Home

Technical LED's LED Color Chart

Click Here for Chromaticity Chart

 

Relative Intensity vs Wavelength (P) Forward Current vs  Forward Voltage Red 5,  Ultra Red 4,  HE Red 6,  Orange 7,  Bright Red 3,  HE Green 9,  Yellow 8 Relative Luminous Intensity vs  Forward Current Ultra Red 4,  HE Red 6,  Orange 7,  Yellow 8,  HE Green 9 Red 5,  Bright Red 3,  Pure Blue C Forward Current vs  Ambient Air Temperature Red 5, Ultra Red 4,   HE Red 6,  Orange 7,    HE Green 9,  Ultra Blue D, Yellow 8, Bright Red 3 Relative Luminous Intensity vs  Ambient Temperature Red 5,  Bright Red 3, Ultra Red 4,  HE Green 9,  Yellow 8 Maximum Tolerable Peak Current vs Pulse Duration Ultra Red,  Red,  HE Red, Orange,  Yellow,  HE Green, Ultra Green (523nm), Ultra Green (502nm),  Pure Blue,  Ultra Blue Bright Red

Backlighting Surfaces Using LEDs
 

Tables, Graphs and Images are through the courtesy of LEDtronics  07/10/00

Disclaimer: The information provide herein are basics to educate one on the operating properties and user characteristics of LEDs. We do not imply that the information is accurate or applicable to every aspect of LED usage. Each application will have to be performed on its own merits and with full understanding that damages and injury are the sole responsibility of the "builder". We do not dispense engineering advice. You need to determine the specific products you will need for your specific application.

The LED color chart does NOT represent what OkSolar provide. This chart is only to be used as reference for the various types of LED's being manufactured today, and to show what their basic properties are.

More Information on LED's ->>>

We provide OEM energy solutions for military and government, as well as private sector applications, helping clients achieve 100% up-time for applications ranging from Hospitals, school warning signals to explosion proof street lights. The SPDC/AC unit was designed to be easily expanded: power units can range from 2,000 Watts to 10,000 Watts. Its flexible platform design allows it to be easily customized for use with area lighting, remote communications, security systems, and surveillance equipment, to name a few applications. Charge power alone can be doubled or tripled with the addition of simple, cost-effective photovoltaic capture equipment. Pre-assembled & Factory Tested     OkSolar.com Affiliate   IP Video Anywhere Solar Powered! Protecting Critical Government Infrastructure Military and Homeland Surveillance IP Video AnyWhere Solar Powered! IP Video solutions are the next wave in CCTV surveillance. The ability to monitor your systems from anywhere, IP video solution. Keep an eye on your critical facilities at all times. With OkSolar’s IP Video Anywhere, you can monitor sites several thousand miles away as if they were across the street. Our system facilitates remote site surveillance through energy-independent operation and allows video to be transmitted over IP without any physical lines being installed. Companies with remote or hard to access assets, such as oil and gas pipelines, bridges or rural properties, have not had an effective, economical solution for protecting those assets. Some of the features like automated archiving allow you not only to track construction progress in real time but also to retrieve past images which can be used to resolve issues quickly. Traffic Warning Signals Our 12', 2 Head, Solar powered school warning flasher signal is the cost effective solution to your pedestrian safety problems. More Information > Traffic control lights, LED Traffic signals Manufacturer & Distributor, School Zone LED, School Zone LED flashing beacon, 24 7 hour led flashing beacon traffic, school zone, School warning signals, 24 hours warning Flashers, Road way warning signals, pedestrian crossing, railroad warning, ice on bridge warning, low water crossing, led beacons, speed awareness displays, Solar Powered Pedestrian Beacon, Pedestrian Beacons, 24/7 Flashing Beacon         SolarLighting Complete turn key Systems Solutions for Solar Lighting All components needed for installation are included (except for the mounting pole). The systems are designed for installation onto a wood, concrete, or metal mounting pole. You may choose to use your own pole or we can quote the poles separately from the lighting system itself. These units can be used for: Area lighting, Billboards lighting, Dock