|
|
Manufacturer and distributor of Airports, Runway Guard
Light, Computer control and monitoring, taxiway holding position line, airfield
or heliport, FAA
The Runway Guard Light is used to enhance
the visibility of taxiway holding positions. Two fixtures are installed on
opposite sides of the
taxiway holding position line.
IQ Airport Runway Taxiway and Obstruction lighting
Advanced Airport Equipment and Supply!
OEM Manufacturer and distributor of airport lighting
equipment Backup Power UPS, Audible, Visual, Text and Voice signals,
fire alarm and security products.
Contact Us Today!
 |
|
|
|
 Item# 11070
Heliport LED Elevated Light - Elevated Light
& LEAD-IN LIGHT
AC and DC voltage
powered elevated LED lights mark the perimeters of heliports and mark
the preferred direction of helicopter approach. They also outline the
runways and taxiways on VFR general aviation airports.
Voltages: 120VAC, 220-240VAC, 12VDC, 24VDC, 48VDC
Colors: Green, Red, Yellow, White, Blue
Item# 11079
L-861, L861E, L-861T
ELEVATED LIGHTS FAA L-861, L-861E & L-861T9
Tested
& Certified by Intertek Testing Service (ETL) per FAA AC 150/5345-46.
The FAA medium intensity elevated edge
lights mark the outlines of the runway (L-861), the taxiways (L-861T)
and the threshold (L-861E). The constant current 6.6-amp fixture
consists of a colored omni directional outer lens mounted on a yellow
powder coat painted cast aluminum lamp housing secured by an o-ring and
clamp band. |
|
Item# 11085 FAA L-862E
 ELEVATED LIGHTS FAA L-862E Tested & Certified by Intertek Testing Service (ETL)
per FAA AC 150/5345-46
The FAA L-862E high intensity elevated lights mark the runway
threshold & end of runway.
11085 - High
Intensity Runway Fixture, Threshold Fixture,
FAA L862E
|
|
Item# 11075
HELIPAD LIGHT COMBINATION PERIMETER & FLOODLIGHT Medium intensity 120 or 230 volts elevated helipad
perimeter light and a floodlight intended to "wash" the pad with light.
Combination of the IQ elevated edge light and a halogen floodlight.
 LED Heliport Light - Heliport Light Floodlight
The voltage powered elevated heliport floodlight includes an LED
heliport perimeter light of and a floodlight intended to "wash" the pad
with light. The heliport floodlight is a combination of the LED heliport
elevated edge light and a quartz halogen floodlight.
|
|
Item#
11077
 Rollover Light -
Heliport
Perimeter & Touchdown, Taxiway Edge
and Apron Edge. Rollover Light is
perfect for heliport and small airport applications where an inset light
is required. Only 8-inches in diameter yet has a wider light
source than other comparable lights. The thick tempered glass dome lens
will withstand high rollover loads.
PDF Information 11077
Heliport Perimeter & Touchdown, Taxiway Edge and
Apron Edge
LED Rollover Light
Rollover Light is perfect for heliport and small airport applications
where an inset light is required. The rollover LED light may be serviced
without removing the fixture from its mounting base is only
8-inches in diameter yet provides better visibility and circling
guidance than comparable lights with metal covers and incandescent
lamps.
|
|
Item# 11087
 MORSE BEACON HELIPORT & AIRFIELD IDENTIFICATION
Complies with ICAO Annex 14* for Identification Beacons white flashing
300mm International Morse Code beacon is specified for use on airfields
and heliports. meets the US Military Standard Salt
Fog Test conducted per MIL-STD-810E, Method 509.3, Procedure I. The
photoelectric controller option provides
automatic lighting activation at dusk per FAA specifications.
PDF Information 11087
Morse Beacon
|
|
 Elevated
Runway Guard Light a 24 hour flashing, unidirectional LED lamp
fixture combined with a remotely mounted solar engine. It is designed to
satisfy the structural and environment requirements of FAA Advisory
Circular 150– 5345 – 46B (L-804) and ICAO Annex 14 using solar power.
Item# 1119500 |
|
Item# 111451
Wind Cone L-806 L-807
 Wind Cone Tested
& Certified by Intertek Testing
Service (ETL) per FAA AC 150/5345-27C A wind cone is used to
visually indicate wind direction at airports and heliports.
more details.
