|
item# 86500
Compatible with
Dukane nurse call system with a central annuciator panel and overdoor lights.
Wireless nurse call
system
Emergency Reporting Systems add wireless to any
Hospital Signals Nurse Call Pull Cord Alert link
|
EMERGENCY REPORTING SYSTEMS
An easily installed receiver/interface for nurse station annunciators.
Emulates pull cord function via pendant wrist “panic
button” transmitter. Outputs activate annunciator windows, audible
alarms, room/corridor lights. Fail-safe operating mode.
 Now
you can add wireless emergency buttons to almost any nurse call system
with Linear's Pull Cord ALERTLINK
Reliable,
efficient emergency reporting systems for single or multiple users.
Features
- Interfaces to Most Nurse Call Systems.
- Adds Pendant Transmitter Capability.
- Emulates a Pull Cord Station.
- Fail-Safe Operating Mode.
- Trouble Contacts.
- Latching or Momentary Outputs.
- Accepts up to 32 DX Transmitters.
- All Linear DX transmitters are compatible with the
Pull Cord ALERT LINK receiver; however, Linear recommends use of the
ADDXT-21, ADDXT-61A, ADDXS-62, and the ADDXS-63.
- Compatible Modules
- Includes Power Supply.
|
Linear’s Pull Cord ALERTLINK adds pendant or wristband-style “panic
button” transmitter activation to most annunciator-based nurse call
systems.
This gives users freedom to move around, out of bed and away from the
pull cord, while retaining the ability to trigger a nurse call. Pull
Cord
ALERTLINK emulates a contact-type pull cord station used by many nurse
call systems. It includes outputs that can activate corridor lights,
room lights, annunciator lights, as well as audible alarms. While
designed for one to one usage, Pull Cord ALERTLINK can learn up to 32
Linear DX radio-based transmitters*.
Pull Cord ALERTLINK includes three indicator lights, as
well as a reset switch.The indicator lights
provide system status, including: POWER ON (green), SERVICE (yellow),
and ALERT (red).
The SERVICE indicator will illuminate whenever a transmitter sends a low
battery report to the receiver.The red ALERT indicator will light
whenever a transmitter is
activated.
The ALERT indicator will stay lit until the receiver mounted RESET
switch is activated for a minimum of three seconds.
The receiver has three inputs and five outputs.
The four alarm outputs latch upon activation of any recognized
transmitter and will remain latched until the RESET switch is activated
for a minimum of three seconds.
The unit can also be programmed Add wireless capability to any existing
nurse call station.
For momentary operation. In this configuration, the four alarm outputs
will transfer for a period of one second. Three of the outputs have a
common input and work in conjunction with each other while the fourth
output is completely isolated and is intended for system common
functions.
The relays operate in either the normal mode or a unique fail-safe mode.
In the normal mode, the relays operate only when a recognized
transmitter is activated. In the fail-safe mode, the relays operate both
upon activation of a recognized transmitter, as well as upon failure of
the Pull Cord ALERTLINK power source.
The fifth independent contact is used for low battery supervision of the
transmitters. Detection of a transmitter low battery will cause this
normally open contact to transfer its state.
Pull Cord ALERTLINK is powered from a supplied transformer.
It can be mounted directly to a wall or to a single-gang electrical box.
*When multiple devices are used, Pull Cord ALERTLINK cannot
identify the actual transmitter that was activated.