lights, Park lighting, Parking lot lighting, Parkway lighting, walkway lighting, Street lighting, Transit Lighting, Outdoor area lighting Complete turn key Systems Solutions for Solar LED Lighting     Solar Tree We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: -Shading vehicles from the sun and at the same time generate Green energy. -Facilitate the creation of infrastructure for electric vehicles. One Solar Tree structure system shades eight standard parking spaces. One Solar Tree structure generates enough energy to fully charge eight electric vehicles each day or power Office Space, Industrial plants or a House. We Ship Worldwide in site technical support available. Easy to retrofit LED streetlights can easily retrofit existing metal halide, high pressure sodium and mercury vapor luminaries.   Your next schedule IQLED maintenance will be in 5 to 8 years with our IQ Retrofit Lamps!   IQLED Unlike bulb streetlights, IQLED lighting modules produce very intense light in tightly control IQLED directions. There is no longer a need for reflectors or cut-off shields to minimize light pollution and trespass. With IQLED energy usage less than 20% and lifespan more than seven times that of conventional streetlights, payback occurs very early in a long life cycle. If you are committed to savings and reduce the level of light pollution by using the most efficient IQ LED street-light fixtures and employing the latest design methods. Fuel Cell Are you tired of your devices being left in the dark, when your solar energy system stops providing power? Then IQ Fuel Cells are the perfect answer for you. Are now available as an alternative source for renewable energy. Unlike traditional power generators, they don't require gasoline to generate power. They also provide an alternative to solar generators because they do not depend on any external power gathering equipment. These units are compact, durable, and built to power a wide range of applications. The Best Generator Ever! Applications: Airports, Computer Rooms, Hospitals, Traffic, UPS Smart designs with IQ Fuel Cells for smart energy applications Contact us today! >           Battery Backup Systems for LED Traffic Signs Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With IQUPS battery backup power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion. Important feature is the battery backup system’s ability to maintain the memory of the traffic signal controller. The controller is responsible for sequencing the on and off times of the various signals. With a battery backup system, the controller’s memory can be maintained and return to normal operation once the outage has ended. This feature has eliminated the time spent to reprogram controllers after a power outage Traffic IQUPS It is designed to provide backup power for critical LED traffic light intersections. With 1,000 watts of true sinewave power available, IQFuel Cell and maintenance free Deep cycle batteries. Traffic IQUPS will drive most large LED systems. Its pure sinewave output is cleaner than utility power, making it ideal for all loads. Total distortion is typically less than 1.5%. Manufactured in the USA to the highest standards possible, Traffic IQUPS system is the best choice for critical load protection. power outage knocked out traffic lights, backup generators, emergency generator Depending on the consumers needs, the IQFuelCell automatically charges the battery with up to 100 Ah per day. As independent power supply or in combination with other systems, the IQFuelCell runs self-sufficiently for months. The circuit is fully protected via breakers and fuses on the AC input, connection to the batteries, and DC loads. Outdoor, lockable, aluminum enclosure includes tamper-proof hardware suitable for pole or wall mounting. DC.         IQAirport Airport and Heliport landing back-up Battery Charger: 12Volts, 24 Volts, 36Volts, 48 Volts -120VAC or 230VAC Using state-of-the-art, switch-mode technology, the DLS Power Supply series is engineered with the user and variable environmental conditions in mind. Extra care has been given to insure many years of service-free operation, even when subjected to extremely harsh conditions. Batteries are charged quickly and efficiently without over charging and pumps, motors, and fans operate perfectly for prolonged life.         