PDF file |
|
Signs and Markers
Tubular Reflective Markers,
FAA L853
FAA L-853 markers may be used to delineate runways &
taxiways. Point Lighting supplies the product of an FAA certified
manufacturer (data upon request). “Retroreflective” means the material
reflects a significant amount of the light back in the direction of the
light source. The colored bands provide daytime marking and may also
function as snow markers. The markers consist of a 2.25-inch diameter
colored flexible polyethylene tube with bands of colored retro
reflective material. To meet FAA specifications, the marker must have
four bands on a tube at least 24-inches high. |
|
Center
Line
L852 LED Insert Centerline Fixture, FAA L852 PDF
Course-Hinds
Airfield Crouse-Hinds Cooper Crouse-Hinds Airport Lighting
Products - A Leading Manufacturer of Airfield Lighting Products
for FAA and ICAO Markets
|
|
Obstruction Lights and
Beacons |
|
Item# 11080
 FAA L-810
OBSTRUCTION
LIGHTS Tested & Certified FAA L- 810
 LED Obstruction Lights - Obstruction Lights
Red LED aviation obstruction lights presents the highest grade technical
features and the most options available in the industry. LED Obstruction lights
steady-burning obstruction lights are used to mark tall structures that present
hazards to air navigation.
|
|
FAA L-864
Flashing Red Beacon LED Flashing Beacon - Flashing Beacon
 Red flashing 300mm beacon is specified for use on stacks, towers and
other aviation obstructions. The flashing beacon has a clear acrylic
dome with red LED's. It is latched and hinged for servicing. Corrosion
resistance that meets the US Military Standard Salt Fog Test conducted
per MIL-STD-810E, Method 509.3, Procedure I.
Item# 11083
 FLASHING BEACON FAA L-864 Tested & Certified by Intertek Testing Service (ETL) per FAA AC
150/5345-43
The
Flashing red beacon,
flashing 300mm beacon is specified for use on stacks, towers and other
aviation obstructions.
Item# 11115
Obstruction |
|
Solar Powered LED
Obstruction Lights |
|
     
Solar
Powered Taxiway LED Lights
Create a runway in a hour or less, making it
ideal for use during emergencies or natural disasters.
solar-powered LED aviation light is a versatile and reliable
Portable Solar Airfield Lighting System. IQAirport ideal for
permanent, temporary and emergency applications.
Solar Powered Airport and Obstruction Lights
810L is a
stand-alone solar-operated FAA L-810 style obstruction light,
designed to mark tall structures that present hazards to air
navigation. This light, when installed in accordance with FAA AC
70/7460-1, warns pilots flying at night about structural
obstructions |
|
Airport and
Obstruction Lamps and Parts |
|
Airport Lamps, bulbs and parts
     
   
Your next schedule IQLED maintenance will be in 5 to
8
years!
with our IQ Retrofit Lamps
|
|
Item#: 2523
 IQUPS
Airfield Power Backup Electrical
Manufacturer: IQUPS
Airfield IQ USP Military grade/Ruggedized IQUPS/IQfuel Cell 1400 Watts
400 ah
More Info
|
|
-
Airport
Lighting Retrofit with LED
-
Airport Lamps
LED Retrofit
-
Heliport Lighting Specifications
-
Visual Signals
-
Visual Signals Airport
-
Visual
Signals Transportation
-
Visual
Signals Solar Powered
-
 Windsock
windsocks Orange 36 inches x 144 Inches and 18
inches x 96 Inches
-
 Windsock
Frames
|
Solar-Powered
Receive real-time Data Acquisition reports via SMS text message from
anywhere in the world. |
 PAPI
Precision Approach Path Indicator systems by IQAirport.com The
PAPI System provides the pilot a positive visual indication of the
aircraft’s position relative to the optimal glide slope during final
approach to the runway.
The L-880 PAPI system
consists of four units in a line or bar, each unit having two or
three 200 watt lamps. The PAPI unit produces a beam of light, the
upper portion being white, the lower red. As the pilot’s vertical
position changes, the color of the light asseen by the pilot changes
instantaneously. Precision Approach Path Indicator Compliances: FAA
AC 150/5345-28: L-880 and L-881 Transport Canada Specifications K342
ICAO Annex 14 Airfield Crouse-Hinds PAPI.pdf |
Airport Solar Lighting:
Airports
IQLED Solar Lighting meets the needs of commercial and
military airport flood lighting around the world. When compared to
traditional lighting, IQ
LED lighting systems are much more visible at night, consume
much less power, enhance safety and provide immediate savings in
power consumption and reduced maintenance costs.
