|
|
113FP-RGA-AQ Pipe Mount Stacklight - Flashing 24V, 113FP-RGA-N5 Pipe Mount
Stacklight - Flashing 120V AC, 113FS-RGA-AQ Surface Mount Stacklight - Flashing
24V AC/DC, 113FS-RGA-N5 Surface Mount Stacklight - Flashing 120V AC,
113SP-RGA-AQ Pipe Mount Stacklight - Steady 24V AC/DC, 113SP-RGA-N5 Pipe Mount
Stacklight - Steady 120V AC, 113SS-RGA-AQ Surface Mount Stacklight - Steady 24V
AC/DC, 113SS-RGA-N5 Surface Mount Stacklight - Steady
113 Series
Machlight
Machine Status Indicator
PLC Compatible
|
|
Surface Mount
 |
Pipe Mount
 |
Features
-
PLC Compatible
- 3 High Pre-Assembled Units
- Three lens colors: red, amber and green
- Two Mounting Configurations: Surface or Pipe
- Two Indication Options: Flashing or Steady
- 8 Inch (203 mm) Wire Leads
Agency Approvals:
Specification:
- 24V AC/DC Model
- 120V AC Model
Application/Installation:
The Edwards Machlight Status Indicators are Pre-Assembled three high
stacklights designed to be used for machine and process control
multi-status indication. Lens colors are arranged in the following top
to bottom order: red, amber, and green. The Machlight is available in
24V AC/DC and 120V AC. There are two basic mounting models: surface
and pipe mounting. The surface mount unit is supplied complete with
mounting hardware. The pipe mount version is supplied complete with a
10" (254 mm) mounting pole with the hardware necessary to pole mount
the light to a horizontal surface. The pipe mount version is also
supplied with a side mount bracket that can be used to fix the light
to the vertical side of a machine or control cabinet.
The Machlight utilizes a diffusion fresnel lens for increased viewing
area while maintaining a small, 2" (52 mm) lens diameter. Lenses can
be easily rearranged by removing the top retaining screw and simply
sliding the lens assemblies off of the stack.
Edwards Machlights are particularly effective in high noise areas
where ear protection must be worn and audible signals may not be heard
or understood. They can advise personnel in manufacturing and process
control areas when an operation is starting or stopping or to signal
an equipment malfunction.
|
|
Detailed Part Number Information: |
Part
Number
Description |
Ratings |
|
|
Item
Number |
113FP-RGA-AQ
Pipe Mount Stacklight - Flashing |
24V
AC/DC, 0.24A
5.76VA |
Red,
Green, Amber |
113FP-RGA-N5
Pipe Mount Stacklight - Flashing |
120V
AC, 0.062A
7.44VA |
Red,
Green, Amber |
113FS-RGA-AQ
Surface Mount Stacklight - Flashing |
24V
AC/DC, 0.24A
5.76VA |
Red,
Green, Amber |
113FS-RGA-N5
Surface Mount Stacklight - Flashing |
120V
AC, 0.062A
7.44VA |
Red,
Green, Amber |
113SP-RGA-AQ
Pipe Mount Stacklight - Steady |
24V
AC/DC, 0.24A
5.76VA |
Red,
Green, Amber |
113SP-RGA-N5
Pipe Mount Stacklight - Steady |
120V
AC, 0.062A
7.44VA |
Red,
Green, Amber |
113SS-RGA-AQ
Surface Mount Stacklight - Steady |
24V
AC/DC, 0.24A
5.76VA |
Red,
Green, Amber |
113SS-RGA-N5
Surface Mount Stacklight - Steady |
120V
AC, 0.062A
7.44VA |
Red,
Green, Amber |
|
Replacement Parts |
113LMP-10W
Replacement Lamp - 10W |
|
|
|
|
| |
Marine Marking
- Small safety/hazard buoys
- Recreational sporting and boating shore infrastructure
- Perimeter marking for fish and aquaculture farming facilities
- Marina walkways and dock ends
- Boat houses
- Private Docks
- Channels and canals
- Waterfront safety lighting
- Rock outcroppings near private docks
- Coastal signs (i.e. "Slow Down, Children Swimming")
- Swimming rafts (permanent and temporary)
- Floats for crab, shrimp, and prawn traps, etc.
- Cod and halibut Introduction lines
- Floats on oil spill barriers
- Floats for dredging lines
Railway Marking
- Blue 501 lights are used extensively to meet FRA regulations for hazard
marking on rail tracks
Other Marking Applications
- Emergency phone booths on university campuses
- Emergency phone booths along roadsides
- Barns on farms
- Temporary Hunting Camps
- Park and campground washrooms
- Bus stops
Applications:
|
|
