ball ≤ 8W, Yellow Ball ≤ 8W, Green Arrow ≤ 5W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 90 pcs, Yellow Ball – 90 pcs, Green Arrow – 38 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCJD200-3-2 + FX200-3-3 \| 200mm LED Traffic Signal Lights + 200mm LED Arrow Signal Lights
	Power Consumption	Red Ball ≤ 8W, Yellow Ball ≤ 8W, Green Arrow ≤ 5W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 90 pcs, Yellow Ball – 90 pcs, Green Arrow – 38 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCCD200-3-2 \| 200mm Red Cross + Green Arrow Signal Light \| 8” Red Cross + Green Arrow Signal Light
	Power Consumption	Red Cross ≤ 6W, Green Arrow ≤ 5W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Cross - 36 pcs, Green Arrow – 38 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCJD300-3-3 \| 300mm LED Traffic Signal Lights \| 12” LED Traffic Signal Lights
	Power Consumption	Red Ball ≤ 12W, Yellow Ball ≤ 12W, Green Ball ≤ 13W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 168 pcs, Yellow Ball – 168 pcs, Green Ball – 168 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCFX300-3-3 \| 300mm LED Arrow Signal Lights \| 12” LED Arrow Signal Lights
	Power Consumption	Red Arrow ≤ 7W, Yellow Arrow ≤ 7W, Green Arrow ≤ 7W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Arrow - 65 pcs, Yellow Arrow – 65 pcs, Green Arrow – 65 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCJD300-3-2 + IQTCFX300-3-2 \| 300mm LED Traffic Signal Lights + 300mm LED Arrow Signal Lights
	Power Consumption	Red Ball ≤ 12W, Yellow Ball ≤ 12W, Green Arrow ≤ 7W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 168 pcs, Yellow Ball – 168 pcs, Green Arrow – 65 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCJD300-3-2 + IQTCFX300-3-3 \| 300mm LED Traffic Signal Lights + 300mm LED Arrow Signal Lights
	Power Consumption	Red Ball ≤ 12W, Yellow Ball ≤ 12W, Green Arrow ≤ 7W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 168 pcs, Yellow Ball – 168 pcs, Green Arrow – 65 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCFJ300-3-3 \| 300mm LED Bicycle Signal Lights \| 12” LED Bicycle Signal Lights
	Power Consumption	Red Bicycle ≤ 8W, Yellow Bicycle ≤ 8W, Green Bicycle ≤ 8W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Bicycle - 76 pcs, Yellow Bicycle – 76 pcs, Green Bicycle – 76 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCJD300-3-1 + IQTCJD200-3-2 \| 300mm LED Traffic Red Ball + 200mm LED Traffic Yellow & Green Ball
	Power Consumption	Red Ball ≤ 12W, Yellow Ball ≤ 8W, Green Ball ≤ 9W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 168 pcs, Yellow Ball – 90 pcs, Green Ball – 90 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCJD300-3-3 + IQTCFX300-3-1 \| 300mm LED Traffic Ball + 300mm LED Traffic Arrow Signal Lights
	Power Consumption	Red Ball ≤ 12W, Yellow Ball ≤ 8W, Green Ball ≤ 9W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Ball - 168 pcs, Yellow Ball – 90 pcs, Green Ball – 90 pcs, Green Arrow – 65 pcs
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, ITE, standards, IP65

	Model	IQTCCD300-3-2 \| 300mm Red Cross + Green Arrow Signal Lights \| 12” Red Cross + Green Arrow Signal Lights
	Power Consumption	Red Cross ≤ 8W, Green Arrow ≤ 8W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Cross - 93 pcs, Green Arrow – 75 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCCD300-3-2in1 \| 300mm Red Cross + Green Arrow Signal Lights 2-in-1
	Power Consumption	Red Cross ≤ 8W, Green Arrow ≤ 8W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Cross - 93 pcs, Green Arrow – 75 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

LED Countdown Timers

	Model	IQTCDJS-A-1 \| 2 Digits 1 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-99
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5
	Certification	CE, standards, IP65

	Model	IQTCDJS-A-3 \| 2 Digits 3 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-99
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCDJS-B-1 \| 2.5 Digits 1 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-199
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5
	Certification	CE, standards, IP65