Commercial Airports
Solar Lighting by IQLED lighting system provides pilots and
ground crews with an immediate visual recognition of objects at
airport facilities. IQLED Solar Lighting provides
passengers and airport personnel with superior security and
visibility in parking lots, arrival and departure areas of airport
entrances. IQLED Solar Lighting lights produce more
lumens per watt at significantly less wattage consumption when
compared to traditional lights, making them more energy efficient
when compared to conventional offerings.
Military Air Bases: IQLED Solar Ilumination
IQLED Solar Lighting lighting system provides
military bases with superior security and visibility. IQLED
Solar Lighting lights are manufactured to meet military
applications. No vulnerable cabling or wiring. Weather resistant
lights illuminate areas in even the most demanding environments when
24x7 uptime is a must.
Reducing greenhouse gas emissions. Using less electricity reduces
the emissions produced by gas and coal-burning generators. When the
IQLED Streetlights project is completed, carbon dioxide emissions
will be reduced.
Reducing glare to increase visibility. Glare from street lights is
significantly reduced with the new IQ LED's street-light fixtures,
increasing visibility by directing light onto the roadway and
preventing it from shining into the eyes of motorists.
Reduce excessive lighting and light pollution. New ways of designing
and providing street lighting have been developed in the last
several years.
Maintaining a safe level of lighting. Street lighting on residential
and collector roads will continue to meet minimum Illuminating
Engineering Society (IES) guidelines.
|
|
|
-
L-801 Airport Rotating Beacon: L-801 Rotating Beacons are
designed primarily for night operation as identification and
location markers for airports.
-
L-861T "MIEL" LED Taxiway Lights
-
E-982 High Intensity Elevated Approach Light
-
FAA L-860 "LIEL" Low Intensity Elevated Light
-
Heliport Perimeter Light with Flood
-
FAA L-862, L-862E, and L-861SE "HEIL" High Intensity
Elevated Light
-
FAA L-867 Light Base, Base Plates, Blank Covers, Spacers,
Extensions and Mounting Stakes
-
PAR56/PAR38 Elevated Approach Lights Type: 982H
-
Runway Guard Light FAA Type: L-804
-
Medium Intensity Taxiway Light MI Series FAA Type: L-861T
-
Medium Intensity Elevated Light MS Series FAA Compliant:
L-861 (Spare parts only)
-
High Intensity Runway Light HI Series FAA Compliant: L-862,
L-862E
-
FAA L-850A, B High Intensity Runway Centerline and TDZ Inset
Light
-
FAA L-850A, B, C, D and E High Intensity Runway and
Threshold/End Inset Light
-
FAA L-850C & D High Intensity Runway Edge, Threshold and End
Inset Light
-
FAA L852G and L852S Series High Intensity Inset Lights For
Guard Light and Stop Bar Applications
-
FAA L-852A, B, C and D Inset Medium Intensity Taxiway
Centerline Light
-
FAA L-852 Inset Medium Intensity Taxiway Centerline &
Stopbar Light
-
FAA L-852E, F and T Medium Intensity Taxiway Edge and
Intersection Light
-
Vehicle Undercarriage Security Inspection Light
-
Omnidirectional Semiflush Taxiway, Runway & Helipad Inset
Edge Light
-
Runway Centerline Light FAA Type: L-850A
-
Touchdown Zone Light FAA Type: L-850B
-
Runway Edge Light FAA Type: L-850C
-
Runway End Light FAA Type: L-850D
-
Runway Threshold Light FAA Type: L-850D
-
Runway Threshold/End Light FAA Type: L-850D
-
Approach Threshold Light FAA Type: L-850E
-
Land and Hold Short (LAHSO) Light FAA Type: L-850F
-
Taxiway Centerline Straight Section Light FAA Type: L-852A
and L-852C, H Series
-
Taxiway Centerline Curved Section Light FAA Type: L-852B and
L-852D, H Series
-
Taxiway Omni-Directional Light FAA Type: L-852E and T
-
Runway Guard Light FAA Type: L-852-G
-
Dual Runway Guard/Stop Bar Light FAA Type: L-852GS
-
Runway Stop Bar Light FAA Type: L-852S
-
FAA L-801A Rotating Airport Beacon Lights
-
