|
|
OkSolar powered LED Beacons lights
Solar powered LED lights
|
Ok502
Ok502 is the world's most advanced solar-powered LED one nautical mile
(1.8km) marine hazard light. Unique in the world of navigation and
hazard markers, it is completely integrated, self-contained and
virtually indestructible...
|
Specification |
Value |
| |
Flashing* |
Steady |
Light Output |
Effective
Intensity
Green
Red,White,Amber,Blue |
|
~3.1 Candela
~1.3 Candela |
~0.5 Candela
~0.2 Candela |
Nominal Night
Range
Green
Red,White,Amber,Blue |
|
~1.6 NM
~1.1 NM |
~0.8 NM
~0.5 NM |
| Vertical
Divergence |
±3.5° at 50% intensity |
| Horizontal
Output |
360° |
Operation |
| Minimum
Autonomy |
300 Hours |
| Minimum
Equivalent Peak Sun Hours to Maintain Minimum Autonomy |
1.5 Hours |
| Latitude Range |
55° S to 55° N |
| On/Off Level |
350/250 lux |
| Illumination
Technology |
4 LEDs |
| Lifespan of
LEDs |
Up to 100,000 hours |
| Chromacity of
Color Output |
Meets IALA specifications |
| Available
Standard Flash Patterns |
7 including steady-on |
Solar Panels |
| Type |
Mono-Crystalline
Potted with UV-protected polyurethane and domed for higher
efficiency |
| Maximum Power |
0.3 Watts |
| Efficiency |
14% |
Battery |
| Type |
Pure-lead thin plate with starved-electrolyte |
| Nominal
Voltage |
2 Volts |
| Capacity |
2.5 Amp-hr at 10-hr discharge rate |
Construction |
| Lens Material |
Polycarbonate |
| Battery
Venting |
Vent at the bottom of the lantern |
| Sealing |
Self-contained unit, potted with polyurethane |
| Weight |
1.1 kg (2.45 lbs) |
Environmental and Electrical |
| Temperature
Range** |
-40° to +80° C
(-40° to 176° F) |
| Waterproof |
As per IP67 (NEMA 6) |
| Explosion
Resistance |
As per MIL-STD-810E
Method 511.3 |
| CE Approval |
As per EN 60945:1997 |
Quality Control and Patents |
| Quality
Assurance |
ISO 9001 |
| Trademarks and
Patents |
US Patents: 5,782,552 & 6,013,985
European Patent Application:96925627.0
Other patents pending |
Accessories |
| Mounting
Brackets |
For threaded version only:
|
|
* All Flashing Light specifications are based on a 12.5% duty cycle
(code 064 - 15 flashes per minute).
** Consistent ambient temperatures above +25°C (+77°F) may affect
overall battery life. Temperatures above +60°C (+140°F) may affect
output. |
|
|
|
Ok601
is a true commercial navigation light designed for use where a range of
1-2 nautical miles is required*. The Ok601 installs in minutes using three
screws or bolts, is completely integrated and self-contained. Its unique
encapsulated polycarbonate/polymer design ensures the unit is completely
waterproof, rugged and requires no maintenance or servicing for its full
lifespan of up to 5 years...
|
Specification |
Value |
| |
Flashing* |
Steady |
Light Output |
Effective
Intensity
Green
Red,White,Amber,Blue |
|
~11 Candela
~6 Candela |
~4 Candela
~2 Candela |
Nominal Night
Range
Green
Red,White,Amber,Blue |
|
~2.9 NM
~2.3 NM |
~2.0 NM
~1.5 NM |
| Vertical
Divergence |
±3.5° at 50% intensity |
| Horizontal
Output |
360° |
Operation |
| Minimum
Autonomy** |
300 Hours |
150 Hours |
| Minimum
Equivalent Peak Sun Hours to Maintain Minimum Autonomy |
1.5 Hours |
3 Hours |
| Latitude
Range*** |
55° S to 55° N |
| On/Off Level |
70/100 lux |
| Illumination
Technology |
8 or 16 LEDs, depending on color |
| Lifespan of
LEDs |
Up to 100,000 hours |
| Chromacity of
Color Output |
Meets IALA specifications |
| Available
Standard Flash Patterns(custom patterns
available) |
208 including steady-on |
Solar Panels |
| Type |
Mono-Crystalline
Potted with UV-protected polyurethane and domed for higher
efficiency |
| Maximum Power |
1.4 Watts |
| Efficiency |
14% |
Battery |
| Type |
Pure-lead thin plate with starved-electrolyte |
| Nominal
Voltage |
4 Volts |
| Capacity |
5 Amp-hr at 10-hr discharge rate |
Construction |
| Lens Material |
Polycarbonate |
| Battery
Venting |
Vent at the bottom of the lantern |
| Sealing |
Self-contained unit, potted with polyurethane |
| Weight |
2.2 kg (4.85 lbs) |
Environmental and Electrical |
| Temperature
Range**** |
-40° to +80° C
(-40° to 176° F) |
| Waterproof |
As per IP67 (NEMA 6) |
| Salt Fog
Corrosion, Vibration |
As per TP1861E |
| Explosion
Resistance |
As per MIL-STD-810E
Method 511.3 |
| CE Approval |
As per EN 60945:1997 |
Quality Control and Patents |
| Quality
Assurance |
ISO 9001 |
| Trademarks and
Patents |
US Patents: 5,782,552 & 6,013,985
European Patent Application:96925627.0
Other patents pending |
|
|
|
|
|
Ok701
Ok701 is the world's
most advanced, solar-powered LED navigation light for up to three nautical
miles of visibility. It installs in minutes, is completely self-contained
and requires no maintenance or servicing for the life of its power storage
pack (up to 5 years).
The Ok701 is the smaller and lighter version of the two models available in
the Ok700 Series; it is intended for use in regions where solar illumination
is greater than 1.5 hours of winter sunlight...
|
Specification |
Value |
| |
Flashing* |
Steady |
Light Output |
Effective
Intensity
Green
Red,White,Amber,Blue |
|
~29 Candela
~18 Candela |
~10 Candela
~6 Candela |
Nominal Night
Range
Green
Red,White,Amber,Blue |
|
~3.7 NM
~3.2 NM |
~2.6 NM
~2.2 NM |
| Vertical
Divergence |
±3.5° at 50% intensity |
| Horizontal
Output |
360° |
Operation |
| Minimum
Autonomy** |
150 Hours |
75 Hours |
| Minimum
Equivalent Peak Sun Hours to Maintain Minimum Autonomy |
3 Hours |
6 Hours |
| Latitude
Range*** |
55° S to 55° N |
| On/Off Level |
70/100 lux |
| Illumination
Technology |
16 or 24 LEDs, depending on color |
| Lifespan of
LEDs |
Up to 100,000 hours |
| Chromacity of
Color Output |
Meets IALA specifications |
| Available
Standard Flash Patterns(custom patterns
available) |
208 including steady-on |
Solar Panels |
| Type |
Mono-Crystalline
Potted with UV-protected polyurethane |
| Maximum Power |
5.6 Watts |
| Efficiency |
14% |
Battery |
| Type |
Pure-lead thin plate with starved-electrolyte |
| Nominal
Voltage |
4 Volts |
| Capacity |
15 Amp-hr at 10-hr discharge rate |
Construction |
| Lens Material |
Polycarbonate |
| Battery
Venting |
Vent at the bottom of the lantern |
| Sealing |
Self-contained unit, sealed with gaskets |
| Weight |
5.2 kg (11.5 lbs) |
Environmental and Electrical |
| Temperature
Range**** |
-40° to +80° C
(-40° to 176° F) |
| Waterproof |
As per IP67 (NEMA 6) |
| Salt Fog
Corrosion, Vibration |
As per TP1861E |
| Explosion
Resistance |
As per MIL-STD-810E
Method 511.3 |
| CE Approval |
As per EN 60945:1997 |
Quality Control and Patents |
| Quality
Assurance |
ISO 9001 |
| Trademarks and
Patents |
US Patents: 5,782,552 & 6,013,985
Other Patents Pending |
IR-PROG Infrared
Programmer, Models 601, 701 and 702 are
 user-programmable
using an optional infrared remote control. Functions within
these lights that are available through the remote control
include |
|
* All Flashing Light specifications are based on a 12.5% duty cycle
(code 064 - 15 flashes per minute).
