Marine and RV 12 volt DC fluorescent lights. Save 50-75% on energy usage and increase your battery life by replacing those obsolete incandescent, 12 volts dc Marine and RV 12 volt DC fluorescent lights
 

Thin-Lite uses quality brand name bulbs and parts. Most Thin-Lite light fixtures are patented. Specifications subject to change without notice.

Electronic Inverter Ballast

If you need a 12VDC lighting ballast, Thin-Lite has the solution. Fluorescent, compact fluorescent, low pressure sodium, germicidal, and sign, all benefit from the superior quality that goes into Thin-Lite’s highly efficient ballasts. You’ll appreciate the wide range selection offered for lamps ranging from 6w to 40 watts. You can select open or enclosed. For different voltages, different wattages and connector requirements, consult factory.

 

	MODEL 612 Watts: 16 Lamp: Two F8T5/CW Voltage: 12 VDC Amps: 1.4 Lumens: 800 Dimensions: 14.937" x 5.53" x 1.57" Dimensions (mm): 379.4 x 140.5 x 39.9 Weight (kg): 1.54 lb (0.699 kg)
	MODEL 616 Watts: 30 Lamp: Two F15T8/CW Voltage: 12 VDC Amps: 2.2 Lumens: 1650 Dimensions: 20.625" x 5.53" x 1.57" Dimensions (mm): 523.9 x 140.5 x 39.9 Weight (kg): 2.26 lb (1.025 kg)
	MODEL 690 Watts: 15/30 Lamp: Two F15T8/CW (One with red sleeve) Voltage: 12 VDC Amps: 1.3/2.2 Lumens: 825/1650 Dimensions: 20.625" x 5.53" x 1.57" Dimensions (mm): 523.9 x 140.5 x 39.9 Weight (kg): 2.26 lb (1.025 kg)
	MODEL 622 Watts: 16 Lamp: Two F8T5/CW Voltage: 12 VDC Amps: 1.4 Lumens: 800 Dimensions: 13.95" x 5.56" x 1.51" Dimensions (mm): 354.3 x 141.2 x 38.4 Weight (kg): 1.10 lb (0.499 kg)
	MODEL 626 Watts: 30 Lamp: Two F15T8/CW Voltage: 12 VDC Amps: 2.2 Lumens: 1650 Dimensions: 19.67" x 5.56" x 1.51" Dimensions (mm): 499.6 x 141.2 x 38.4 Weight (kg): 1.68 lb (0.762 kg)
	MODEL 652 Watts: 16 Lamp: Two F8T5/CW Voltage: 12 VDC Amps: 1.4 Lumens: 800 Dimensions: 16.843" x 7.3" x 1.56" Dimensions (mm): 427.8 x 185.4 x 39.6 Weight (kg): 1.22 lb (0.554 kg)
	MODEL 656 Watts: 30 Lamp: Two F15T8/CW Voltage: 12 VDC Amps: 2.2 Lumens: 1650 Dimensions: 22.652" x 7.30" x 1.56" Dimensions (mm): 575.4 x 185.4 x 39.6 Weight (kg): 1.84 lb (0.835 kg)

700 Series Recessed Fluorescent Light Fixtures

Recessed light fixtures provide efficient lighting for elegant interiors. Designed specially for O.E.Ms, they are easy to install in ceilings and under cabinets. They provide the “custom made” look in either the anodized aluminum housing or molded frame. Injection molded or extruded acrylic diffuser lenses add the finishing touch. Model 736XL is available. Consult factory. Model 746 & 742 are extremely light weight.

170 Series Low Profile Fluorescent Light Fixtures

Low profile Thin-Lites are designed for use in areas that require light but have limited mounting space. Only 2.25” wide and 1.25” deep, they provide low profile area and aisle lighting, and fit nicely under cabinets and around mirrors. They feature anodized aluminum housings and clear acrylic diffuser lenses.

190 Series Hi-Tech Fluorescent Light Fixtures

Hi-Tech light fixtures were developed for both efficient and attractive lighting where maximum light is required. Anodized aluminum housings and clear acrylic diffuser lenses provide high light output on three sides. They are designed for commercial and industrial vehicles, and for use in remote area housing, schools and medical facilities in conjunction with alternative sources of energy. Almond end caps are standard. Black end caps optional at no additional charge.