FAA L-801 HBM 150/2 Airport Rotating Beacon
-
FAA L-802A Airport Rotating Beacon
-
FAA L-802A DCB 224 Airport Rotating Beacon
-
HBM 175/3 L-801H and L-802H Heliport Rotating Beacon
-
Medium Intensity Airport Rotation Beacon FAA Compliant:
L-801 and L-802 (Spare parts only)
-
FAA L-810 Obstruction Lights "POL"
-
FAA L-810 Obstruction Lights
-
FAA L-864 Flashing Beacon
-
FAA L-810 LED Obstruction Lights
-
Obstruction Lights FAA Type: L-810
-
KG114 Flashing Red Beacon FAA L-864
-
D164 SERIES LED BASED Medium Intensity Red Beacon FAA L-864
-
FlashGuard 2000B Medium Intensity Lighting System FAA L-865
-
FlashGuard 3000B Medium Intensity Dual Lighting System FAA
L-864/L-865
-
LC5000 Series Red Light Controller
-
StrobeGuard SG-60E High Intensity Strobe Lighting System FAA
L-856
-
FlashGuard Lightning/Surge Protection Devices LSPD 3000,
LSPD 3000B & LSPD 3003
|
Solar Powered Taxiway, Solar-Powered LED Aviation Lights,
solar-powered LED taxiway lights with optional deactivation switches |
|
L810 GENERAL uSE LED OBSTRUCTION LIGHT
ICAO Configurations
ICAO Red Lighting—Painted Tower/Red Lights for Night
ICAO White Lighting—White Lights for Day/White Lights for Night
ICAO Dual Lighting†—White Lights for Day/Red Lights for Night
|
Data Acquisition and Remote
Monitoring of Energy production and distribution
systems: PV Solar Powered, wind and fuel Cells
generators.
Data Acquisition Service
Data acquisition is the process of
gathering information in an automated
fashion from analog and digital
measurement sources such as sensors and
devices under test. Data acquisition
uses a combination of PC-based
measurement hardware and software to
provide a flexible, user-defined
measurement system.
|
|
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
|
Traffic Enclosures and Cabinets |
|
|
Solar Powered Crane Obstruction Warning Light.pdf
Solar-powered LED FAA Approved L-810 Aviation Obstruction Light,
solar operated FAA L-810 Obstruction LED Light, FAA L810 LED Airport
Lighting - LED Obstruction Lighting, Manufacturer of solar FAA
approved airfield lighting products.
More
Information on solar Powered Crane Obstruction Lights
Heliport
Lighting, Obstruction Lighting, Airfield Lighting,
FAA Windcone, Aviation Lights, Airport Taxiway
Lights, Perimeter Light, Wind Cone, FAA Certified
|
|
|
|
IQ Airport Runway Taxiway and Obstruction lighting
Advanced Airport Equipment and Supply!
OEM Manufacturer and distributor of airport lighting
equipment Backup Power UPS, Audible, Visual, Text and Voice signals,
fire alarm and security products.
Contact Us Today!
|
|
|
|
Item# 11070
Heliport LED Elevated Light - Elevated Light
& LEAD-IN LIGHT
AC and DC voltage
powered elevated LED lights mark the perimeters of heliports and mark
the preferred direction of helicopter approach. They also outline the
runways and taxiways on VFR general aviation airports.
Voltages: 120VAC, 220-240VAC, 12VDC, 24VDC, 48VDC
Colors: Green, Red, Yellow, White, Blue
Item# 11079
L-861, L861E, L-861T
ELEVATED LIGHTS FAA L-861, L-861E & L-861T9
Tested
& Certified by Intertek Testing Service (ETL) per FAA AC 150/5345-46.
The FAA medium intensity elevated edge
lights mark the outlines of the runway (L-861), the taxiways (L-861T)
and the threshold (L-861E). The constant current 6.6-amp fixture
consists of a colored omni directional outer lens mounted on a yellow
powder coat painted cast aluminum lamp housing secured by an o-ring and
clamp band. |
|
Item# 11085 FAA L-862E
ELEVATED LIGHTS FAA L-862E Tested & Certified by Intertek Testing Service (ETL)
per FAA AC 150/5345-46
The FAA L-862E high intensity elevated lights mark the runway
threshold & end of runway.
11085 - High
Intensity Runway Fixture, Threshold Fixture,
FAA L862E
|
|
Item# 11075
HELIPAD LIGHT COMBINATION PERIMETER & FLOODLIGHT Medium intensity 120 or 230 volts elevated helipad
perimeter light and a floodlight intended to "wash" the pad with light.
