|
Xantrex Power
Panels SW series
Power Panels are Trace's first
packaged power system. They are less expensive than an on-site component
installation and meet many power application needs. To install a Power
Panel, simply connect them to the battery, PV and or AC loads, Power
Panels include inverters and are assembled by Trace with components
specified by the dealer or customer.

Included in all Power Panel
Systems:
- Powder-coated steel backplate
prewired with all NEC / UL required AC & DC overcurrent protection and
disconnects (only for indoor installation). Simply connect to the
battery and AC loads and your system is operational.
- Can be used with wind, solar,
or hydro DC charging sources Finally a Low Cost Alternative to
Assembling Components in the Field
- 60 amp AC system bypass that
allows inverter servicing while keeping AC loads connected to the grid
or generator
- ETL listed components and
enclosure
- Negative/ground bonding block
Options
- Optional nonmetallic battery
enclosure which doubles as a shipping enclosure
- Single or dual C40 Charge
controllers for solar, wind, hydro DC charging sources
- Flexible conduit for connection
of the system to the battery enclosure
- One or two Trace SW or DR
inverters
SW Series Power Panels
- Sine wave AC power inverter
with high-efficiency, bidirectional operation
- Up to 11 kW of continuous AC
power
- Up to 60 amps of AC input from
a generator or utility grid
- Three-stage,
temperature-compensated battery charging (up to 300A @ 12VDC, 240A @ 24
VDC, and 150A @ 48 VDC)
- Utility-interactive and
generator-support operating modes
- Able to regulate up to 4.8 kW
of power from solar or other DC charging sources
- Available outputs of 105, 120,
230 or 120/240 vac at 50 or 60 Hz.
- Available for a 12, 24 or
48-volt DC system
DR Series Power Panels
- Modified sine wave AC power
inverter with high-efficiency operation and battery charging ability
- Up to 7.2 kW of continuous AC
power (120/240 vac systems)
- 30 amps of AC pass through
power at 120 or 120/240 vac from a generator or utility grid to your
loads, in addition to the charger draw
- Three-stage,
temperature-compensated battery charging - up to 240A @ 12 VDC or 140A @
24 VDC
- Able to regulate up to 2.4 kW
of power from solar or other DC charging sources
- Available outputs of 105, 120,
230 or 120/240 vac at 50 or 60 Hz
- Available for 12 or 24-volt DC
system
Downloadable
Document in PDf Format
Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
1, inverters, xantrex power panels, inverters,
power inverters, inverter, power supplies, UPS, surge
protection, distribution, automotive, industrial,
commercial, military, transformers,
transformerinverters, xantrex power panels, inverters,
power inverters, inverter, power supplies, UPS, surge
protection, distribution, automotive, industrial,
commercial, military, transformers, transformer,8 |