Outdoor Cabinet 10H X 20D OUTDOOR ENCLOSURES pole mountable outdoor enclosures

Outdoor Cabinet 10"H X 20"D X 21 7/8"W (19" Racking) Painted Cream

POLE MOUNTABLE OUTDOOR ENCLOSURES

We are leader specializing in a wide range of commercial, industrial, data and telecommunication technology applications, sets the standard of excellence for enclosures worldwide contact Us with your enclosures cabinets needs at Sales

outdoor waterproof enclosures, nema cabinets, electrical box, fan, cooling kits, equipment racks, outdoor shelter, heating, air conditioning, racking cabinets, industrial enclosures, networking racks, aluminum products

Outdoor Cabinet 10"H X 20"D

3" Rear Apron	Shields rear connections from the rain (RF & Power)
Pre-drilled access holes	3-cut out support: 2 - type N or UHF chassis mount connector's 1-7 pin weatherproof connector
Finish	Grey, textured, powder baked on paint
Rails	Two standard & alodine coated, on EIA 19"
Door	Front door secured with non-intrustion lock
Seals	Neoprene slotted gasket seals top cover Aluminum filled 13/16" gasket seals door

The OkPOD-1020 is a compact totally weatherproof (NEMA 4X) outdoor enclosure offers 20" of usable depth & accommodates up to 10.5 vertical inches of 19" rack space. Pre-drilled into the back wall and covered with a 3"x3" apron are three connector hole patterns (cut outs, 2 for RF & 1 for power). Each of the three connector cut outs comes with it's own removable access plate. The access plates may be left in place if not needed or they may be removed and an RF connector or a 7 pin power connector may be installed into their place. This design makes this unit very portable. Once you, install the three connectors, connect their associated wiring to your unit & rack mount your unit, you can close the door and lock it. From then on the RF and power will be accessible through the three connectors in the rear of the POD-1020. A small fan may be mounted up inside the 3"x3" apron if ventilation is needed. The POD-1020 can be wall, floor or pole mounted.

SPECIFICATIONS

GENERAL

Weight: 31 lbs. assembled

Door: one - secured with non-intrustion lock, two keys supplied Door Seal: 13/16" aluminum filled gasket

Material: .125 ALUMIFLEX / RF properties: nonferrous.
Finish: Grey, textured, powder baked on paint.
Top Cover Seal: Neoprene slotted gasket
Exterior Screws: Stainless with NEMA washers & nylon locking nuts

RACKING SPECIFICATIONS

Rails: Two standard (.125 Alumiflex, material)
Alodine coated
19" racking holes tapped to 10 x 32 threads

Note: Rails come pre-mounted, which allows your equipment's handles room to protrude out in front a distance up to 1 1/4 inches (if this is acceptable).

Or, if desired, rails can be mounted at any depth. (Customer drills four new mounting holes & mounts rails with the supplied extra screws & lock nuts)

Spacing: 19" EIA STANDARD

Useable Height: 10 1/2 inches

Useable Depth: 20 1/2" minimum / 21" maximum

DOOR OPENING CLEARANCE

Width : 21 7/8 inches

Height : 10 1/2 inches

EXTERIOR CABINET DIMENSIONS

Main Body:
Width: 22 1/4 inches
Height: 10 3/4 inches
Depth: 25 1/4"

Door:
Width: 23 1/8 inches
Height: 11 5/8 inches
Depth: 1 3/4 inches

Total Space Occupied:
Width: 23 2/8 inches
Height: 11 3/4 inches
Depth: 25 1/2 inches

INSIDE CLEARANCE - LESS RAILS

Width: 21 7/8 inches

Height: 10 1/2 inches

Depth: 22 1/4 inches

REAR POWER CONNECTOR HOLE

Hole size: One .858" diameter hole with two .142" mtg holes / spaced 1.22" apart
Description: Supports one male 7 pin power connector (Allied part # T-3106-000 (weatherproof - male) mates with female 7 pin power connector (Allied Part # T-648-000 (weatherproof - female))
Location : Under the rear apron, in the center of the rear panel

REAR RF CONNECTOR HOLES

Holes Size: Two .641 diameter holes each with four .125" mtg holes / spaced .718" sq.
Description: supports two chassis mount type N or UHF con.'s
Location : Both holes are located under the rear apron, one on the left side & one on right side of the rear panel

RATINGS
NEMA: CLASS: 250
TYPE: 4
Paint Tested: 500 Hour salt spray
500 hour immersion

OkSolar.com Affiliate

Solar Light Tower, Light Tower, Refugee Camps Solar Light Tower, mobile light towers, Job Site Solar Light Tower, Portable Solar Light Towers, Solar Powered Construction Light Tower,

Note: To view the above PDF documents, you will need the free Adobe Acrobat Reader

Batteries Enclosures for commercial, industrial, military applications, battery enclosures, battery cabinets, cabinets, battery cabinets, batteries enclosures, batteries cabinets, enclosures, Enclosures commercial, enclosures industrial, enclosures data and telecommunication technology applications !