** Actual figures depend on the intensity level setting.
*** Lights will function reliably at higher latitudes than 55° North
or South if intensity/autonomy is properly adjusted to suit operating
environment by an Authorized Representative.
**** Consistent ambient temperatures above +25°C (+77°F) may affect
overall battery life. Temperatures above +60°C (+140°F) may affect
output.
|
|
|
Model Ok702-GPS Marine
Up to 3 nautical miles (5.4km) Ok700 Series marine lights are the next generation
replacement for traditional 155mm 0.25 amp/0.5 amp navigation
lights. The Model Ok702-GPS is the world's most advanced,
fully integrated solar-powered LED three-nautical-mile (5.4km)
navigation light. Featuring a Global Positioning Satellite (GPS)
receiver, it installs in minutes, is completely self-contained
and requires no maintenance or servicing for the life of its
power storage pack (up to 5 years). The GPS receiver allows two
or more Ok702-GPS units to flash synchronously.
Originally designed and built under contract with the U.S. Coast
Guard, the 700 Series are the first solar-powered lanterns using
light emitting diodes (LEDs) to enter the U.S. Navigational Aid
System.
The Ok702 is the larger version of the two models available in the
700 Series; it is intended for use in regions where daily solar
illumination is greater than 1.0 hours of winter sunlight.
Fully-integrated, self-contained and watertight, the Ok700 Series
are used around the world for any marine application requiring a
marker light of 3 nautical miles of visibility.
Model Ok702-5
|
Specification |
Value |
|
Light Output |
Flashing* |
Steady |
Effective Intensity
Green, Amber, Red, White |
~18 Candela |
~6 Candela |
Nominal Night Range
Green, Amber, Red, White |
~3.2 NM |
~2.2 NM |
|
Vertical Divergence |
7° @ 50% Intensity |
|
Horizontal Output |
360° |
|
|
|
Operation |
|
Minimum Autonomy |
300 Hours |
150 Hours |
|
Minimum Equivalent Peak Sun
Hours to Maintain Minimum Autonomy |
1.5 Hours |
3 Hours |
|
Latitude Range |
55° S to 55° N |
|
On/Off Level |
70/100 lux |
|
Illumination Technology |
24 LEDs depending on color |
|
Lifespan of LEDs** |
Up to 100,000 hours |
|
Chromacity of Color Output |
Meets IALA specifications |
|
Available Flash Patterns
(custom patterns
available) |
208 including steady-on |
|
|
|
Construction |
|
Solar Panels |
Mono-Crystalline panel fully
encapsulated in UV-protected polyurethane
and domed for higher efficiency |
|
Battery |
Pure-lead thin plate with
starved-electrolyte |
|
Lens Material |
Polycarbonate |
|
Battery Venting |
Vent at base of unit |
|
Sealing |
Fully sealed, self-contained
unit |
|
Weight |
8.16 kg (18 lbs) |
|
|
|
Environmental and
Electrical |
|
Temperature Range*** |
-40° to +80° C
(-40° to 176° F) |
|
Waterproof |
As per IP67 (NEMA 6) |
|
Salt Fog Corrosion, Vibration |
As per TP1861E |
|
Explosion Resistance |
As per MIL-STD-810E
Method 511.3 |
|
CE Approval |
As per EN 60945:1997 |
|
|
|
Quality Control and
Patents |
|
Quality Assurance |
ISO 9001 |
|
Trademarks and Patents |
US Patents: 5,782,552 &
6,013,985
European Patent Application:96925627.0
Other patents pending |
|
|
* All
Flashing Light specifications are based on a 12.5% duty
cycle (code 064 - 15 flashes per minute).
** Amber, Red, Green: ~14 years to 80% of original
effective intensity when operated at night with a 12.5%
duty cycle.
*** Consistent ambient
temperatures above +25°C (+77°F) may affect overall
battery life. Temperatures above +60°C (+140°F) may
affect output. |
4 Nautical Miles
Model 704-5
The world's most compact, self-contained solar LED
marine light with 4 nautical miles (7.6 km) of output.
Removable battery pack extends unit life beyond 5 years.
Extended body houses large solar panels along with heavy
duty power storage. Additional patented domed solar
panel makes this configuration ideal for regions with
very low solar illumination. Model M704-5
Up to 4 nautical miles (7.4 km)
The Carmanah Model M704-5 4-NM (7.4 km) solar-powered
LED lanterns are the world's most advanced,
solar-powered LED navigational and hazard-marking
lanterns. They are completely self-contained, install in
minutes and require no maintenance or servicing for up
to five years.
The Model M704-5 is built for performance in harsh
weather conditions. The Model M704-5 uses an array of
ultra bright LEDs and can be programmed with over 200
flash patterns. Manufactured in accordance with ISO
9001:2000 Quality Assurance Standards, the Model M704-5
produces light output in IALA's four international
chromaticity colors: green, red, amber and white.
Through the innovative combination of solar power and
LED technology, the M704-5 lanterns charges during the
day, even under cloudy conditions, and turn on
automatically at night. Instead of relying on
short-lived incandescent bulbs, the M704-5 uses durable,
ultra bright light emitting diodes (LEDs), which have an
operating lifespan of up to 100,000 hours.
Carmanah's new optics and
lens design mean wider vertical divergence and greater
light uniformity Effective
Intensity
Green, Amber, Red, White
~36 Candela
Nominal Night Range2
Green, Amber, Red, White
~4 NM
Vertical Divergence 10°
Horizontal Output 360°
Operation
Autonomy3 at Full Charge 600 Hours
Minimum Equivalent Peak Sun Hours to Maintain Minimum
Autonomy 4.2 Hours
Latitude Range4 55° S to 55° N
On/Off Level 70/100 lux
Illumination Technology 8 Ultra Bright LEDs
Lifespan of LEDs5 Up to 100,000 hours
Chromacity of Color Output
Meets IALA specifications
Available Flash Patterns (custom patterns available) 256
including steady-on
Power Management System MicroSource®
Construction
Solar Panels Mono-Crystalline panel fully encapsulated
in UV-protected polyurethane
Battery Sealed lead-tin - recyclable
Lens Material UV stabilized polycarbonate
Battery Venting Vent at base of unit
Sealing Self-contained unit, sealed with gaskets
Weight 11.75 kg (26 lbs)
Lantern Base Marine-Grade
Aluminum
Mounting 3-, 4-, & 5-bolt mounting pattern
Environmental and Electrical
Temperature Range6 -40° to +80° C
(-40° to 176° F)
Waterproof As per IP67 (NEMA 6)
CE Approval As per EN 60945:1997
Trademarks and Patents
Trademarks and Patents US Patents: 5,782,552 & 6,013,985
European Patent App |
|
M708 Marine Lantern
For applications up to 6
nautical miles
Benefits
- Field-proven durability
- Over 250,000 installation
worldwide
- Robust, compact and fully integrated
design
- Easy, non-technical installation
- Maintenance-free operation
- Vandalism and theft resistant
- Resistant to the unrelenting
pounding of the sea
Features
- Minimum peak
intensity of 125 candela at the highest
intensity setting, and performance up to
6-nautical miles.