OkSolar.com has decided to adopt QR-Codes in our manufacturing process to streamline support and maintenance in all of our applications, resulting in savings for Government Agencies. OkSolar.com Serving The Industry Since 1988. All rights reserved. All trademarks or product names mentioned herein are the property and responsibility of their respective owners. Credit Pictures provided by PIX along with DOE/NREL Outdoor Solar Lighting, Solar LED Lighting, Outdoor Lighting, Solar lighting, Aviation and Obstruction Lighting, Marine Lanterns, Marine LED Lanterns, Marine Solar LED Lanterns, Solar LED Flashing Traffic Beacons, Solar LED Traffic Beacons, Solar Traffic Beacons  Infrared LED Red Beacon Solar FAA-Certified L-864 Infrared LED Red Beacon Solar Powered FAA-Certified L-864 Infrared LED Red Beacon.   -Steady or flashing red LED beacon is the perfect solution for wind turbines, towers cell, towers broadcast, buildings obstructions, crane obstructions lights. Meets FAA and ICAO standards. Available with IR option for night vision. Retrofits to replace incandescent light. Uses only low Watts. Infrared IR Obstruction light, Night Vision Goggles (NVGs) and Aviators Night Vision Imaging System (ANVIS) The Infrared (IR) option for lights overcomes this obstacle by combining visible red LEDs and IR LEDs in a single unit. OkSolar.com Affiliate Item # 103419 Explosionproof Enclosure explosionproof enclosure, explosion proof camera enclosure, explosion proof camera housing, explosion proof enclosure, explosion-proof enclosure Description of Explosion proof rated enclosure The EHX*E Series explosion proof camera enclosures are used in explosive and hazardous atmospheres throughout the world. They are designed to meet the rigorous requirements of explosion proof and dust ignition proof electrical equipment for installation and use in hazardous locations. These enclosures are also waterproof and dust tight. Features: Aluminum Construction Adjustable Mounting Cradle Available in 4-inch (10.16 cm), 6-inch (15.24 cm) and 8-inch (20.32 cm) Diameters For use in a Variety of Harsh and/or Hazardous Environments, including Marine Environments Meets NEMA 4X and IP66 Standards Use with Fixed Mount or Explosion Proof Pan/Tilt Benefits Explosion proof rated enclosure for standard fixed cameras. Ideal for explosive and hazardous atmospheres. Applications Oil rigs Oil & gas refineries Any other hazardous environments         501 - 502 Item# 102933 to 102940 For applications up to 1 nautical mile Benefits: Field-proven durability Over 250,000 installations worldwide Robust, compact and fully integrated design Easy, non-technical installation Maintenance-free operation Vandalism and theft resistant Resistant to the unrelenting pounding of the sea Features: Performance up to 1-nautical mile User programmable Seven IALA-standard flash patterns Compact, encapsulated design Suitable for low-intensity navigation or hazard-marking requirements   601 - 650 Item# 102943 to 102950 For applications up to 4 nautical miles Benefits: Unprecedented Reliability: microprocessor Energy Management System (EMS) monitors and adapts the light to environmental conditions for consistent operation and long life under the toughest conditions. Designed and tested to the toughest industrial standards: immersion, shock and vibration, corrosion, solar radiation, chemical resistance, hail and EMC/EMI/ESD. See spec sheet for test information. Intelligent settings: the first solar product to incorporate intelligent deployment location settings that allow the M650 to be tuned to its location, protecting it against improper configuration. Lantern automatically adjusts for Schmidt-Clausen. Self-contained and low maintenance: all components are incorporated within a compact, stand-alone unit for easy deployment and relocation. A replaceable battery pack extends service life beyond five years, reducing total cost of ownership and resulting in significant cost savings. Green solution: a clean, renewable and reliable energy source with the lightest environmental footprint. Recyclable batteries and RoHS compliant. Up to 44 candela IALA peak intensity and 4 nautical mile visibility Available in all IALA chromaticity colors Intelligent deployment location settings protect against improper configuration Intuitive on-board user interface, infrared remote and software programmability Replaceable and recyclable battery pack   Solar LED Aviation and Obstruction Light