Combination of the IQ elevated edge light and a halogen floodlight.
LED Heliport Light - Heliport Light Floodlight
The voltage powered elevated heliport floodlight includes an LED
heliport perimeter light of and a floodlight intended to "wash" the pad
with light. The heliport floodlight is a combination of the LED heliport
elevated edge light and a quartz halogen floodlight.
|
|
Item#
11077
Rollover Light -
Heliport
Perimeter & Touchdown, Taxiway Edge
and Apron Edge. Rollover Light is
perfect for heliport and small airport applications where an inset light
is required. Only 8-inches in diameter yet has a wider light
source than other comparable lights. The thick tempered glass dome lens
will withstand high rollover loads.
PDF Information 11077
Heliport Perimeter & Touchdown, Taxiway Edge and
Apron Edge
LED Rollover Light
Rollover Light is perfect for heliport and small airport applications
where an inset light is required. The rollover LED light may be serviced
without removing the fixture from its mounting base is only
8-inches in diameter yet provides better visibility and circling
guidance than comparable lights with metal covers and incandescent
lamps.
|
|
Item# 11087
MORSE BEACON HELIPORT & AIRFIELD IDENTIFICATION
Complies with ICAO Annex 14* for Identification Beacons white flashing
300mm International Morse Code beacon is specified for use on airfields
and heliports. meets the US Military Standard Salt
Fog Test conducted per MIL-STD-810E, Method 509.3, Procedure I. The
photoelectric controller option provides
automatic lighting activation at dusk per FAA specifications.
PDF Information 11087
Morse Beacon
|
|
Elevated
Runway Guard Light a 24 hour flashing, unidirectional LED lamp
fixture combined with a remotely mounted solar engine. It is designed to
satisfy the structural and environment requirements of FAA Advisory
Circular 150– 5345 – 46B (L-804) and ICAO Annex 14 using solar power.
Item# 1119500 |
|
Item# 111451
Wind Cone L-806 L-807
Wind Cone Tested
& Certified by Intertek Testing
Service (ETL) per FAA AC 150/5345-27C A wind cone is used to
visually indicate wind direction at airports and heliports.
more details.
PDF file |
|
Signs and Markers
Tubular Reflective Markers,
FAA L853
FAA L-853 markers may be used to delineate runways &
taxiways. Point Lighting supplies the product of an FAA certified
manufacturer (data upon request). “Retroreflective” means the material
reflects a significant amount of the light back in the direction of the
light source. The colored bands provide daytime marking and may also
function as snow markers. The markers consist of a 2.25-inch diameter
colored flexible polyethylene tube with bands of colored retro
reflective material. To meet FAA specifications, the marker must have
four bands on a tube at least 24-inches high. |
|
Center
Line
L852 LED Insert Centerline Fixture, FAA L852 PDF
Course-Hinds
Airfield Crouse-Hinds Cooper Crouse-Hinds Airport Lighting
Products - A Leading Manufacturer of Airfield Lighting Products
for FAA and ICAO Markets
|
|
Obstruction Lights and
Beacons |
|
Item# 11080
FAA L-810
OBSTRUCTION
LIGHTS Tested & Certified FAA L-810
LED Obstruction Lights - Obstruction Lights
Red LED aviation obstruction lights presents the highest grade technical
features and the most options available in the industry. LED Obstruction lights
steady-burning obstruction lights are used to mark tall structures that present
hazards to air navigation.
|
|
FAA L-864
Flashing Red Beacon LED Flashing Beacon - Flashing Beacon
Red flashing 300mm beacon is specified for use on stacks, towers and
other aviation obstructions. The flashing beacon has a clear acrylic
dome with red LED's. It is latched and hinged for servicing. Corrosion
resistance that meets the US Military Standard Salt Fog Test conducted
per MIL-STD-810E, Method 509.3, Procedure I.
Item# 11083
FLASHING BEACON FAA L-864 Tested & Certified by Intertek Testing Service (ETL) per FAA AC
150/5345-43
The
Flashing red beacon,
flashing 300mm beacon is specified for use on stacks, towers and other
aviation obstructions.