|
|
General Specifications
|
|
Operating Power: |
12 to 16 VAC or 12 to 16 VDC
(note that a 16 VAC transformer is supplied with the unit) |
|
Operating Current: |
up to 120 mA |
|
Indicators: |
POWER ON (green); SERVICE
(yellow); transmitter low battery; and ALERT (red)
transmitter alarm |
|
Radio Format: |
Linear DX |
|
Receiver Type: |
superheterodyne |
|
Operating Frequency: |
315 MHz |
|
Capacity: |
up to 32 transmitters |
|
Inputs: |
total of three - Alarm A, Alarm
B, Supervisory IN |
|
Outputs: |
total of five relay outputs
rated at 1 amp at 120 VAC - Alarm Output A1, Alarm Output
A2, Alarm Output A3, Alarm Output B, Supervisory OUT |
|
Wiring Connections: |
color-coded wire leads |
|
Overall Size: |
5.25 inches H x 3.625 inches W x
1.5 inches D (133 x 92 x 38 mm) |
|
Mounting: |
surface mount to wall or
single-gang box |
|
Recommended Transmitters: |
DXT-21; DXT-61A; DXS-62; DXS-63
(note: all Linear DX transmitters are compatible with the
Pull Cord ALERTLINK Receiver) |
|
|
Adobe
PDF Files Many OkSolar documents & catalog pages
 require
the latest version of Adobe Acrobat Reader that may
be downloaded free at: You can get this application
for Free at
http://www.oksolar.com/pdf
|
Signals for Use in Hospital and Care facilities
|
Now you can
add wireless emergency buttons to al most
any nurse call system with Pull Cord Alert link |
|
6536-G5
Horn / Strobe unit
High intensity strobe Neutral beige color The Edwards 6536-G5
Horn/Strobe is an audible/visual signaling device that may be used in
a variety of system configurations including call...MORE
|
 6537
Pull Cord Station
Double pole single throw switch Stainless steel face plate The Edwards
6537 pull cord station provides emergency call activation. The call
may be reset at the initiating...MORE
|
|
|
|
 6538-G5
Call for Assistance Kit
Meets ADA requirements
...MORE
|
 7005-G5
Hotel Room Annunciator Kit
High intensity strobe Neutral beige color Fits single gang box The
Edwards 7005-G5 Hotel Room Annunciator is for use in hotel rooms and
other areas designed to accommodate...MORE
|
|
Go to CHECK PRICES
> Hospital >
... |
|
7007B-N5
Buzzer / Strobe unit
High intensity strobe Neutral beige color The Edwards 7007B-N5
Buzzer/Strobe is an audible/visual signaling device that may be used
in a variety of system configurations including call...MORE
|
7008B-N5
Call For Assistance Kit
120V AC Double pole single throw switch High intensity strobe Neutral
beige color Fits single gang box The Edwards 7008B-N5 120 volt Call
For Assistance system is designed for areas...MORE
|
|
|
|
 7035
Nurse Call Annunciator
4 Bull's-eye lamps Provides both visual and audible signals Brushed
stainless steel finish The Edwards 7035 Nurse Call Annunciator
provides an unmistakable indication when a patient or resident...MORE
|
 7042
Series
Nurse Call Annunciator
12, 24, and 50 window sizes Provides both visual and audible signals
Gray enamel finish with hinged door The Edwards 7042 Nurse Call
Annunciator provides easy to read...MORE
|
|
|
|
 7302
Series
Bedside Station
3 maintained contacts Stainless steel face plate Model 7302AE has
"EMERGENCY" engraved on the plate The Edwards Bedside Station provides
emergency call activation. Calls are placed by pulling...MORE
|
 7603 &
7613 Series
Wall Station
7603 has three maintained contacts, one momentary contact 7613 has two
maintained contacts, one momentary contact Stainless steel face plate
Heavy duty pushbutton The Edwards 7603 & 7613 Wall...MORE
|
|
|
|
Signals for Use in Hospital and Care facilities
|
|
7615
Calling
Cord Security Clamp
...MORE |
7620
Pendant
Push Button
Locking, Momentary Contact
-
Locking push mechanism
-
Momentary contact
-
Tamper proof
...MORE
|
|
|
|
7633 Series
Corridor
Dome Stations
Audible and visual signals,
internal buzzer
...MORE
|
7641 Series
Corridor
Dome Stations
-
Available with 1, 2, 3, or 4 lamps
-
Stainless steel faceplate
-
White or Red dome
