Batteries, Electric/Diesel for General Motors Locomotive and Railroad Applications
we provide Batteries, for Electric/Diesel for General Motors Locomotive, OkSolar leads the industry in providing solar electric power systems
for railroad applications. We are supplier to the railroad industry
concentrating the the best of our time to solar electric applications and
products. We provides fully engineered, highly reliable, low-cost power systems
for a wide variety of applications -- from wayside signaling to hybrid power
systems for railcars.
|
Transportation
Ever-demanding traffic and rail signal applications require a constant
reliability 24 hours a day, 365 days a year. By applying IQtraffiControl
Illumination LED signals in place of older fluorescent or incandescent
technologies, municipalities, rail yards and transit operators can
benefit from recurring energy savings, lower maintenance costs and
reduced safety concerns. We are manufactures OEM/ODM a complete line of
high-flux LED products for the transportation market. We offer a
complete line of LED products used in lighting for airports, bus stops,
rail ways, traffic signals, outdoor lighting and other related
applications.
Our transportation products are more efficient, last longer and
typically consume 90% less energy than incandescent lights, yielding
substantial operational cost savings. Because their service life span is
typically 10 times (approximately eleven years) that of incandescent,
these products offer even greater maintenance savings due to longer
replacement intervals. In addition, they are environmentally friendly.
Solar powered warning signals Using a combination of solar power and
energy-efficient LED lights we allow the transportation engineer the
flexibility to deliver critical warnings in virtually any location,
regardless of power availability.
We offer a full array of red, yellow, green and white LED products
for use in traffic signal balls, arrows and pedestrian signals, as well
as a complete range of signaling products. Installation of LED Signals
can offer significant savings in operating and maintenance costs
resulting in a quick return on initial investment.
Your next
scheduled maintenance will be in 5 to 7 years!
|
|
|
|
    |
|
Solar powered
school warning flasher signal
Solar powered
school warning flasher signal is the cost effective solution to your
pedestrian safety problems.
OkSolar.com traffic Group's solar powered Speed Awareness
displays have been designed to assist transportation departments in
promoting speed limit compliance and traffic safety regardless of
power availability powered.
|
|
         |
|
      |
|
Applications
|
|
Benefits:
-
Your next
scheduled maintenance will be in 5 to 7 years!
-
Promotes speed compliance.
-
Proven technology.
-
Vandal and theft-resistant components and
hardware.
-
Low installation cost.
-
Easily and quickly deployed in
almost any location.
-
NO run Wiring from grid!
-
NO cuts through existing roads,
sidewalks or landscaping.
-
NO Maintenance
-
NO Utility bill
-
Maintenance Free Batteries!
-
Big Credits and Savings form
State and Federal Taxes.
Features:
-
High Intensity.
-
The Flexible design enables any configuration of bi-directional or dual flasher
system solution.-
Low-Cost Installation -- Easily and Quickly Deployed in Any
Location.
-
LED Beacons - Long-Life with Extremely Low Power Consumption.
-
Virtually Maintenance-Free Design.
-
Complete System Packages with Poles.
-
Vandal and Theft Resistant Components and Hardware.
-
1 Year Warranty system .-
20-Year Warranty on Solar Modules.
-
(Optional) Unbreakable Solar Modules.
-
Long-Life, Deep-Cycle, Maintenance-Free Batteries.
-
(Optional) Remote Control Activation.
-
Pays for itself in the form of reduced installation,
maintenance and servicing costs.
-
Reliable operation 365 days per year at nearly any location.
Self Powering Solar System:
-
Self-powering capability means it can be installed anywhere.
-
Unbreakable solar module
technology
-
Utilizes power-saving LEDs
-
Fully self-contained systems
-
Virtually maintenance-free
-
Modular electronic component
Required an optimally
oriented solar panel at the installation site.
Test Conditions:
of 1.5 air mass spectrum; 20 degrees C ambient air temp; 1 sun (1000
watts per square meter at POA irradiance); 1 meter per second wind
speed at 10 meters above grade)
Beginning with a fully charged battery.
Battery discharge limited
to 70% of capacity.
Temperatures above +25°C (+77°F) may affect overall battery life.
Temperatures above +60°C
(+140°F) may affect output.