Item# 11115
Obstruction |
|
Solar Powered LED
Obstruction Lights |
|
Solar
Powered Taxiway LED Lights
Create a runway in a hour or less, making it
ideal for use during emergencies or natural disasters.
solar-powered LED aviation light is a versatile and reliable
Portable Solar Airfield Lighting System. IQAirport ideal for
permanent, temporary and emergency applications.
Solar Powered Airport and Obstruction Lights
810L is a
stand-alone solar-operated FAA L-810 style obstruction light,
designed to mark tall structures that present hazards to air
navigation. This light, when installed in accordance with FAA AC
70/7460-1, warns pilots flying at night about structural
obstructions |
|
Airport and
Obstruction Lamps and Parts |
|
Airport Lamps, bulbs and parts
Your next schedule IQLED maintenance will be in 5 to
8
years!
with our IQ Retrofit Lamps
|
|
Item#: 2523
IQUPS
Airfield Power Backup Electrical
Manufacturer: IQUPS
Airfield IQ USP Military grade/Ruggedized IQUPS/IQfuel Cell 1400 Watts
400 ah
More Info
|
|
-
Airport
Lighting Retrofit with LED
-
Airport Lamps
LED Retrofit
-
Heliport Lighting Specifications
-
Visual Signals
-
Visual Signals Airport
-
Visual
Signals Transportation
-
Visual
Signals Solar Powered
-
Windsock
windsocks Orange 36 inches x 144 Inches and 18
inches x 96 Inches
-
Windsock
Frames
|
|
Solar-Powered
Receive real-time Data Acquisition reports via SMS text message from
anywhere in the world. |
|
PAPI
Precision Approach Path Indicator systems by IQAirport.com The
PAPI System provides the pilot a positive visual indication of the
aircraft’s position relative to the optimal glide slope during final
approach to the runway.
The L-880 PAPI system
consists of four units in a line or bar, each unit having two or
three 200 watt lamps. The PAPI unit produces a beam of light, the
upper portion being white, the lower red. As the pilot’s vertical
position changes, the color of the light asseen by the pilot changes
instantaneously. Precision Approach Path Indicator Compliances: FAA
AC 150/5345-28: L-880 and L-881 Transport Canada Specifications K342
ICAO Annex 14 Airfield Crouse-Hinds PAPI.pdf |
Airport Solar Lighting:
Airports
IQLED Solar Lighting meets the needs of commercial and
military airport flood lighting around the world. When compared to
traditional lighting, IQ
LED lighting systems are much more visible at night, consume
much less power, enhance safety and provide immediate savings in
power consumption and reduced maintenance costs.
Commercial Airports
Solar Lighting by IQLED lighting system provides pilots and
ground crews with an immediate visual recognition of objects at
airport facilities. IQLED Solar Lighting provides
passengers and airport personnel with superior security and
visibility in parking lots, arrival and departure areas of airport
entrances. IQLED Solar Lighting lights produce more
lumens per watt at significantly less wattage consumption when
compared to traditional lights, making them more energy efficient
when compared to conventional offerings.
Military Air Bases: IQLED Solar Ilumination
IQLED Solar Lighting lighting system provides
military bases with superior security and visibility. IQLED
Solar Lighting lights are manufactured to meet military
applications. No vulnerable cabling or wiring. Weather resistant
lights illuminate areas in even the most demanding environments when
24x7 uptime is a must.
Reducing greenhouse gas emissions. Using less electricity reduces
the emissions produced by gas and coal-burning generators. When the
IQLED Streetlights project is completed, carbon dioxide emissions
will be reduced.
Reducing glare to increase visibility. Glare from street lights is
significantly reduced with the new IQ LED's street-light fixtures,
increasing visibility by directing light onto the roadway and
preventing it from shining into the eyes of motorists.
Reduce excessive lighting and light pollution. New ways of designing
and providing street lighting have been developed in the last
several years.
Maintaining a safe level of lighting. Street lighting on residential
and collector roads will continue to meet minimum Illuminating
Engineering Society (IES) guidelines.
|
|
|
-
L-801 Airport Rotating Beacon: L-801 Rotating Beacons are
designed primarily for night operation as identification and
location markers for airports.
