Wind Tower Kit, 45' Guyed Tower Kit , Technical Information
A Revolution in Tower Design
 |
Kits include:
Base Connector
Upper Wire Set (280 ft.
pre-cut)
Lower Wire Set (160 ft.
pre-cut)
Base Staples
3/8" x 1 ½" Bolt
3/8" Locknut
Cable Thimbles
Cable Clamps
Set Up
Kit |
45 ft (14
m)
1
1
1
2
3
3
8
16
1* |
* Note: This 45 foot Tower Kit includes a setup kit to
raise the tower.
If more than one tower is to be erected, a single setup up kit
can be used for any towers to be installed. See below for kit details.
Setup Kit
| Kits include:
Gin Pole Cap
100 Foot Rope
Snap Links
8 Foot Cable
3/8" x 1-1/2" Bolt
3/8" Locknut |
Quantity)
1
1
3
1
1
1 |
|
Pipe Pieces Needed:
(available at fence suppliers)
-
24 foot (7.2 meter) length for tower
-
21 foot (6.3 meter) length for tower
-
6 foot (1.8 meter) length for tower base
-
21 foot (6.3 meter) length for gin pole
|
|
Pipe Requirements
|
|
Tower Kits use 1-7/8 inch
(47.5 mm) Steel Tubing
|
|
Maximum Wind Speed
|
Maximum
Wind Speed
70 mph
80 mph
90 mph |
Recommended
Wall Thickness
.065 inch (1.65 mm)
.090 inch (2.3 mm)
.140 inch (3.6 mm) |
Pipe
Schedule
n/a
Schedule 20
Schedule 40 |
 You
may need Adobe Acrobat Reader to open some files. You can get this application
for free at
|