Acceptable for use in barricade & construction applications at Commercial Part 139 Airports under FAA Advisory Circular AC 150/5370-2E (Current Edition)   Beacon Lantern For applications up to 4 nautical miles Benefits: Unprecedented Reliability: microprocessor Energy Management System (EMS) monitors and adapts the light to environmental conditions for consistent operation and long life under the toughest conditions. Designed and tested to the toughest industrial standards: immersion, shock and vibration, corrosion, solar radiation, chemical resistance, hail and EMC/EMI/ESD. See spec sheet for test information. Intelligent settings: the first solar product to incorporate intelligent deployment location settings that allow the Beacon to be tuned to its location, protecting it against improper configuration. Lantern automatically adjusts for Schmidt-Clausen. Self-contained and low maintenance: all components are incorporated within a compact, stand-alone unit for easy deployment and relocation. A replaceable battery pack extends service life beyond five years, reducing total cost of ownership and resulting in significant cost savings. Green solution: a clean, renewable and reliable energy source with the lightest environmental footprint. Recyclable batteries and RoHS compliant. Features: Up to 44 candela IALA peak intensity and 4 nautical mile visibility Available in all IALA chromaticity colors Intelligent deployment location settings protect against improper configuration Intuitive on-board user interface, infrared remote and software programmability Replaceable and recyclable battery pack 701 Item # 102953 to 10295 103340 - 103343 For applications up to 4 nautical miles Benefits: Field-proven durability Over 250,000 installations worldwide Robust, compact and fully integrated design Easy, non-technical installation Maintenance-free operation Vandalism and theft resistant Resistant to the unrelenting pounding of the sea Features: Up to 46 candela IALA peak intensity and performance up to 4-nautical miles User programmable with 200+ flash patterns (including stady-on) Available in all IALA chromaticity colors - red, green, white and yellow Replaceable battery pack extends unit life beyond five years Suitable for navigation and hazard-marking in medium latitudes and areas with varying solar illumination Up to 155 candela IALA peak intensity and performance up to 5-nautical miles Items# 1029684 to 1029688 Applications: Fixed or floating visual aids to navigation Port and marina entrances, Channel and canal marking,Offshore oil & gas infrastructure Offshore wind/wave power Features: Up to 155 candela IALA peak intensity and performance up to 5-nautical miles User programmable with 250+ flash patterns (including steady-on) Available in all IALA chromaticity Suitable for navigation and hazard-marking in areas of varying solar illumination Item# Features: OKM708 Minimum peak intensity of 125 candela at the highest intensity setting, and performance up to 6-nautical miles. Each lantern can be set for three ranges: Low (minimum 25 candela peak intensity) Medium (minimum 60 candela peak intensity) High (minimum 125 candela peak intensity) Fully configurable with 250+ flash patterns (including steady-on) Optional GPS synchronization enables two or more lanterns to flash in unison Available in all IALA chromaticity colours - red, green, amber and white Integrated bird deterrent Visual colour indicator secured to top of reflector Suitable for high intensity navigation and hazard-marking applications SPECIFICATIONS OkSL15   Range (Nautical Miles): 1nm Colors: Red - White - Yellow - Blue - Green Body: U.V. stabilized polycarbonate Mounting: 4 x 4mm mounting holes Available Flash Characteristics: 16 factory-set as listed in download specifications Battery: 1.6AH NiMH Lenses: U.V. stabilized / optical grade polycarbonate Light Source: 4 ultra-high intensity LEDs Horizontal Output: 360 degrees Vertical Divergence: 9 degrees Current Draw (mA): minimal Autonomy: 30 days Lamp Life (hrs minimum): 100,000hrs Solar Cells: 0.43watt Height (Cm/Inches): 14.2/5.6 Width (Cm/Inches): 13.2/5.2 Weight (Kg/Lbs): 0.6/0.88 SPECIFICATIONS OkSL60   Range (Nautical Miles): 2+ nautical miles Colors: Red - White - Yellow - Blue - Green Body: U.V. stabilized polycarbonate Mounting: 4 * 4mm mounting holes Available Flash Characteristics: 256 IALA recommended / User adjustable