Options
|
|
|
|
7675- 7676- 7685 and
7686 Series
Calling
Cord Sets
-
Pendant locking buttons
-
Single cord sets (7675, 7685)
-
Double cord sets (7676, 7686)
-
6 ft. (1.83m) cords (7675, 7676)
-
15 ft. (4.58m) cords (7685, 7686)
-
Security clamp and plug
-
Momentary contact
...MORE
|
7930 & 7930L
Wall
Stations
...MORE
|
|
 Item#:
1ob003
Vaccine Refrigerator Solar Powered
Manufacturer: OkSolar
Solar Powered Vaccine Refrigerator - solar vaccine
refrigerator/icepack freezers |
Hospital
Access Control systems |
|
|
 Item#:
2518
IQUPS Hospital Power Backup Electrical
Manufacturer: IQUPS
Medical Grade UPS /Ruggedized IQUPS/IQfuel Cell 1400 watts 400 ah
More Info |
|
|
  
High Power Hospital LED Street Light: High
Power Led for Hospital applications Designed to eliminate glare, light trespass, and sky glow, the LED
street lights only shine light at ground level. Multiple colors
Temperature from 3000K to 7500K are available, suitable for different
area and situation. The Power varies from from small security yard, to
Major road. The lamp applies high power LED. Fine cooling system
applied. The average life time of the system can be high up to 50,000
hours, lighting 10-11 hours a day, the light can be used for more than 11
years. |
|
|
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
|
Traffic Enclosures and Cabinets |
|
|
|
Easy to retrofit LED streetlights can easily
retrofit existing metal halide,
high pressure sodium and mercury vapor luminaries.
Your next scheduled IQLED maintenance will be in 5 to
8
years
with our IQ Retrofit Lamps!
IQLED Unlike bulb streetlights,
IQLED lighting
modules produce very intense light in tightly
control IQLED directions. There is no longer a need for
reflectors or cut-off shields to minimize light
pollution and trespass. With IQLED energy usage less
than 20% and lifespan more than seven times that of
conventional streetlights, payback occurs very early
in a long life cycle. |
|
Weatherproof for coastal climates
Vibration resistant for tunnels and bridges
Withstand 160 MPH winds
Saving energy and money.
The new IQ LED lens fixtures use less energy,
helping to keep operating costs down. After
three years, you will regain the cost of
installing the new fixtures from energy and
maintenance savings.
Reducing greenhouse gas emissions. Using
less electricity reduces the emissions produced
by gas and coal-burning generators. When the IQ
LED Streetlights project is completed, carbon
dioxide emissions will be reduced.
Reducing glare to increase visibility.
Glare from street lights is significantly
reduced with the new IQ LED's street-light
fixtures, increasing visibility by directing
light onto the roadway and preventing it from
shining into the eyes of motorists.
Reduce excessive lighting and light
pollution. New ways of designing and
providing street lighting have been developed in
the last several years.
Maintaining a safe level of lighting. Street
lighting on residential and collector roads will
continue to meet minimum Illuminating
Engineering Society (IES) guidelines.
If your City is committed to
savings and reducing the level of light pollution
by using the most efficient IQ LED
street-light fixtures and employing the latest
design methods.
Contact us today!
|
|
 Use LED or incandescent bulbs up to
12VDC, 24VDC, 120VAC 240VAC,50 - 60 hertz
UL Listed for Standard 844
IQLED has been making Explosionproof Lighting systems
Construction Features Lamp compartment is factory sealed from wiring
chamber, eliminating on-the-job sealing. Inspection hole provides easily
accessible splice space. There is nothing to hold while splicing to
line. Set screw to stem keeps fixture from turning during relamping.
Three close-up plugs furnished with four hole junction box. Mounting
lugs are standard. |
|
1, Hospital , Hospital Signals, Signals for Use in Hospital and
Care facilities ,8
 Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
|