Operational times are
also reduced below -20 C due to the effects of low temperature on
battery performance.
|
|
Oksolar Solar’s LED Changeable Message Signs and Displays
are available in a variety of formats and sizes to meet your every need! These
cost effective, energy efficient “solar powered” LED variable Message Displays
are a viable alternative to the larger more expensive fixed Intelligent Traffic
System CMS NMS systems. Traffic Calming, Traffic Management, and Traffic Control
applications can easily be addressed with these smaller, more affordable
offerings. Full Central Command, Control and Network communications options are
available to provide optimum automated system flexibility.
POLE-MOUNTED IQ SPEED Checker AWARENESS DISPLAY
This solar powered, pole-mounted speed director provides a
quick and clear signal to the driver of his/her current speed. Use in school
zones, neighborhoods, and anywhere where speed limit compliance is vital. Many
configurations are available to fit your needs. Activate through a pager system
(PAS) or manually operate. Extreme speed setting allows the unit to grab the
attention of the driver by use of other visual displays when not showing their
actual speed. This solar powered unit can be moved easily to different
locations.
A IQ speed display board allows everyone to see the radar speeds. Display boards
generate excitement and additional interest for any event or game. The display
boards with seven inch characters are visible about 350 feet away. The boards
with ten inch characters can be viewed more than 600 feet away. That's as long
as two football fields!
OkSolar Quality
The exceptional high quality OkSolar display boards use state-of-the-art,
electromagnetic digits, and all aluminum construction. These digits are much
easier to read than high intensity LEDs, and they are far more rugged than
conventional mechanical digits.
More information
|
IQ
UPS Traffic Back-up Standby Power
Generation.
-
Battery backup systems for LED
traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals
Increase the public safety and reduced traffic
congestion by allowing traffic lights to
function even during a power failure. A typical
traffic signal intersection experiences eight to
ten local power outages annually. With battery
backup 3 power, some or all the traffic control
signals can continue to operate. This seamless
switchover to battery power increases public
safety and eliminates the need to dispatch
police or other service personnel to direct
traffic. If all traffic signals were converted
to LEDs, the battery backup system would allow
full operation of the traffic signals during a
power outage, thus alleviating traffic
congestion.
Application:
Enhancing all types of roadway signs
(stop, yield, wildlife, dangerous
corners, etc.)
Marking temporary and permanent road
barricade marking
Flashing flagger
Enhancing safety at construction and
detour zones
Indicating bridge and tunnel entrances
Marking hazards and infrastructure at
industrial sites
BENEFITS
-Quick installation - no external
wiring, cable trenching.
-Flexible design enables any
configuration of bi-directional or dual
flasher solution.
-Pays for itself within the first year
of operation in the form of reduced
installation, maintenance and servicing
costs
-Self-powering capability means it can
be installed anywhere
-Reliable operation 365 days per year at
nearly any location on earth
-IQ Engineered for up to five (+)
years of maintenance-free operation
|
|
Optional
|
Wireless
Communications
Oksolar.com also provides remote-control and paging
equipment to control flashing systems from a central office or
computer network, with custom design and field engineering
services available to support our nationwide dealer network.
A complete family of wireless RF sensors, transmitters, loggers,
repeaters, receivers and servers spanning the 418MHz. to 2.4GHz
frequency range. With an emphasis on modularity and Selection.
Remote Control:
Wireless 300 to 20Miles control
OkSolar
also provides remote control and paging equipment to control
flashing systems from a central office or computer network. We
offer custom design and field engineering services available to
support our nationwide dealer network.
Paging System
Two-way paging available for programming and troubleshooting
school zone time clocks (AC or Solar Powered). A two-way paging
system will allow you to program times for the new school year,
special events, and even turn flashers in the system on during
emergencies - all from your office. Two-way paging provides
acknowledgement that the flasher received the message and
provides diagnostic messages to let you know if the flasher is
functional.
IP Video
OK-IP Video Anywhere! Solar Powered, wireless Got
facilities you need to keep an eye on? Oftentimes
they're several miles from your headquarters and, worse,
you can't get any electricity (let alone Ethernet) to an
exterior location where you'd like to mount a camera.