-
L-861T "MIEL" LED Taxiway Lights
-
E-982 High Intensity Elevated Approach Light
-
FAA L-860 "LIEL" Low Intensity Elevated Light
-
Heliport Perimeter Light with Flood
-
FAA L-862, L-862E, and L-861SE "HEIL" High Intensity
Elevated Light
-
FAA L-867 Light Base, Base Plates, Blank Covers, Spacers,
Extensions and Mounting Stakes
-
PAR56/PAR38 Elevated Approach Lights Type: 982H
-
Runway Guard Light FAA Type: L-804
-
Medium Intensity Taxiway Light MI Series FAA Type: L-861T
-
Medium Intensity Elevated Light MS Series FAA Compliant:
L-861 (Spare parts only)
-
High Intensity Runway Light HI Series FAA Compliant: L-862,
L-862E
-
FAA L-850A, B High Intensity Runway Centerline and TDZ Inset
Light
-
FAA L-850A, B, C, D and E High Intensity Runway and
Threshold/End Inset Light
-
FAA L-850C & D High Intensity Runway Edge, Threshold and End
Inset Light
-
FAA L852G and L852S Series High Intensity Inset Lights For
Guard Light and Stop Bar Applications
-
FAA L-852A, B, C and D Inset Medium Intensity Taxiway
Centerline Light
-
FAA L-852 Inset Medium Intensity Taxiway Centerline &
Stopbar Light
-
FAA L-852E, F and T Medium Intensity Taxiway Edge and
Intersection Light
-
Vehicle Undercarriage Security Inspection Light
-
Omnidirectional Semiflush Taxiway, Runway & Helipad Inset
Edge Light
-
Runway Centerline Light FAA Type: L-850A
-
Touchdown Zone Light FAA Type: L-850B
-
Runway Edge Light FAA Type: L-850C
-
Runway End Light FAA Type: L-850D
-
Runway Threshold Light FAA Type: L-850D
-
Runway Threshold/End Light FAA Type: L-850D
-
Approach Threshold Light FAA Type: L-850E
-
Land and Hold Short (LAHSO) Light FAA Type: L-850F
-
Taxiway Centerline Straight Section Light FAA Type: L-852A
and L-852C, H Series
-
Taxiway Centerline Curved Section Light FAA Type: L-852B and
L-852D, H Series
-
Taxiway Omni-Directional Light FAA Type: L-852E and T
-
Runway Guard Light FAA Type: L-852-G
-
Dual Runway Guard/Stop Bar Light FAA Type: L-852GS
-
Runway Stop Bar Light FAA Type: L-852S
-
FAA L-801A Rotating Airport Beacon Lights
-
FAA L-801 HBM 150/2 Airport Rotating Beacon
-
FAA L-802A Airport Rotating Beacon
-
FAA L-802A DCB 224 Airport Rotating Beacon
-
HBM 175/3 L-801H and L-802H Heliport Rotating Beacon
-
Medium Intensity Airport Rotation Beacon FAA Compliant:
L-801 and L-802 (Spare parts only)
-
FAA L-810 Obstruction Lights "POL"
-
FAA L-810 Obstruction Lights
-
FAA L-864 Flashing Beacon
-
FAA L-810 LED Obstruction Lights
-
Obstruction Lights FAA Type: L-810
-
KG114 Flashing Red Beacon FAA L-864
-
D164 SERIES LED BASED Medium Intensity Red Beacon FAA L-864
-
FlashGuard 2000B Medium Intensity Lighting System FAA L-865
-
FlashGuard 3000B Medium Intensity Dual Lighting System FAA
L-864/L-865
-
LC5000 Series Red Light Controller
-
StrobeGuard SG-60E High Intensity Strobe Lighting System FAA
L-856
-
FlashGuard Lightning/Surge Protection Devices LSPD 3000,
LSPD 3000B & LSPD 3003
|
Solar Powered Taxiway, Solar-Powered LED Aviation Lights,
solar-powered LED taxiway lights with optional deactivation switches |
|
L810 GENERAL uSE LED OBSTRUCTION LIGHT
ICAO Configurations
ICAO Red Lighting—Painted Tower/Red Lights for Night
ICAO White Lighting—White Lights for Day/White Lights for Night
ICAO Dual Lighting†—White Lights for Day/Red Lights for Night
|
Data Acquisition and Remote
Monitoring of Energy production and distribution
systems: PV Solar Powered, wind and fuel Cells
generators.
Data Acquisition Service
Data acquisition is the process of
gathering information in an automated
fashion from analog and digital
measurement sources such as sensors and
devices under test. Data acquisition
uses a combination of PC-based
measurement hardware and software to
provide a flexible, user-defined
measurement system.
|
|
Airport and
Heliport landing
back-up Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
| | | |