- Each lantern can be set for three
ranges:
- Low (minimum 25 candela peak
intensity)
- Medium
(minimum 60 candela peak intensity)
- High (minimum 125 candela peak
intensity)
- Fully configurable with 256 flash
patterns
- Optional GPS synchronization enables
two or more lanterns to flash in unison
- Available in all IALA chromaticity
colors – red, green, amber and white
- Four 4-watt solar panels
- Integrated bird deterrent
- Visual color indicator secured to
top of reflector
- Suitable for high intensity
navigation and hazard-marking
applications
|
|
|
Crouse-Hinds. Lighting The Way OkSolar.com and
IQAirport.com power it with
Green
reliable Solar Power contact us today!
L810 GENERAL uSE LED OBSTRUCTION LIGHT
ICAO Configurations
ICAO Red Lighting—Painted Tower/Red Lights for Night
ICAO White Lighting—White Lights for Day/White Lights for Night
ICAO Dual Lighting†—White Lights for Day/Red Lights for Night
Radio-Controlled Solar School Beacons
|
The SPDC/AC
unit
was designed to be easily expanded: power units can range from 2,000 Watts
to 10,000 Watts. Its flexible platform design allows it to be easily
customized for use with area lighting, remote communications, security
systems, and surveillance equipment, to name a few applications. Charge
power alone can be doubled or tripled with the addition of simple,
cost-effective photovoltaic capture equipment.
Pre-assembled &
Factory Tested
More Information
> |
|
IP Video Anywhere Solar Powered!
Protecting Critical
Government Infrastructure
Military and Homeland Surveillance
IP Video AnyWhere Solar Powered!
IP Video solutions are the next wave in CCTV surveillance. The
ability to monitor your systems from anywhere, IP video solution.
Keep an eye on your
critical facilities at all times.
With OkSolar’s OkIP Video Anywhere, you can monitor sites several
thousand miles away as if they were across the street. Our system
facilitates remote site surveillance through energy-independent
operation and allows video to be transmitted over IP without any
physical lines being installed. Companies with remote or hard to access
assets, such as oil and gas pipelines, bridges or rural properties, have
not had an effective, economical solution for protecting those assets.
Some of the features like automated archiving
allow you not only to track construction progress in real time but also
to retrieve past images which can be used to resolve issues quickly.
|
Traffic Warning Signals
Our 12', 2 Head, Solar powered school
warning flasher signal is the cost effective solution to your pedestrian safety
problems. More Information
> Traffic control lights, LED
Traffic signals Manufacturer & Distributor, School Zone LED, School Zone LED
flashing beacon, 24 7 hour led flashing beacon traffic, school zone, School
warning signals, 24 hours warning Flashers, Road way warning signals, pedestrian
crossing, railroad warning, ice on bridge warning, low water crossing, led
beacons, speed awareness displays, Solar Powered Pedestrian Beacon, Pedestrian
Beacons, 24/7 Flashing Beacon |
|
All components
needed for installation are included (except for the mounting pole). The
systems are designed for installation onto a wood, concrete, or metal
mounting pole. You may choose to use your own pole or we can quote the
poles separately from the lighting system itself.
 
These units can be used for: Area lighting, Billboards lighting, Dock
lights, Park lighting, Parking lot lighting, Parkway lighting, walkway
lighting, Street lighting, Transit Lighting, Outdoor area lighting
|
Easy to retrofit LED streetlights can easily
retrofit existing metal halide, high pressure sodium
and mercury vapor luminaries.
Your next schedule IQLED maintenance will be in 5 to
8
years
with our IQ Retrofit Lamps!
IQLED Unlike bulb streetlights,
IQLED lighting
modules produce very intense light in tightly
control IQLED directions. There is no longer a need for
reflectors or cut-off shields to minimize light
pollution and trespass. With IQLED energy usage less
than 20% and lifespan more than seven times that of
conventional streetlights, payback occurs very early
in a long life cycle.
If you are committed to
savings and reduce the level of light pollution
by using the most efficient IQ LED
street-light fixtures and employing the latest
design methods.
|
IQEnergy:
IQ Fuel
cells Are you tired of your devices
being left in the dark, when your solar energy system stops providing power?
Then IQ Fuel Cells are the perfect answer for you. Are now available as an alternative source
 for renewable energy.
Unlike traditional power generators, they don't require
gasoline to generate power. They also provide an alternative to solar
generators because they do not depend on any external power gathering
equipment. These units are compact, durable, and built to power a wide
range of applications.
The Best Generator Ever!
Applications: Airports,
Computer Rooms,
Hospitals,
Traffic,
UPS
Smart designs with
IQ Fuel Cells for smart energy applications Contact us today! >
|
|
Highly
automated communications process by which data are
collected from instruments located at remote or inaccessible points
and transmitted to receiving equipment for measurement, monitoring,
display, and recording can be found in our online store.
More Information
>
Products for material handling applications like
Underground Mining, Processing & Airport Transportation industries,
Military Applications, Whether your application requires SPEED
MONITORING, REMOTE CONTROLS.
|
|
Battery Backup Systems for LED Traffic Signs Increase the public safety
and reduced traffic congestion by allowing traffic lights to function even
during a power failure. A typical traffic signal
intersection experiences eight to ten local power outages annually.
With IQUPS battery backup power, some or all the traffic control signals
can continue to operate. This seamless switchover to battery power increases
public safety and eliminates the need to dispatch police or other service
personnel to direct traffic. If all traffic signals were converted to LEDs,
the battery backup system would allow full operation of the traffic signals
during a power outage, thus alleviating traffic congestion.
Important feature is the battery backup system’s ability to maintain the
memory of the traffic signal controller. The controller is responsible for
sequencing the on and off times of the various signals. With a battery
backup system, the controller’s memory can be maintained and return to
normal operation once the outage has ended. This feature has eliminated the
time spent to reprogram controllers after a power outage
Traffic IQUPS It is designed to provide backup power for critical LED
traffic light intersections. With 1,000 watts of true sinewave power
available, IQFuel Cell and maintenance free Deep cycle batteries.
Traffic IQUPS will drive most large LED systems. Its pure sinewave output is
cleaner than utility power, making it ideal for all loads.
Total distortion is typically less than 1.5%. Manufactured in the USA to the
highest standards possible, Traffic IQUPS system is the best choice for
critical load protection. power outage knocked out traffic lights, backup
generators, emergency generator
Depending on the consumers needs, the IQFuelCell automatically charges the
battery with up to 100 Ah per day. As independent power supply or in
combination with other systems, the IQFuelCell runs self-sufficiently for
months.
The circuit is fully protected via breakers and fuses on the AC input,
connection to the batteries, and DC loads. Outdoor, lockable, aluminum
enclosure includes tamper-proof hardware suitable for pole or wall mounting.
DC ripple <50mV. |
 LED
Explosion Proof use LED bulbs up to
12VDC, 24VDC, 120VAC 277VAC, 50 - 60 hertz
UL Listed for Standard 844
IQLED has been making Explosion proof Lighting systems
Construction Features Lamp compartment is factory sealed from wiring
chamber, eliminating on-the-job sealing. Inspection hole provides easily
accessible splice space. There is nothing to hold while splicing to
line. Set screw to stem keeps fixture from turning during relamping.
Three close-up plugs furnished with four hole junction box. Mounting
lugs are standard.
Lamp: LED 400+ Super Bright LED's
Housings: Heavy cast aluminum. Unit
withstands 1490 lbs. per square inch hydrostatic
pressure during UL testing
Wiring: Wiring is factory sealed.