	Model	IQTCDJS-B-3 \| 2.5 Digits 3 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-199
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCDJS-C-1 \| 3 Digits 1 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-999
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5
	Certification	CE, standards, IP65

	Model	IQTCDJS-B-3 \| 3 Digits 3 Color LED Countdown Timer (7 Segments BBE LED Countdown Timer)
	Display Mode	0-999
	Power Consumption	≤ 40W
	Working Voltage	80-280VAC, 50/60Hz
	Wavelength (nm)	Red Color - 625±5, Yellow Color - 590±5, Green Color - 505±2
	Certification	CE, standards, IP65

LED Traffic Modules

	Model	IQTC200mm Trailing LED Traffic Signal Module \| 8” Trailing LED Traffic Signal Module
	Style	Ball, Arrow, Red Man, Green Man, Red Cross, Counter, Bicycle optional
	Lens Color	Transparent or Colored optional
	Working Voltage	80-280VAC, 50/60Hz
	Ambient Temperature	-40℃～+70℃
	Certification	CE, standards

	Model	IQTC200mm E27 LED Traffic Signal Module \| 8” E27 LED Traffic Signal Module
	Style	Red, Yellow and Green Ball only
	Lens Color	Transparent or Colored optional
	Working Voltage	80-280VAC, 50/60Hz
	Ambient Temperature	-40℃～+70℃
	Certification	CE, standards

	Model	IQTC300mm Trailing LED Traffic Signal Module \| 12” Trailing LED Traffic Signal Module
	Style	Ball, Arrow, Red Man, Green Man, Red Cross, Counter, Bicycle optional
	Lens Color	Transparent or Colored optional
	Working Voltage	80-280VAC, 50/60Hz
	Ambient Temperature	-40℃～+70℃
	Certification	CE, standards

	Model	IQTC300mm E27 LED Traffic Signal Module \| 12” E27 LED Traffic Signal Module
	Style	Red, Yellow and Green Ball only
	Lens Color	Transparent or Colored optional
	Working Voltage	80-280VAC, 50/60Hz
	Ambient Temperature	-40℃～+70℃
	Certification	CE, standards

LED Pedestrians

	Model	IQTCRX200-3-2 \| 200mm LED Pedestrian Signal Lights \| 8” LED Pedestrian Signal Lights
	Power Consumption	Red Man ≤ 5W, Green Man ≤ 6W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Man - 68 pcs, Green Man – 62 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCRX200-3-D1A \| 200mm Dynamic LED Pedestrian Signal Lights \| 8” LED Dynamic Pedestrian Signal Lights
	Power Consumption	Red Man ≤ 5W, Green Man ≤ 10W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Man - 68 pcs, Green Man – 314 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCRX300-3-2 \| 300mm LED Pedestrian Signal Lights \| 12” LED Pedestrian Signal Lights
	Power Consumption	Red Man ≤ 7W, Green Man ≤ 8W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Man - 80 pcs, Green Man – 78 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCRX300-3-D1A \| 300mm Dynamic LED Pedestrian Signal Lights \| 12” Dynamic LED Pedestrian Signal Lights
	Power Consumption	Red Man ≤ 6W, Green Man ≤ 10W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Man - 75 pcs, Green Man – 314 pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

	Model	IQTCRX300-3-D2A \| 300mm Dynamic LED Pedestrian Signal Lights \| 12” Dynamic LED Pedestrian Signal Lights
	Power Consumption	Red Man ≤ 6W, Green Man ≤ 10W, Red Counter≤ 1W, Green Counter≤ 2W
	Working Voltage	80-280VAC, 50/60Hz
	LED Q’ty	Red Man - 75 pcs, Green Man – 314 pcs, Red Counter – 84pcs, Green Counter - 84pcs
	Wavelength (nm)	Red Color - 625±5, Green Color - 505±2
	Certification	CE, standards, IP65

School Speed 15 when flashing

Radio-Controlled Solar School Beacons

School Speed 25 when flashing School Speed 30 when flashing School Speed 35 when flashing

Solar Powered Railroad Crossing Warning Systems with Remote Control
Remote Control

Traffic Signal Housing Manufactured from polycarbonate or aluminum, the housings are compliant with multiple agency standards including the Institute of Transportation Engineers (ITE), Caltrans, and most state Departments of Transportation (DOTs)