SPDC Enclosures

The SPDC Power Systems outdoor aluminum enclosure includes a fan-cooled interior with 17.5” of adjustable racks for mounting
electrical equipment in 19" or 23” rack spacing. A separate
vented chamber is available for up to two (2) 75Ah batteries.
T1 line and AC surge protection are included, along with alarms
for open door (and rear access panel), high/low temperature,
charger failure, and radio summary. The cabinet is equipped with
dual AC powered air-circulating fans and is pedestal mounted as
standard. Applications include wireless communications, data
communications, microwave, and wireless Ethernet.
Standard Specifications:
• Outdoor, 0.125” 3003-h14 AL Enclosure designed to
UL50/NEMA 3R Standards
• Textured, Baked Powder-Coat Finish
• Dimensions: 44” H (incl. Pedestal) x 23.5” D x 24.25” W
• 17.5” of Adjustable Racking for 19” or 23” Equipment
• Pad-lockable Front Door
• Rear Access Panel
• Independent Door and Panel Open Alarms
• Pad Mountable on 8” High Pre-Drilled Pedestal Base;
Multiple-Size Knock-outs on Sides and Bottom for Wire and
Cable Access
• Plugable and Hardwired T1 Connection with 15 Joules of
Surge Protection
• One GFCI Outlet Box with Two 15A Receptacles
• AC Line Surge Protection Rated to 6,500 Amps
• High and Low Temperature Snap Action Thermocouple Alarms
• Drilled/Tapped 10-32 CU Ground Bar with Ground Lug for
End User’s Ground Connection
• DIN Rail Interface for AC, DC Connections and End User Alarms
• Dual AC Air-Circulating Fans with Three (3) Level Thermostat
Control on AL Mount to DIN Rail
• One(1) RF Bulkhead Connector; Additional Knock-out Available
• Removable Lifting Lugs
Options:
• Microwave Transceivers, Other Data or Ethernet Equipment as
Specified by End User
• AC to DC Power Options Rectifier/Battery Charger
— ICT 12-24-5ARM Power Supply
— SENS CM24-8-24AOA
— Other, as Specified by End User
• Batteries – VRLA either Gel or AGM up to (2) 75Ah, 12V
• Optional T1 Connection
• Cable, Connectors, Grounding Kits, Jumpers, Antennas,
Lightning Arrestors, Etc.
• System Integration Engineering and Equipment Installation