Companies with remote or hard to access assets, such as
oil and gas pipelines, bridges or rural properties, have
not had an effective, economical solution for protecting
those assets.
Wireless Crosswalk
Systems
OKWC - Advance Crosswalk Flasher
This system has a transmitter station located at both ends of
the crosswalk. The transmitter can be configured with a
pedestrian push button or configured to use different types of
sensors such as a OkSmart Walk Microwave Detector. When a
pedestrian is detected at the crosswalk or he presses the
pedestrian push button, a signal is transmitted down the street
to the flasher system. This flasher is often located
approximately 297 feet in advance of the crosswalk.
Advance Crosswalk
Flasher—the OKWC flasher system—contains a radio receiver
and timing logic within its control panel. The radio receives a
signal from the crosswalk and in turn, begins its internal
timer. Each flasher will flash for the predetermined time
programmed into the logic. Typically, a system contains two
transmitter stations, one located on each side of the street and
two flashers upstream from the crosswalk on either side.
OKSP - Solar Pedestrian System
Solar Traffic Controls are installed right at the crosswalk.
This system uses a frequency hopping, spread spectrum radio (FHSS)
to link the units. There are microprocessors in each unit: one
is the master and the other a slave. The pedestrian push button
is on the same pole with the flasher and the solar-power system.
The user approaches and presses the button; the system detects
the contact closure from the button and starts flashing. The
units are constantly "talking" to each other. They have fault
modes so when they stop "talking" to each other, the system goes
into a known-fault condition so the user knows the system needs
service.
The Solar Pedestrian system offers greater flexibility. You can
have up to four flashers in a network. Two can be placed in
advance of the crosswalk and two at the crosswalk.
|
|
 Wireless
Sensors
Adott offers an
expanded line of wireless sensors to measure temperature, relative humidity,
pressure, vibration, analog voltage and current, and discrete digital inputs.
Each sensor is battery operated and fitted with a microprocessor controlled 418
MHz radio transmitter.
The
Adott View is a 418 MHz radio receiver designed to receive and
decode packet data from all Point Six Transmitters. |
 Gate barriers:
Road
Closures. Extreme weather may result in the closing of roads.
Traffic Ice on bridge warning systems,
Manufacturers of Traffic and School warning systems, Roadway signals
Government/Education Team is dedicated to helping your agency implement the best
possible solution to fit your needs. Call us for expert advice and top-quality
solutions for ensuring your operations are highly available. We have a Solution
for every application. Contact Us Today!
Applications: ice on bridge, ice on bridge,
road way signals, roadway 24 flashers, school zone speed limit, approaching
dangerous intersection, stop ahead/signal ahead, pedestrian crossing, railroad
warning, ice on bridge warning, low water crossing, ICE ON BRIDGE, ICE ON
BRIDGE, ROAD WAY SIGNALS, ROADWAY 24 FLASHERS, SCHOOL ZONE SPEED LIMIT,
APPROACHING DANGEROUS INTERSECTION, STOP AHEAD/SIGNAL AHEAD, PEDESTRIAN
CROSSING, RAILROAD WARNING, ICE ON BRIDGE WARNING, LOW WATER CROSSING.
High water level detection on roads
|
|
Road weather
systems: Integrated road weather information systems give road
authorities the weather information they need to make the right decisions on how to deal with winter conditions.
|
|
Stop Button Rugged,
Whether your application requires,
Stop Button and secure wireless stop buttons,
products for material handling applications like
Underground Mining, Processing & Airport
Transportation industries. Whether your application
requires SPEED MONITORING,
REMOTE CONTROLS,
industrial wireless controls,
industrial radio control, industrial controls
wireless, industrial radio control, industrial radio
remote control, industrial wireless control, remote
controls, belly box transmitter, wireless remote
control, wireless controls, radio controls, radio
remote controls, crane control, remote crane
control, crane remote control, monorail remote
control, overhead crane control, concrete pump
control, conveyor remote control, conveyor control,
remote winch control, wireless winch control, remote
boom control, remote relay control, relay remote
control |
|
|
LED Lighting sources are ideally suited
for applications where lighting requirements are principally dictated
by the need to be seen. (Traffic signals, navigational beacons,
obstruction lighting, signage, runway
lighting, brake lights...)