Battery: 4AH NiMH Lenses: U.V. stabilized / optical grade polycarbonate Light Source: 6 ultra-high intensity LEDs Horizontal Output: 360 degrees Vertical Divergence: 9 degrees Current Draw (mA): 85mA Autonomy: 25 days Lamp Life (hrs minimum): 100,000hrs Solar Cells: 1.3 watt Height (Cm/Inches): 23.7/9.6 Width (Cm/Inches): 17.6/6.8 Weight (Kg/Lbs): 1/2.2 Unit Price (US $): 312.00 Shipping (US $): 20.00 Option Mounting plate           Solar LED Aviation and Obstruction Light Acceptable for use in barricade & construction applications at Commercial Part 139 Airports under FAA Advisory Circular AC 150/5370-2E (Current Edition)         SPECIFICATIONS OKSL-70   Range (Nautical Miles): 2 miles Colors: Red - White - Yellow - Blue - Green Body: U.V. stabilized polycarbonate Mounting: Industry standard mounting Available Flash Characteristics: 256 IALA recommended / User adjustable Battery: 4AH NiMH Lenses: U.V. stabilized / optical grade polycarbonate Light Source: 6 ultra-high intensity LEDs Horizontal Output: 360 degrees Vertical Divergence: 9 degrees Current Draw (mA): 85mA Autonomy: 25 days Lamp Life (hrs minimum): 100,000 Solar Cells: dual 1.8watts (each) Height (Cm/Inches): 22.4/8.8 Width (Cm/Inches): 23/9.1 Weight (Kg/Lbs): 1.1 / 2.3 Option Mounting plate   FAA Solar Powered Wind Turbine Obstruction Lighting robust, completely self-contained LED light designed for a range of emergency aviation applications including runway, threshold, approach, helipad and tactical airfield lighting. Fitted with RF radio control, this fully functioning light can be controlled from the tower with no costly cabling or trenching required. The unit is made from cast aluminum, subject to 7-stage powder-coating in aviation yellow. Four premium grade solar modules are integrated into the assembly and mounted to collect sunlight at all angles. The solar array charges the 24Ah battery during daylight hours, and at dusk the light will automatically begin operation. 16 independently controlled LED drivers within the light optic (patents pending) allow the IQAV425-RF fixture to operate as an omnidirectional or bi-directional assembly designed to meet the photometric requirements of FAA L861 runway edge and threshold when set to temporary high mode. The IQAV425-RF has non-precision IFR and VFR capability with both visible and near infrared lighting outputs. The airfield lights can be controlled anywhere in the airfield by handheld radio controller or in the air traffic control tower with virtually unlimited range using an encrypted repeating mesh network. The IQAV425-RF wireless RF light has a practically unlimited range through the use of the AvMesh™ communication network.The proprietary AvMesh™ network enables each light to transmit and receive commands, allowing the airfield to be expanded or altered at any time. AvMesh™ is self-realizing, meaning once deployed the airfield lights will undertake a period of network mapping, whereby the system automatically determines an efficient path to relay command messages through the airfield. This means that unlike competing products, the IQAV425-RF does not require direct line of sight to the handheld controller. The main requirement is that the distance between the controller and the closest light in the AvMesh™ network is no greater than 1.4km, and no two lights are more than 1.4km apart. AvMesh™has redundancy. Once the system has mapped an efficient relay of command messages, a secondary sub-network is mapped for added redundancy. The IQAV425-RF has three selectable modes; always on, dusk-till-dawn and standby. When set to dusk-till-dawn mode, integrated sensors in the light are able to detect when the ambient light threshold drops sufficiently and the light will begin operation automatically. Light intensities can be set to Low (10%), Medium (30%), High (100%). Lights are able to be assigned to a ‘light group’, and groups can be controlled independently using the wireless handheld controller. Sequenced approach can also be easily set up via the serial port and controller/PC interface. Tested to MIL-STD’s for environmental exposure including shock and vibration, extreme temperature and humidity, the unit is designed to offer years of maintenance-free service and operate in some of the world’s harshest environments. The IQAV425 is also available without RF radio control (AV425). To suit localised standards, the AV425-RF