When the enclosure reaches the predetermined set point, temperature contacts in
the thermostat are activated and the fan or heater automatically begins to
operate.
Series Thermostats, Circuit Nomally Colse,
Temperature Range 30 to 140 degrees F, Switching
Capacity Current: 15 Amps, Switching Capacity Voltage:
120 Volts, UL recognized
Series Thermostats, Circuit Nomally Open,
Temperature Range 30 to 140 degrees F, Switching
Capacity Current: 15 Amps, Switching Capacity Voltage:
120 Volts, UL recognized
Thermostats prolong the life expectancy of
heaters and fans by curtailing their operating hours
and also increase the working efficiency of electrical
components by exposing them to fewer contaminants from
the surrounding environment. Connections consist of
tubular screw terminals for AWG 14 (0.04 in2).
- Provision for both panel mounting and DIN rail mounting.
- Housing is plastic UL94-VO.
- Protection rating IEC IP30, UL and CSA Component Recognized.
-
These easy to install thermostats are designed to regulate and monitor air
temperature in switch-gear enclosures that are set up to operate with heaters,
fans, filter ventilators, heat exchangers, and/or signal transmitters.
Thermostat A-TEMNC is specifically designed for use with heaters (contacts close
on temperature drop), while thermostat A-TEMNO is designed to control fans,
filter ventilators, or for switching signal transmitters in the event of
overheating (contacts close on temperature rise). Both thermostats have a
bimetallic adjustable set point range of 30 to 140° F.An additional label is
provided to convert set point range to degrees Celsius.A preset label is also
provided to cover the set
point range label after the thermostat is put at desired temperature.
Temperature Control Switches (Thermostats)
See also -->>>
1, A Temperature control switchers, thermostat, desired
temperature, Temperature Control Switches,
Thermostats, Temperature control switchers,8
Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