More info on Heavy traffic signs
Innovative traffic design and signaling, designed as per your
Specs. for their lighting needs. Amber alert, Futuristic i intersection control,
"Emergency Vehicle Approaching", signs have been designed and
delivered.
The sign you are reading is a 5 foot by 11 foot.
More information on Visual signals
|
|
Railroad
Applications:
OkSolar.com leads the industry in providing solar electric power
systems for railroad applications. We are the only supplier to
the railroad industry concentrating 100% of our time to  solar
electric applications and products. Kyocera provides fully
engineered, highly reliable, low-cost power systems for a wide
variety of applications -- from wayside signaling to hybrid
power systems for railcars.
The OkSolar Team is dedicated to providing the very best
solution to your railroad installation. OK provides fully
engineered, highly reliable, low cost power systems for a wide
variety of applications.
We specializes in pre-installation design assistance to ensure
years of top-level performance and low-maintenance service.
From 2-Volt track circuit systems to fully integrated equipment
shelters with generator backup, a OkSolar power system is
the solution to your remote power needs.
Applications:
-
Wayside Signaling
-
Intermediate / Approach Signals
-
Repeater Locations
-
Hot Box Detectors
-
Grade Crossing Hybrid Power Systems
-
Telecommunication Power Supplies
-
Control Points
-
Electric Switch Locks
-
AEI Equipment
-
Dragging Equipment Detectors
-
Railcar Solar Power Supplies
-
Switch Machines
-
Lighting Installations
-
2-Volt Track Circuit Systems and
Controllers
-
Primary Battery Replacement
-
Trailer/Skid-Mounted Portable Designs
Features:
Engineering Design Assistance
Site Survey Analysis (before & after installation)
Vandal-Resistant Designs
CAD Sizing Analysis (standalone and hybrid)
Ground and Pole Mount
Wood/Telephone Pole Mounted Systems
Hot Dipped Galvanized Steel Poles & Mounts
Anodized Aluminum Poles & Mounts
Complete System Installation Kits/Packages
Thorough Documentation and Manuals
Onsite Training and Installation Services
Custom Solar Module and System Design
System Performance Warranty
Turnkey Installation Services
Long-term Maintenance Services
Lead-Acid or Ni-Cad Charge Regulation
Fully Integrated Equipment Shelters Available
|
|
Accessories
|
Bullet Proof Panel
(This option adds 3 layer bullet proofing protection to the unit
window. It is the non-shatter configuration and includes
mounting brackets for field replacement.)
|
|
Poles and Aluminum Bases:
We offer several styles of pedestal bases to choose
from, all which fit with our pedestal poles. The square base is available
in aluminum or iron. It can be threaded or used as a slip fit.
Options include steel or plastic door, both which can have your custom
logo cast into it. This base can also be heat treated.
 |
|
ADoAT4
Annual Event Timer
Overview
Model
ADoAT4
is an extremely versatile 24 Hour 365 Day Event Timer designed to support
a wide range of applications. Such applications include: Home and Building
Automation, Security, Access Control, Lighting Control, Etc.
ADoAT4 is equipped with four independently controlled form “C” relay c ontacts
that provide many latching and/or momentary operations during a program
schedule of your choice. The EE prom memory allows for programming of unit
prior to/or during field installation. Events may be set for single or
multiple operations on a daily and/or weekly schedule. The block
programming feature enables repeating an event on any combination of
consecutive days. ADoAT4 will compensate
for daylight savings time if desired. It automatically adjusts for leap
year and is Y2K compatible. Individually selected holiday exceptions can
be programmed to over-ride regularly scheduled events.
Specifications:
-
12 to 24
volts AC or DC operation
-
Standby current: 20mA with relays off combined with 40mA for each relay
on.
-
Four (4) Form “C” relay contacts are rated 10amp @120VAC/28VDC.
-
EE Prom memory protects against loss of programming due to power
failure.
-
Clock synchronization 60Hz (AC operation).
-
Accurate crystal controlled clock (DC operation).
-
Momentary and/or Latching Events.
-
254 individually programmed daily/weekly events.
-
Block programming capacity can accommodate a total of 1778 events per
week.