can be supplied with optic head designed to comply with either FAA L861 or ICAO Annex 14 photometrics. Compliance Designed to comply with photometrics for ICAO Annex 14 Volume 1, ‘Aerodrome Design and Operations’, Forth edition July 2004. Runway Edge - paragraph 5.3.9. Appropriate for use as threshold - paragraph 5.3.10, 5.3.11 threshold light or end light Approach - paragraph 5.3.4.1A & B, 5.3.4.8 simple approach lighting system Designed to comply with photometrics for FAA AC/150-5345-46D L861 (High Intensity Mode) Light Characteristics Light Source 16 ultra-high intensity LEDs Available Flash Colors Red Green White Yellow Amber Blue & sectored combinations. IR Maximum Available Intensity Steady-on: Red 25.0, Green 370.0, White 275.0, Yellow 92.5 Horizontal Output As per L861 and L861E Vertical Divergence As per L861 and L861E Available Flash Characteristics >250 including steady-on (user-adjustable) including Morse Code and RF sequenced & synchronised flashing Intensity Adjustments Low (10%), Medium (30%), High (100%) LED Life Expectancy >100,000 hours Electrical Characteristics Operating Voltage 12v Autonomy >170 hours (see downloadable PDF for details) Temperature Range -40 to 80°C RF Synchronisation Frequency 2.4Ghz ISM Band Range 1.4km between 2 lights, relayed Expandability Peer to peer networking Approvals FCC / CE Solar Characteristics Solar Module Type Multicrystalline Output 18watts Solar Module Efficiency 14% Charging Regulation Microprocessor controlled Power Supply Battery Type SLA (Sealed Lead Acid) Battery Capacity 24Ah Nominal Voltage 12v Physical Characteristics - Lights Body Material 7-stage powder coated aluminium Lens Material Lexan® Polycarbonate - UV stabilized Lens Diameter (mm/inches) 155 / 6.12 Lens Design 16 segment, multi-focus lens Mounting 4 hole bolt pattern on 200mm OD base Height (mm/inches) 495 / 19.5 Width (mm/inches) 233 / 9.17 Mass (Kg/lbs) 14 / 31.86 Certifications CE EN61000-6-3:1997. EN61000-6-1:1997 Quality Assurance ISO9001:2008 Waterproof IP68 LED Street Light, E40 Retrofit LED Street Light, Design to Replace the Traditional 75W E40 HPS Light Street Light Directly, No Need Change the Cobra Head Casing       Solar LED Lighting Complete turn key Systems Solutions for Solar Lighting All components needed for installation are included (except for the mounting pole). The systems are designed for installation onto a wood, concrete, or metal mounting pole. You may choose to use your own pole or we can quote the poles separately from the lighting system itself. These units can be used for: Area lighting, Billboards lighting, Dock lights, Park lighting, Parking lot lighting, Parkway lighting, walkway lighting, Street lighting, Transit Lighting, Outdoor area lighting Complete turn key Systems Solutions for Solar LED Lighting       TMPDC® Transportable Modular Solar Powered Storage - Solar Powered Transportable Offices 4-8-16KWh/Day 120VAC 60Hz or 230 VAC 50Hz. single or three faces. TMSPDC Transportable Modular (Trailer-Modular Power Storage - Offices) Characteristics: Transportable; Modular; Simple; Rugged; Military Grade. Systems Designed to survive harsh environments. Special Feature: these units are self-contained inside of a rugged shipping container. The unit remains a 'rugged shipping container' up until the point of deployment, at which time the solar array is exposed and the unit is ready to convert energy from the sun.. Our line of solar transportable power units (TSPDC) provides stand-alone photovoltaic power. These portable units supply AC power just about anywhere the sun shines. Our systems are fully assembled and factory tested for immediate use in the field. Emergency efforts are often hampered by the lack of electricity. Our TSPDC units are designed to fill the gap until power is restored. They can provide refrigeration for medical supplies, water filtration systems can be made operational, and communication equipment can be powered to help in the recovery process. Our units require only five minutes for one person to assemble: 1. Park the unit (see instruction on solar modules orientation) 2. Switch ON the power unit. 3. Switch ON the lift arms to get to the desired angle of orientation of the Solar Array.   OkSolar.com Serving The Industry Since 1988. All rights reserved. All trademarks or product names mentioned herein are the property and responsibility of their respective owners.