Inspection hole provides easy access to splice
compartment
Globe: Impact and heat resistant clear
prismatic design affords excellent light control
Finish: Silver Gray Epoxy powder coat
Reflectors: Heavy gauge aluminum with highly
reflective white acrylic finish
Socket: Medium base glazed porcelain. Leads
pass through sealing compound that separates lamp
chamber from wiring compartment. Heavy gauge nickel
plated copper components. Spring loaded center
contact
|
|
Off-grid combined wind and diesel solutions for
island nations, farms, remote areas, cell
towers, exploration equipment, backup power &
water pumps for natural gas mines; rapid
deployment diesel & wind solutions (to include
airdrop) to disaster areas for power to
emergency and medical equipment, water pumps;
on-grid applications for farms, factories,
remote communities; and wind farm deployments.
Available in 3Q 2007/08
|
|
|
|
Traffic Enclosures and Cabinets |
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
|
Increase your
Security and Visibility as Navigational Aids, Road Signs whit
Maintenance Free Self-Contained Solar Powered Lights.
Zero maintenance, self-contained solar lights with 1- to 5 mile visibility
NEW! self-contained, GPS-synchronized marine
lights now available. Visual Demonstration available
Click
Here!
|
|
These are a new line of
Self-Contained Solar Powered Lights well engineered using
state-of-the-art technology and practical for multiple applications
ranging from marine lighting, to emergency phone booth lighting, to
airport security markers for parked planes. The application of these
lights is limited by your imagination only. They are very compact
and easy to use - no more problems with with bulbs, batteries and
maintenance. Photons are converted by an integrated solar cell in
the top of each unit and the charge is stored internally. The time
required to charge Lights varies from eight hours for an overcast
day to 45 minutes on a clear day. The light-emitting diodes (LEDs)
flash at a rate designed for the application
|
|
Aviation
|
|
Marine:
|
|
Traffic
Controls
LED Obstruction Light FAA
Type: L-810 Steady-Burning
Solar Powered FAA approved L-810, certified and tested ICAO
Type: Low Intensity Obstacle Light Solar powered L-810 Aviation
Obstruction Light L-810 Double Obstruction
Solar-powered L-810 Aviation
Obstruction Light, solar operated FAA L-810 Obstruction LED Light,
FAA L810 LED Airport Lighting - LED Obstruction Lighting,
Manufacturer of solar FAA approved airfield lighting products.
L861, L862, L862SE, Elevated lights, airport lighting, power and
control, airport regulators, lighting control systems, PAPI, REILSs,
windsocks, heliport, airfield lamps, airport lamps, airfield
lighting FAA L-810 LED Double Obstruction IQAirport.com has
developed the 103400 (Solar-powered L-810 Aviation Obstruction
Light) packaged system to provide obstruction lighting for towers
and structures. The 103400 (Solar-powered L-810 Aviation Obstruction
Light) is a complete packaged solar power system and LED High Power
Obstruction Light. The system uses an FAA type L-810 single or
double red LED obstruction light. Power to the light is supplied by
a IQUPS VDC solar power system consisting of a solar module, sealed
maintenance-free batteries, and a temperature-compensated
Microprocessor charge controller with day/night detection. The
entire system is designed for quick installation and can be mounted
to a 2” SCH40 pole (2.375” O.D.). An LED light is used for low
power consumption. Day/night detection of the obstruction light is
controlled by the Microprocessor solar charge regulator which uses
the solar array to sense day/night conditions. The solar regulator
also prevents the battery from being overcharged or deep discharged.
An integral temperature sensor automatically adjusts the battery
charge voltage to compensate for temperature fluctuations for
extended battery life. The 103400 (Solar-powered L-810 Aviation
Obstruction Light) packaged system is the optimal choice for FAA
obstruction lighting applications where reliability is a must.
Complete packaged solar power system and Obstruction Light. The
system uses an FAA type L-810 single or double red LED obstruction
light. IQAirport.com 103400 series (Solar-powered L-810 Aviation
Obstruction Light) system are the optimal choice for obstruction
lighting applications where reliability is a must.
USING SOLAR POWER FOR AIRPORT OBSTRUCTION LIGHTING FAA information
and guidance on using solar power supplies for airport obstruction
lighting.
|
Solar Powered Crane Obstruction Warning Light.pdf
More
Information on solar Powered Crane Obstruction Lights
Heliport
Lighting, Obstruction Lighting, Airfield Lighting,
FAA Windcone, Aviation Lights, Airport Taxiway
Lights, Perimeter Light, Wind Cone, FAA Certified
Radio-Controlled Solar School Beacons |
|
|
Solar Powered Taxiway, Solar-Powered LED Aviation Lights,
solar-powered LED taxiway lights with optional deactivation switches |
| Wind Sock Item# 104100
Solar Windsock Light provides users with a complete,
reliable and low maintenance solution to windsock illumination.
Solar Windsock Light provides users with a complete,
reliable and low maintenance solution to windsock illumination.
This complete windsock lighting kit incorporates four (4) 104100
lights mounted onto 12mm powder-coated square tubing arms, a 120watt
multicrystalline solar module and mounting bracket, and 96Ah SLA
battery housed in a rotationally molded weatherproof battery box
with galvanized lockable cage for improved security.
Each 104100 light incorporates 9 ultra-high intensity power LEDs
as a light source offering up to 100,000 hours of service- no need
to change any globes! And with low power consumption and external
sun-switch for automatic night activation, the 104100-4WL is a
fantastic alternative to traditional hard-wired or fluorescent
products.
The 104100 can be installed immediately, facing either down over
the top of the windsock, or upward from beneath, and requires no
costly underground wiring. The complete kit comes packaged in a
155x69x76cm pallet for ease of shipping- a complete unit ready for
immediate installation!
Airport Windsocks
obstruction light airport
lighting airport equipment airport runway runway light marking
runway obstruction light airport light runway lighting aviation
light airport runway light crane light aircraft strobe light airport
lighting runway airfield light runway safety obstruction tower
lighting lighting taxiway airport company lighting airport lighting
equipment airport landing light airport ground support equipment
runway taxiway runway lighting system marker runway led obstruction
light aircraft obstruction light taxiway light airport light
portable led obstruction lighting aircraft warning |
|
 
L861 Domes & Lenses
  |
Technical Specs
- Federal Aviation Administration (FAA
US)
- Civil Aviation Authority (CAA
UK)
|
|
Go to CHECK PRICES
> Visual Signals >
... |
|
      
   |
|
  |
|
Beacons By the Size OkSolar
Beacons by OkSolar manufacturer of high quality strobe and warning
light systems. We design our strobe warning lights for various
industries such as Police,
Fire and Rescue, Industrial, and Towing.
We have a complete line of
Traffic Control Systems as well. We can
size any requirement that you may have. Whether your application requires,
Visual Signals, Audible Signals, Wireless controls
Stop Button and
secure wireless
we can build a system to fit your requirements and your budget.
Applications
include: Products for material handling
applications like Underground Mining, Processing & Airport Transportation
industries, Military Applications, Whether your application requires SPEED
MONITORING, REMOTE CONTROLS,
Security environments we can OEM at your specs, Remote areas Control and
Visualization.
Visual and Airport Suppliers
Find Runway lights, runway lighting, Runway End Identifier Lights,
Heliport Lighting/Navigational Aids, and Obstruction Lights,
Transportation, Airports, Operations and Maintenance, Supplies and
Equipment. Signal Solutions for industrial, commercial, institutional and
security applications. Everything you need to satisfy your customer for
OSHA, ADA or Process control signal requirements.
Automation signaling works best when
you partner with an experienced source, one with a track record of product
innovation and technical leadership.