-
254 programmable Holiday events.
-
“First man in” option.
-
Alphanumeric LCD display simplifies programming.
-
Standard or Daylight Savings Time settings.
-
Automatic compensation for leap year.
-
Each relay operates independently.
-
Built-in charger for 12VDC sealed lead acid or gel type batteries
(Max charge current 300mA).
-
Lithium battery backup maintains clock.
-
User friendly keyboard programming.
-
Unit is Y2K compatible.
|
|
SIGNAL MOUNTING SYSTEMS
Side of Pole Bracket POLYCARBONATE
Ever wonder, when looking at Signal Framework, how do I put
this together? Polycarbonate Mounting System can help you
eliminate these concerns.
PRODUCT FEATURES
-
Side of Pole Mounting One
piece design, fits all signal heads, hollow construction to allow
wire routing
-
Post Top Mounting One
piece design, eliminates drilling holes in poles, safety in
knockdown, ease of mounting, allows
 offset
on signals
-
Mast Arm Pole Mounting
One piece design, fits all signal heads, hollow construction to
allow wire routing
Specifications: 30% Glass
Impregnated Polycarbonate on Brackets 40% Glass Impregnated
Polycarbonate on Post Top Mount Colors: Black, Yellow, Bronze or Green
Item# 170872: The Side of Pole Bracket (SOPB) is a
one-piece, molded polycarbonate bracket that is designed for
side-of-pole mounting. |
|
PEDESTRIAN PUSH BUTTONS & SIGNS
Rectangular, Round, ADA, Led Push Buttons, Stations, Isolator/Led Latch
Assy's, Switches, Pedestrian Signs
|
|
Cabinets and Locks
Our flasher cabinets have weather resistant door seals and are
available for top and bottom or rear mounting.
Cabinets can be fully wired with time clock, NEMA or 5-pin strip, circuit
breaker and on-off toggle switch. They are supplied with either standard
Type II or Police style locks and keys. |
|
Post Tops
Post top mountings are available in aluminum, iron and bronze. Standard
assemblies come with 1 ½” NPS fittings. Optional fittings are tri-stud,
tri-bolt and NPT.
Also available are horizontal and vertical post top terminal compartments.
Specifications
Material: Aluminum Ingot Alloy 319
Opening: 4 ¾” and minimum 3 ¾” depth
1 ½” - 11 ½” NPS threaded boss extending ½” above center top
|
|
Camera Mounting
Our brackets rise to the occasion to fill the mounting needs for
cameras, sensors and antennas. These camera mount brackets are adjustable
and will fit any size, shape or surface.
Special features allow for concealed wiring, optimal 360 degree
positioning and 6’ elevated mounting height above mast arms or poles. |
|
Back Plates
Our vacuum formed back plates are designed to fit all popular
manufacturer’s signal heads. They are formed with a 90 degree, 5/8” flange
on all sides for rigidity and structural integrity.
They come complete with stainless steel mounting hardware. Most styles are
in stock for immediate shipment. Also available are louvered vacuum formed
and flat back style.
Specifications
Material: ABS plastic meeting the
UL 94 Test H.B.
Contain ultra violet inhibitors
and stabilizers
Compounded for cold
weather application
Hair cell finish on front side
Tensile stress at yield of
5300 PSI at 73 degree F
Types: Vacuum Standard, Vacuum
Louvered and Flat back |
|
Confirmation Light
When you need a sure way to confirm a traffic signal is red when a car
enters the intersection then the confirmation light is the way to go.
Connect it to the signal indication and you have the perfect system for
law enforcement to confirm red signal violations. It can also be used as
an on-ramp meter confirmation light or as a scale positioning system.
Specifications
Material: lense - UV stabilized impact resistant polycarbonate
Lense Colors: clear or blue
Watts: 67 or 69 watt 8000 hour
traffic signal lamp (not
to exceed 75 watts) |
|
GPL:
The GPL (Geometrically Programmed Louver) is a precisely aimed traffic
signal louvering system. It can easily predetermine a field of vision with
pinpoint accuracy.
It is designed for fast, easy installation and economic durability. It can
retrofit into existing signals or be installed as a compete visor
assembly. Fits any standard 12” signal head.