Industrial & Commercial Fluorescent Light Fixtures

Thin-Lite commercial, industrial and residential surface mount fluorescents are designed for practical applications where decorative styling is desirable. They feature anodized aluminum housings and clear diffuser lenses for maximum light output. They are designed for remote switching, and are also available without a diffuser lens for Model 151 and Model 153 with low profile end caps. They are shipped without the fluorescent tube except Model 181. These fixtures utilize standard 20 and 32 watt fluorescent tubes readily available world-wide.

Weatherproof Outdoor Area Fluorescent Light Fixtures

Thin-Lite weatherproof outdoor area lights feature anodized aluminum housings. They provide superior nighttime security and area lighting. When attached to the rear of a vehicle, they provide clear visibility for parking, hitching and backing up. They offer the option of energy efficient outdoor area and security lighting for remote sites where standard grid power is unavailable. Standard amber diffuser lens will not attract insects. Clear lens optional, no charge.

140 Series Indirect Strip Fluorescent Light Fixtures

Strip lights for indirect lighting are designed for use in headliners and behind valances. Only 2.15” wide, they are available in four different lengths to accommodate all standard applications. Easy to install, they feature steel housings with a baked white enamel finish. They are shipped complete with the fluorescent tubes, less diffuser lens and switch.

900 Series Compact Fluorescent Light Fixtures With RFI

Hi-Tech light fixtures were developed for both efficient, attractive and noise free lighting where maximum light is required. Anodized aluminum housings and clear acrylic diffuser lenses provide high light output on dual sides. They are designed for commercial and industrial vehicles, and for use in remote area housing, schools, medical facilities and computer libraries in conjunction with alternative sources of energy. Available with rocker switch optional. Compact fluorescent DULUX S/E, L series or High Lumen BIAX lamp included.

Specialty Fluorescent Light Fixtures

Listed below are standard production models which are used in specialized areas. Thin-Lite Corporation has the capability of designing to customer requirements. Should you have an application not featured in this catalogue, consult factory.

ST 100 Series Indirect Strip Fluorescent Light Fixtures

The ST 100 series strip lights are practical and economically priced. They are designed for indirect lighting, mounted in headliners and behind valances. They feature basic aluminum housings and are shipped complete with fluorescent tubes, less switch and diffuser lens.

ST 130 Series Fluorescent Light Fixtures

The ST 130 series are economically priced, practical lights that feature prepainted aluminum housings and acrylic diffuser lenses. They are available as long as four feet with two standard 32 watt fluorescent tubes to meet maximum lighting requirements. Where practicality is the principal consideration, the ST 130 series suit the requirement perfectly. Cracked ice diffuser lenses and gold color housings are available on Model 130 and Model 134. Gold housing is available on Model 138.

The Original Fluorescent Circline Light Fixtures

They are designed for high light output at low amp draw. They offer years of reliable, virtually maintenance free service. Energy efficient, they are complemented by diffuser lenses, white prepainted finish, and attractive woodgrain trim. Standard fixtures have aluminum housings. They include standard fluorescent tubes powered by Thin-Lites’s highly efficient DC electronic ballasts. Model 109C, Model 109CXL and Model 110 have round housing and Model 109S has a square housing. Model 109CXL has an injection molded acrylic diffuser lens and Model 109CAXL has amber color, that will not attract insects. Model 110 less woodgrain trim.

The Original Fluorescent Single Tube Light Fixtures

They are designed for high light output at low amp draw. They offer years of reliable, virtually maintenance free service. Energy efficient, they are complemented by non-yellowing diffuser lenses, white prepainted finish, and attractive woodgrain trim. Standard fixtures have aluminum housings. They include standard fluorescent tubes powered by Thin-Lites’s highly efficient DC electronic ballasts.

The Original Fluorescent Dual Tube Light Fixtures

They are designed for high light output at low amp draw. They offer years of reliable, virtually maintenance free service. Energy efficient, they are complemented by non-yellowing diffuser lenses, white prepainted finish, and attractive woodgrain trim. Standard fixtures have aluminum housings. They include standard fluorescent tubes powered by Thin-Lites’s highly efficient DC electronic ballasts. Model 180 has a three way rocker switch for choice of red light or white light. Model 190 has two rocker switches and two DC ballasts for choice of red light or white light or both.

Incandescent & Halogen Light Fixtures

Our 10-watt universal mount halogen fixtures have a detachable mounting base, which allows for the fixture to be installed recessed or surface mount. The fixtures are available in a white or brass finish. We offer incandescent fixtures for both indoor and outdoor use. The indoor fixtures are available with a clear or white lens. For the outdoor fixtures a clear or amber lens is optional. The amber lens will not attract night flying insects. Model 160I18 is made of heavy duty construction.