OkSolar signals come with innovative features that meet all your signaling
applications needs. From simple horns and bells to demanding factory
automation signaling utilizing your PLC or Devicenet network, wireless,
powered by Solar and Fuel Cells, OkSolar provides complete factory
solutions. Find out what makes signaling sense to you!
|
-
Visual Signals
-
Visual
signals Airport
-
Visual signals Airport
Solar Powered
-
Visual Signals
Hospital
-
Visual
Signals Transportation
-
Visual
Signals Solar Powered
-
Solar Lighting Brick Multi Color
  
 |
Solar Powered Obstruction
Lights, Hazard Beacons and Airport Lighting,
Airfield Lights Obstruction Lights Hazard
Beacons Airport Lighting.
solar
red blinking light for a height obstruction
crane boom, Obstruction Lights, Hazard
Beacons and Airport Lighting, Airfield
Lights Obstruction Lights Hazard Beacons
Airport Lighting.
solar red blinking light for
a height obstruction crane boom Advanced
solar-powered LED airfield lighting solution
for permanent, temporary and emergency
airfield applications. Solar-powered LED
aviation lights are used extensively for
defense, civilian and private applications
worldwide. They are ultra-compact,
self-contained, shock-proof, vibration-proof
and field-proven to withstand the harshest
of environmental conditions.
103900IR (Solar Powered) Infrared
The 103900 is a robust, completely
self-contained solar-powered LED aviation
light, designed for a range of installations
including strategic and remote runway edge
lighting, and obstruction lighting.
Incorporating the latest LED technology, the
103900 provides up to 12 years of reliable
service- no more globes to change!
The unit is made from cast aluminum, subject
to 7-stage powder-coating in high visibility
colors for daytime recognition. Four
premium-grade solar modules are integrated
into the assembly and mounted to collect
sunlight at all angles.
The solar array charges an internal 7.5Ah
battery during daylight hours, and at dusk
the light will automatically begin
operation.
The unit can be supplied in varying color
outputs to suit applications including
runway edge lighting (white) and threshold
marking (red/green sectored).
The tough polycarbonate aviation lens is
specifically designed for use with LEDs to
maximize light intensity and uniformity.
For defense applications the unit is
available in infrared (IR).
This equipment meets the requirements of a
Low Intensity Type A Obstruction Light, ICAO
Annex 14 volume 1,
|
Light Source |
20 ultra-high
intensity LEDs |
|
Flash Color |
Red White Yellow Blue
Green |
|
Intensity |
>25cd flashing, >10
fixed-on |
|
Horizontal Output |
360 |
|
Vertical Divergence |
9 degrees |
|
Flash Settings |
>250 including
fixed-on (user-adjustable) |
|
Lamp Life |
100,000 hours |
|
Current Draw |
120mA |
|
Circuit Protection |
Integrated |
|
Operating Voltage |
12v |
|
Autonomy |
>20 days (14 hour
darkness, 12.5% duty cycle) |
|
Solar Module Type |
Multicrystalline |
|
Output |
8watt (4 x 2watt) |
|
Battery Type |
SLA (Sealed Lead
Acid) |
|
Battery Capacity |
7.5Ah |
|
Battery Voltage |
12v |
|
Body Material |
7-stage powder-coated
aluminum |
|
Lense Material |
LEXAN® Polycarbonate
- UV stabilized |
|
Mounting |
4 x 7mm holes on
200mm PCD |
|
Height (cm/inches) |
35.5/14 |
|
Width (cm/inches) |
24.5/9.6 |
|
Mass (Kg/lbs) |
6.4/14.1 |
|
CE |
EN61000-6-3:1997,
EN61000-6-1:1997 |
|
Quality Assurance |
ISO9001:2000 |
|
Patents |
US Pat. No.
6,667,582. AU Pat. No. 778,918 |
|
Trademarks |
IQAVLITE® is a
registered trademark |
IQLED Solar Light 1.8Km Solar Light Item# 103500
Solar red blinking light for a
height obstruction crane boom Advanced
solar-powered LED airfield lighting solution for
permanent, temporary and emergency airfield
applications. Solar-powered LED aviation lights
are used extensively for defense, civilian and
private applications worldwide. They are
ultra-compact, self-contained, shock-proof,
vibration-proof and field-proven to withstand
the harshest of environmental conditions. Suitable
for a range of applications including barricade
lighting & general hazard marking, & is used by
some of the world's largest mining companies to
mark haul routes.
IQLED Solar Light 3.6Km Solar Light Item# 103700
The 103700 solar LED light provides in excess of 3.6km visible
range, & is suitable for a variety of applications including general
hazard, barricade & low-intensity obstruction lighting.
The 103700 solar LED light provides in excess of 3.6km
visible range, and is suitable for a variety of applications
including general hazard, barricade and low-intensity obstruction
lighting.
Designed to be maintenance-free and have a service life of up to
12 years, the popular 103700 model boasts user-adjustable intensity
settings and can be set on-site to either fixed-on or flashing
operation. The light is simply switched 'ON', and the unit is ready
for immediate operation. Once installed, the 103700 requires no
operator intervention.
The internal solar module charges the battery during daylight
hours, and at dusk the light will automatically begin operation -
once the ambient light threshold drops sufficiently. The battery is
housed in a sealed compartment allowing the battery to be changed
after years of service.
Coupled with the latest LED technology, and a highly efficient
DC/DC converter, the light may provide over 25 days of continuous
operation without sunlight. The 103700 comes with a large 200mm OD
base pattern, and is available with voltage-free contact for remote
monitoring
IQLED Solar Light Item# 103800
The solar powered 103800 light offers enormous benefits over
traditional battery & hard-wired airfield lights including low
maintenance & no underground wiring. The perfect solution for
emergency airstrip, caution, taxiway (ICAO) & threshold lighting.
The solar powered 103800 airfield light offers enormous
benefits over traditional battery and hard-wired airfield lights
including low maintenance and no underground wiring.
These completely self-contained LED lights are designed to suit a
range of aviation and general applications including emergency
airstrip, caution, taxiway (ICAO Approved), and threshold lighting.
The unit has two high-performance solar modules mounted within
the lens, which maximize solar collection and provide reliable
operation in a range of environment conditions.
The focal plane of the light is designed to provide a vertical
divergence of between 0 and +10 degrees, and the user-replaceable
battery ensures a service life of up to 12 years.
The 103800 is made from tough, durable UV stabilized LEXAN®
polycarbonate, and incorporates an internal photodiode for automatic
night activation once the ambient light threshold drops
sufficiently.
Completely self-contained and able to be installed in
minutes, the 103800 is the preferred choice of remote airfields -
where the units mark indigenous airstrips, and regional council's
and mining strips around the country
also available with an optional ON/OFF switch
for temporary installations such as worksites.
|
The Airfield and Marine
|
1 Mile Solar LED Lights
The OkSL15
1 mile LED compact lantern is designed to be
maintenance-free and have a service life of over 5 years.
The unit uses 4 ultra-high intensity LEDs as a light source,
and is made entirely from tough U.V. stabilized poly
carbonate, making it ideal for aquaculture, hazard &
perimeter marking, or transport/railway use.
The OkSL15 1 mile LED compact light is exceptional value and
incorporates some of the most advanced technology available.
In the tradition of Sealite lanterns, the OkSL15 is designed
to be maintenance-free and have a service life of over 5
years. This makes the unit ideal for hazard marking,
aquaculture, navigation, perimeter lighting and a host of
other applications.
The units use 4 LEDs as a light source, and incorporate a
1.6Ah high-grade
 user-replaceable
NiMH battery pack coupled with a 0.43watt solar module. The
lens is sealed to the base using an ultrasonic welding
technique, making the unit completely waterproof and capable
of complete immersion. The waterproof rating of IP68 is
unmatched by other manufacturers. Both the lens and base are
made from U.V. stabilized polycarbonate to provide excellent
impact-resistance. The lens also incorporates a bird-spike
deterrent.