Specifications
Material: Housing - Black UV inhibited
ABS plastic
Baffles - Flat Back 0% glass
filled UV inhibited
polycarbonate
View Angles: 7 degrees to 42 degrees
Options: Installation kit |
|
|
Retrofit existing 120VAC fixtures with LED's Luminaries
-
Models also available in greater-than 50 Watt configurations
-
Replaces 50-100 Watt HSP & 175 Watt M. Vapor Fixtures
-
Up to 3 times Life vs. Conventional Luminaries
-
Better Color Rendition & Nighttime Visibility
-
Optional On-board Photocell Prevents False Activation
-
No Warm-Up or Cold Start Problems
-
Std. 120, 240, 277 VAC Input. Other Options Available
-
Significant Operational Savings - Energy & Maintenance
-
Environmental Impact - Eliminate Hazardous Disposal
-
Retrofit Existing Fixtures
Easy to retrofit LED streetlights can easily
retrofit existing metal halide, high pressure sodium
and mercury vapor luminaries.
Your next schedule IQLED maintenance will be in 5 to
8
years!
with our IQ Retrofit Lamps
IQLED Unlike bulb streetlights,
IQLED lighting
modules produce very intense light in tightly
control IQLED directions. There is no longer a need for
reflectors or cut-off shields to minimize light
pollution and trespass. With IQLED energy usage less
than 20% and lifespan more than seven times that of
conventional streetlights, payback occurs very early
in a long life cycle.
|
 |
 |
 |
 |
 |
 |
 |
|
01681000 |
01540 |
488300 |
01420 |
01503 |
01434 |
488500 |
|
Ok-No Bulbs!
Ok-No Ballasts! Ok-No
Starters!
Its
Ok NO
Problems
Weatherproof for coastal climates
Vibration resistant for tunnels and bridges
Withstand 160 MPH winds
|
|
Locomotive Batteries
 |
-
Visual Signals
-
Visual
signals Airport
-
Visual
Signals Transportation
-
Visual
Signals Solar Powered
|
|
|
Traffic and Transportation
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
|
Traffic Enclosures and Cabinets |
|
|
|
The OkSolar Team is dedicated to providing the very best solution to your
railroad installation. We provides fully engineered, highly reliable, low cost
power systems for a wide variety of applications.
OkSolar SPDC specializes in pre-installation design assistance to ensure years
of top-level performance and low-maintenance service.
From 2-Volt track circuit systems to fully integrated equipment shelters with
generator backup, a Kyocera solar power system is the solution to your remote
power needs.
Applications:
- Wayside Signaling
Intermediate / Approach Signals
Repeater Locations
Hot Box Detectors
Grade Crossing Hybrid Power Systems
Telecommunication Power Supplies
Control Points
Electric Switch Locks
AEI Equipment
Dragging Equipment Detectors
Railcar Solar Power Supplies
Switch Machines
Lighting Installations
2-Volt Track Circuit Systems and Controllers
Primary Battery Replacement
Trailer, Skid-Mounted Portable Designs
Features:
Engineering Design Assistance
Site Survey Analysis (before & after installation)
Vandal-Resistant Designs
CAD Sizing Analysis (standalone and hybrid)
Ground and Pole Mount
Wood/Telephone Pole Mounted Systems
Hot Dipped Galvanized Steel Poles & Mounts
Anodized Aluminum Poles & Mounts
Complete System Installation Kits/Packages
Thorough Documentation and Manuals
Onsite Training and Installation Services
Custom Solar Module and System Design
System Performance Warranty
Turnkey Installation Services
Long-term Maintenance Services
Lead-Acid or Ni-Cad Charge Regulation
Fully Integrated Equipment Shelters Available
1, Approach Signals, Wayside Signaling, Intermediate,
Repeater Locations, Hot Box Detectors, Grade Crossing Hybrid Power Systems,
Telecommunication Power Supplies, Control Points, Electric Switch Locks, AEI
Equipment, Dragging Equipment Detectors, Railcar Solar Power Supplies, Switch
Machines, Lighting Installations, 2-Volt Track Circuit Systems and Controllers,
Primary Battery Replacement, Trailer/Skid-Mounted Portable Designs,8
 Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
|