Once installed, operation of the OkSL15 1 mile light requires
no operator intervention. There is a choice of 16
factory-set flash characters, and the unit is supplied ready
for immediate operation. During daylight hours the solar
module will charge the battery, and the lantern will
automatically begin operation at dusk – once the ambient
light threshold drops sufficiently. Coupled with LED
technology, and a highly efficient DC/DC converter, the
lantern may provide over 30 days of continuous operation
without sunlight.
|
|
|
SPECIFICATIONS OkSL15
|
|
Range (Nautical Miles): |
1nm |
|
Colors: |
Red - White - Yellow - Blue - Green |
|
Body: |
U.V. stabilized polycarbonate |
|
Mounting: |
4 x 4mm mounting holes |
|
Available Flash Characteristics: |
16 factory-set as listed in download specifications
|
|
Battery: |
1.6AH NiMH |
|
Lenses: |
U.V. stabilized / optical grade polycarbonate
|
|
Light Source: |
4 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
minimal |
|
Autonomy: |
30 days |
|
Lamp Life (hrs minimum): |
100,000hrs |
|
Solar Cells: |
0.43watt |
|
Height (Cm/Inches): |
14.2/5.6 |
|
Width (Cm/Inches): |
13.2/5.2 |
|
Weight (Kg/Lbs): |
0.6/0.88 |
|
2 Mile Solar LED Lights
 The
OkSL60 & OkSL70 lanterns are the most advanced and versatile
compact marine lanterns
available.
Both have over 250 flash characters, adjustable on-site by
the user. The units also boast a completely sealed battery
compartment, which enables the battery to be changed after
years of service.
The OkSL70 unit excels in its ability to operate reliably in
low-sunlight conditions, through the use of the Ok-Sea light
solar collection lens, and dual high-performance solar
modules - tilted to
face the sun.
OkSL60 Solar LED Lantern The OkSL60 2 mile solar-powered LED
lantern is maintenance-free and has a service life of over 5
years, extended through easy battery replacement. The unit
is ideal for navigation, hazard lighting,
 aquaculture,
perimeter lighting and a range of other applications.
The lantern uses 6 LEDs as a light source, and incorporates
a 4Ah high-grade NiMH battery pack coupled with a 1.3watt
solar module. The lantern is completely sealed and vented to
alleviate pressure build-up through air exchange, without
the moisture ingress. The light has been independently
tested to IP68 for water ingress, and is capable of
prolonged immersion. Both the lens and base are made from UV
stabilized polycarbonate to provide excellent
impact-resistance and a corrosion-free life.
The OkSL60 is extremely versatile, and designed to offer the
user enormous flexibility. The lantern can be easily set
on-site to any of over 250 IALA recommended flash
characters, and any of 4 intensity settings. For easy
storage and shipping, the lantern can be deactivated via an
‘on/off’ toggle switch. The base of the lantern incorporates
a unique sealed battery compartment, allowing the user to
easily replace the battery after years of service.
The lantern is simply switched ‘on’, and the unit is ready
for immediate operation. Once installed, operation of the
OkSL60 requires no operator intervention. During daylight
hours the solar module will charge the battery, and the
lantern will automatically begin operation at dusk – once
the ambient light threshold drops sufficiently. Coupled with
LED technology, and a highly efficient DC/DC converter, the
lantern may provide over 25 days of continuous operation
without sunlight.
|
SPECIFICATIONS OkSL60
|
|
Range (Nautical Miles): |
2+ nautical miles |
|
Colors: |
Red - White - Yellow - Blue - Green |
|
Body: |
U.V. stabilized polycarbonate |
|
Mounting: |
4 * 4mm mounting holes |
|
Available Flash Characteristics: |
256 IALA recommended / User adjustable |
|
Battery: |
4AH NiMH |
|
Lenses: |
U.V. stabilized / optical grade polycarbonate
|
|
Light Source: |
6 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
85mA |
|
Autonomy: |
25 days |
|
Lamp Life (hrs minimum): |
100,000hrs |
|
Solar Cells: |
1.3 watt |
|
Height (Cm/Inches): |
23.7/9.6 |
|
Width (Cm/Inches): |
17.6/6.8 |
|
Weight (Kg/Lbs): |
1/2.2 |
|
Unit Price (US $): |
312.00 |
|
Shipping (US $): |
20.00 |
|
Option |
Mounting plate |
|
OkSL70 Dual Module 2 mile Lantern
The OkSL70 2 mile compact LED lantern is the most advanced
and versatile compact lantern on the market. The dual solar
module unit is designed for low-medium sunlight conditions
and has proven its
 reliably
in regions such as Britain and North America. Users are
continually pleased at the ease of battery replacement. The
unit is ideal for navigation, hazard lighting, aquaculture,
perimeter lighting and a range of other applications.
The lantern uses 6 LEDs as a light source, and incorporates
a 4Ah high-grade NiMH battery pack coupled with two 1.8watt
solar modules of exceptionally high efficiency. The shape of
the lens, and the complexity of the tooling and molding
technique highlight the depth of knowledge and experience of
staff. The design, based on computer-modeling data,
successfully allows the lens to capture optimum levels of
low sunlight, by tilting the solar modules towards the sun.
Both the lens and base are made from UV stabilized
polycarbonate to provide excellent impact-resistance. The
lantern is completely sealed and vented to alleviate
pressure build-up through air exchange, without moisture
ingress.
The lantern can be easily set on-site to any of over 250
IALA recommended flash characters, and any of 4 intensity
settings. For easy storage and shipping, the lantern can be
deactivated via an ‘on/off’ toggle switch. The base of the
lantern incorporates a unique sealed battery compartment,
allowing the user to easily replace the battery after years
of service.
Once installed, operation of the OkSL70 requires no operator
intervention. During daylight hours the dual solar modules
will charge the battery, and the lantern will automatically
begin operation at dusk – once the ambient light threshold
drops sufficiently. Coupled with LED technology, and a
highly efficient DC/DC converter, the lantern may provide
over 25 days of continuous operation without sunlight.
|
SPECIFICATIONS OKSL-70
|
|
Range (Nautical Miles): |
2 miles |
|
Colors: |
Red - White - Yellow - Blue - Green |
|
Body: |
U.V. stabilized polycarbonate |
|
Mounting: |
Industry standard mounting |
|
Available Flash Characteristics: |
256 IALA recommended / User adjustable |
|
Battery: |
4AH NiMH |
|
Lenses: |
U.V. stabilized / optical grade polycarbonate
|
|
Light Source: |
6 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
85mA |
|
Autonomy: |
25 days |
|
Lamp Life (hrs minimum): |
100,000 |
|
Solar Cells: |
dual 1.8watts (each) |
|
Height (Cm/Inches): |
22.4/8.8 |
|
Width (Cm/Inches): |
23/9.1 |
|
Weight (Kg/Lbs): |
1.1 / 2.3 |
|
Option |
Mounting plate |
|
OkSL125 with in-built GPS receiver
Utilizing latest advancements in GPS technology, Sealite Pty
Ltd has
 developed
an internal synchronization system for the popular OkSL125 5 &
6 nautical mile range of LED lanterns. The OkSL125-GPS
represents the next generation of marine lighting - as it is
built within the unit, and requires no external wiring,
aerial or operator intervention. If the lanterns are set to
the same flash character, their flash rates will
synchronized over an unlimited distance within a few minutes
of operation. Full product details can be found on the
OkSL125
section of the online catalogue.
Synchronization is the preferred choice of sea pilots
wishing to see a clear outline of a channel or entrance to a
harbour surrounded by background lighting. It is the future
for channel and entrance marking. A major advantage of the
internal GPS based system is that the GPS is not limited by
range or line-of-sight and the lantern maintains its IP68
water immersion rating. A number of Australian ports have
already commenced conversion programs, and many are
evaluating the new OkSL125-GPS against their requirements.
OkSL125-GPS light flashing in synchronization
OkSL125-GPS Synchronized Lantern The OkSL125-GPS is a 5
- 6 nautical mile LED lantern that provides the user with
the ability to mark a channel, port or river with
independent operating beacons that all flash in
synchronization. This improves the effectiveness of marker
lights by highlighting the channel, port or river outline
each time the synchronized lights turn on.
For a Visual
demonstration of the effectiveness of the synchronization
lighting of the lanterns to increase their visibility
against background lights
Click Here!
With advances in electronics, Sealite has been able to
produce a light that incorporates a Global Positioning
System (GPS) receiver. No additional power supplies, aerials
or control systems are required. The OkSL125-GPS is a
microprocessor-based system that has been designed to
provide maximum reliability and performance of the beacon
over a wide range of environmental conditions.
The advanced circuitry of the lantern is protected from the
marine environment through the bonding of the lens to the
polycarbonate base, which is colored to allow for easy
identification. The base includes a membrane pressure-vent
to release any internal pressure build-up resulting from the
changes in environmental temperature, without moisture
ingress. The lantern also utilizes Sealite’s LED Reflector
(U.S. Pat. No. 6,667,582) to increase intensity and provide
an even 360° horizontal beam.
Each light operates independently and requires no operator
intervention. At dusk the light sensor will turn the light
on. Synchronization is achieved using an internal algorithm
based on the highly accurate time base and time data
received from the satellites. The satellite data is provided
from a number of earth stations using atomic clocks as the
time base. If time data is available the light will come on
synchronized to every other light with the same selected
flash code.
|
SPECIFICATIONS OkSL-125-GPS
|
|
Range (Nautical Miles): |
5 - 6 nautical miles |
|
Colors: |
Red - White - Yellow - Blue - Green |
|
Body: |
U.V. stabilised polycarbonate |
|
Mounting: |
Industry standard mounting |
|
Available Flash Characteristics: |
256 IALA recommended / User adjustable |
|
Battery: |
N/A |
|
Lenses: |
U.V. stabilised / optical grade polycarbonate
|
|
Light Source: |
36 / 72 / 108 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
350mA ON - 30mA OFF |
|
Autonomy: |
N/A |
|
Lamp Life (hrs minimum): |
100,000hrs |
|
Solar Cells: |
N/A |
|
Height (Cm/Inches): |
23.7/9.6 |
|
Width (Cm/Inches): |
17.6/6.8 |
|
Weight (Kg/Lbs): |
1.1 / 2.3 |
|
Unit Price (US $): |
0.00 |
|
Shipping (US $): |
0.00 |
|
103910 Solar Runway Edge Light is ICAO Approved for use
in aerodromes with either extraneous lighting (50cd), or
without extraneous lighting (25cd).
 Solar
Aviation Light robust, completely self-contained
solar-powered LED light designed for a range of aviation
applications including runway and threshold lighting. The
103910 Solar Runway Edge Light is ICAO Approved for use in
aerodromes with either extraneous lighting (50cd), or
without extraneous lighting (25cd). The unit is made from
cast aluminum, subject to 7-stage powder-coating, and four
premium-grade solar modules are integrated into the assembly
and mounted to collect sunlight at all angles. The solar
array charges the 20Ah battery during daylight hours, and at
dusk the light will automatically begin operation. The tough
polycarbonate lens is specifically designed for use with
LEDs, and the patented internal 360° Omni directional LED
Reflector ensures consistency of light output and intensity.
The in-built solar array will continue to charge the battery
throughout daylight hours and at dusk an internal
photo-sensor automatically activates the light.
OkSL-300 and OkSL-400 Self-Contained Lights Released
Sealite is pleased to announce the release of the new
OkSL-300 & OkSL-400 range of self-contained lights. Designed
to comply with requirements for 3nm and 4nm visibility
ranges, the SLC models are a compact unitised design ready
for immediate installation, and will provide years of
maintenance-free service. Four premium-grade glass-front
solar modules are embedded in the rotationally molded
housing, and provide excellent impact, vandal and theft
resistance.
Full product details and downloads are available through the
online catalogue. For purchase information please contact
Sealite or any of the Authorized Sealite Distributors as
listed on this website.
High visibility IALA colors
The OkSL-300 is a self-contained 3nm Solar LED marine
light designed for immediate installation and
low-maintenance .
The lantern has 4 premium grade solar modules imbedded in a
rotationally molded housing - providing high visibility IALA
colours, excellent sunlight collection and vandal
resistance. The light may be set to any of 256 IALA
recommended flash rates, which are adjustable on-site
without the need for external devices. In addition, and the
light features the Sealite LED Reflector (U.S. Pat. No.
6,667,582) which increases the intensity and uniformity of
the horizontal output.
Sealite's tough polycarbonate lens is specifically designed
for use with LEDs, and incorporates an environment-friendly
spike - deterring unwelcome bird life.
The SLC300 can be easily installed in minutes, and requires
no further operator intervention.
|
SPECIFICATIONS OkSL-300
|
|
Range (Nautical Miles): |
3nm |
|
Colors: |
Red - White - Yellow - Blue - Green |
|
Body: |
U.V. stabilized polyethylene |
|
Mounting: |
4 x 8mm mounting holes |
|
Available Flash Characteristics: |
256 IALA recommended / User adjustable |
|
Battery: |
7.5AH Sealed Lead Acid |
|
Lenses: |
U.V. stabilised / optical grade polycarbonate
|
|
Light Source: |
20 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
110mA nominal |
|
Autonomy: |
30 days |
|
Lamp Life (hrs minimum): |
100,000hrs |
|
Solar Cells: |
4 x 2watt Premium Grade |
|
Height (Cm/Inches): |
41/16.1 |
|
Width (Cm/Inches): |
27/10.6 |
|
Weight (Kg/Lbs): |
8/17.6 |
|
OkSLB-600 Light Buoy Assembly
The OkSLB-600 assembly is a complete short-range
buoy-lantern combination ready for immediate installation.
Typical applications include day and night channel, speed
 zone
and restricted area marking.
The assembly includes the popular OkSL15 1 mile compact
lantern, which is delivered factory-set to your choice of 16
available flash codes (as specified in the OkSL15 PDF
document). The lantern is completely sealed, and uses four
LEDs as a light source.
The OkSLB-600 is extremely long-lasting, and is molded in
strong, durable U.V. stabilized polyethylene. The base of
the buoy is sand-filled, and the top section is polyurethane
foam filled, providing excellent buoyancy and stability. A
large mooring chain attachment point accommodates a 16mm
shackle or 12mm silver rope.
The complete assembly is only 19kg (41.8lb) and is
exceptional value for money. The unit is available in
standard high visibility Yellow, Green, Red and White. The
listed freight charge includes airfreight to your nominated
air-cargo terminal in most destinations in the United States
or Canada. Please contact Sealite for volume orders, so we
can determine the most economical means of shipping.
|
SPECIFICATIONS OkSLB600-Lighted
|
|
Range (Nautical Miles): |
1 mile |
|
Colors: |
Red White Yellow Green |
|
Body: |
Polyethylene (buoy) |
|
Mounting: |
4 * 4mm mounting holes (light) |
|
Available Flash Characteristics: |
16 factory-set as listed in down-load specifications
|
|
Battery: |
1.6AH NiMH |
|
Lenses: |
U.V. stabilized / optical grade polycarbonate
|
|
Light Source: |
4 ultra-high intensity LEDs |
|
Horizontal Output: |
360 degrees |
|
Vertical Divergence: |
9 degrees |
|
Current Draw (mA): |
minimal |
|
Autonomy: |
15 days |
|
Lamp Life (hrs minimum): |
N/A |
|
Solar Cells: |
0.43watt |
|
Height (Cm/Inches): |
125/49.2 |
|
Width (Cm/Inches): |
60/23.6 |
|
Weight (Kg/Lbs): |
19/41.8 |
|
|
|
L810 GENERAL uSE LED OBSTRUCTION LIGHT
ICAO Configurations
ICAO Red Lighting—Painted Tower/Red Lights for Night
ICAO White Lighting—White Lights for Day/White Lights for Night
ICAO Dual Lighting†—White Lights for Day/Red Lights for Night
|
|
The SPDC/AC
unit
was designed to be easily expanded: power units can range from 2,000 Watts
to 10,000 Watts. Its flexible platform design allows it to be easily
customized for use with area lighting, remote communications, security
systems, and surveillance equipment, to name a few applications. Charge
power alone can be doubled or tripled with the addition of simple,
cost-effective photovoltaic capture equipment.
Pre-assembled &
Factory Tested
More Information
> |
|
IP Video Anywhere Solar Powered!
Protecting Critical
Government Infrastructure
Military and Homeland Surveillance
IP Video AnyWhere Solar Powered!
IP Video solutions are the next wave in CCTV surveillance. The
ability to monitor your systems from anywhere, IP video solution.
Keep an eye on your
critical facilities at all times.
With OkSolar’s OkIP Video Anywhere, you can monitor sites several
thousand miles away as if they were across the street. Our system
facilitates remote site surveillance through energy-independent
operation and allows video to be transmitted over IP without any
physical lines being installed. Companies with remote or hard to access
assets, such as oil and gas pipelines, bridges or rural properties, have
not had an effective, economical solution for protecting those assets.
Some of the features like automated archiving
allow you not only to track construction progress in real time but also
to retrieve past images which can be used to resolve issues quickly.
|
Traffic Warning Signals
Our 12', 2 Head, Solar powered school
warning flasher signal is the cost effective solution to your pedestrian safety
problems. More Information
> Traffic control lights, LED
Traffic signals Manufacturer & Distributor, School Zone LED, School Zone LED
flashing beacon, 24 7 hour led flashing beacon traffic, school zone, School
warning signals, 24 hours warning Flashers, Road way warning signals, pedestrian
crossing, railroad warning, ice on bridge warning, low water crossing, led
beacons, speed awareness displays, Solar Powered Pedestrian Beacon, Pedestrian
Beacons, 24/7 Flashing Beacon |
|
All components
needed for installation are included (except for the mounting pole). The
systems are designed for installation onto a wood, concrete, or metal
mounting pole. You may choose to use your own pole or we can quote the
poles separately from the lighting system itself.
These units can be used for: Area lighting, Billboards lighting, Dock
lights, Park lighting, Parking lot lighting, Parkway lighting, walkway
lighting, Street lighting, Transit Lighting, Outdoor area lighting
|
Easy to retrofit LED streetlights can easily
retrofit existing metal halide, high pressure sodium
and mercury vapor luminaries.
Your next schedule IQLED maintenance will be in 5 to
8
years
with our IQ Retrofit Lamps!
IQLED Unlike bulb streetlights,
IQLED lighting
modules produce very intense light in tightly
control IQLED directions. There is no longer a need for
reflectors or cut-off shields to minimize light
pollution and trespass. With IQLED energy usage less
than 20% and lifespan more than seven times that of
conventional streetlights, payback occurs very early
in a long life cycle.
If you are committed to
savings and reduce the level of light pollution
by using the most efficient IQ LED
street-light fixtures and employing the latest
design methods.
|
IQEnergy:
IQ Fuel
cells Are you tired of your devices
being left in the dark, when your solar energy system stops providing power?
Then IQ Fuel Cells are the perfect answer for you. Are now available as an alternative source
for renewable energy.
Unlike traditional power generators, they don't require
gasoline to generate power. They also provide an alternative to solar
generators because they do not depend on any external power gathering
equipment. These units are compact, durable, and built to power a wide
range of applications.
The Best Generator Ever!
Applications: Airports,
Computer Rooms,
Hospitals,
Traffic,
UPS
Smart designs with
IQ Fuel Cells for smart energy applications Contact us today! >
|
|
Highly
automated communications process by which data are
collected from instruments located at remote or inaccessible points
and transmitted to receiving equipment for measurement, monitoring,
display, and recording can be found in our online store.
More Information
>
Products for material handling applications like
Underground Mining, Processing & Airport Transportation industries,
Military Applications, Whether your application requires SPEED
MONITORING, REMOTE CONTROLS.
|
|
Battery Backup Systems for LED Traffic Signs Increase the public safety
and reduced traffic congestion by allowing traffic lights to function even
during a power failure. A typical traffic signal
intersection experiences eight to ten local power outages annually.
With IQUPS battery backup power, some or all the traffic control signals
can continue to operate. This seamless switchover to battery power increases
public safety and eliminates the need to dispatch police or other service
personnel to direct traffic. If all traffic signals were converted to LEDs,
the battery backup system would allow full operation of the traffic signals
during a power outage, thus alleviating traffic congestion.
Important feature is the battery backup system’s ability to maintain the
memory of the traffic signal controller. The controller is responsible for
sequencing the on and off times of the various signals. With a battery
backup system, the controller’s memory can be maintained and return to
normal operation once the outage has ended. This feature has eliminated the
time spent to reprogram controllers after a power outage
Traffic IQUPS It is designed to provide backup power for critical LED
traffic light intersections. With 1,000 watts of true sinewave power
available, IQFuel Cell and maintenance free Deep cycle batteries.
Traffic IQUPS will drive most large LED systems. Its pure sinewave output is
cleaner than utility power, making it ideal for all loads.
Total distortion is typically less than 1.5%. Manufactured in the USA to the
highest standards possible, Traffic IQUPS system is the best choice for
critical load protection. power outage knocked out traffic lights, backup
generators, emergency generator
Depending on the consumers needs, the IQFuelCell automatically charges the
battery with up to 100 Ah per day. As independent power supply or in
combination with other systems, the IQFuelCell runs self-sufficiently for
months.
The circuit is fully protected via breakers and fuses on the AC input,
connection to the batteries, and DC loads. Outdoor, lockable, aluminum
enclosure includes tamper-proof hardware suitable for pole or wall mounting.
DC ripple <50mV. |
LED
Explosion Proof use LED bulbs up to
12VDC, 24VDC, 120VAC 277VAC, 50 - 60 hertz
UL Listed for Standard 844
IQLED has been making Explosion proof Lighting systems
Construction Features Lamp compartment is factory sealed from wiring
chamber, eliminating on-the-job sealing. Inspection hole provides easily
accessible splice space. There is nothing to hold while splicing to
line. Set screw to stem keeps fixture from turning during relamping.
Three close-up plugs furnished with four hole junction box. Mounting
lugs are standard.
Lamp: LED 400+ Super Bright LED's
Housings: Heavy cast aluminum. Unit
withstands 1490 lbs. per square inch hydrostatic
pressure during UL testing
Wiring: Wiring is factory sealed.
Inspection hole provides easy access to splice
compartment
Globe: Impact and heat resistant clear
prismatic design affords excellent light control
Finish: Silver Gray Epoxy powder coat
Reflectors: Heavy gauge aluminum with highly
reflective white acrylic finish
Socket: Medium base glazed porcelain. Leads
pass through sealing compound that separates lamp
chamber from wiring compartment. Heavy gauge nickel
plated copper components. Spring loaded center
contact
|
|
Off-grid combined wind and diesel solutions for
island nations, farms, remote areas, cell
towers, exploration equipment, backup power &
water pumps for natural gas mines; rapid
deployment diesel & wind solutions (to include
airdrop) to disaster areas for power to
emergency and medical equipment, water pumps;
on-grid applications for farms, factories,
remote communities; and wind farm deployments.
Available in 3Q 2007/08
|
|
|
|
Traffic Enclosures and Cabinets |
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
|
|
