Manufacturer and distributor of Triliptical Stackable Status Indicator

102 Series Triliptical Stackable Status Indicator

Features
DeviceNet Compatible
PLC Compatible
Seven Interchangeable Light Source Modules -
- Steady-On Incandescent
- Steady-On Halogen
- Steady-On LED
- Flashing Incandescent
- Flashing Halogen
- Flashing LED
- 300,000 peak candela Strobe
Modules stackable in any combination or color
Interchangeable light sources
Base unit with optional horn
Vibration resistant heavy duty industrial design
Module rearrangement requires no rewiring
Molded-in gasketed lens modules
Mounting flange and 4", 10" and 15" mounting pipes

Specification:
Base Units
The Triliptical Stackable Status Indicator bases are available in three models. One model features a shorter base that is used when a lower profile is desired; the other model features a larger base designed for use with an optional tone module assembly.

Lens Modules
The diffusion optic lens allows viewing from close up while still projecting the light through use of a built-in projection ring. The lenses are available in five colors: red, amber, blue, green, and clear. Each light source module contains a removable cover to allow for easy relamping. The light module cover features a molded-in gasket for dust tight reliability.
Double optics and the triliptical design provides an increased viewing area without increasing the base diameter. The lens modules can be easily stacked together utilizing an internal retaining assembly. A maximum of five modules in any combination of color or type can be stacked on the base unit.

Visual Signals > Stackable Beacons

Tone Modules
Two tone modules are available. A single tone module and a tone selectable tone module - one tone selectable from eight available tones. Provides up to 85 dB at 5 feet.

Light Sources
Steady-On Long Life Halogen and Standard Incandescent Light
The Steady-On light module provides a constant visual signal. It is ideal for start/stop functions, on/off processes or continuous duty visual signaling applications. When installed with other multiple color modules and the tone module, the unit can be configured to visually and audibly communicate status changes.

Steady-On LED
The 100,000 hour Steady-on LED Module provides a constant visual signal. The module is available in four colors: red, amber, blue and green. It is ideal for start/stop functions, on/off processes or continuous duty visual status indicating applications.

Flashing Long Life Halogen and Standard Incandescent Light
The Flashing Incandescent Light commands immediate attention. It works well as a warning signal when used with the steady-on module. Applications include audible and visual signaling of equipment malfunction.

Flashing LED
The 100,000 hour Flashing LED Module also commands attention and works well as a status indicating signal. The module is available in four colors: red, amber, blue and green. Applications include audible and visual signaling of equipment malfunction.
Strobe
The strobe module is ideal for high ambient light areas. When used with the incandescent or LED light modules, it can be used to effectively signal urgent status changes. Up to five self-contained strobe modules can be installed anywhere in the stack.

DeviceNet Compatible Stackable Beacon Lighting System
The 102 Series Triliptical Stackable Status Indicator has been tested by ODVA's authorized independent test lab and found to comply with ODVA conformance test software.

The DeviceNet interface is in the Triliptical DeviceNet Base, 102TBS-DN. The base interfaces between the DeviceNet network and all installed stacklight modules.

The Triliptical DeviceNet Stackable Beacon is a slave device. It is a general purpose status indicator designed to indicate the status of a machine or process.

The unisolated physical layer contains DeviceNet required mis-wiring protection circuitry. A standard open style (unsealed) 5 pin connector is used to connect the Stackable Beacon to the DeviceNet bus. The current draw from the bus is 0.12A.

The Triliptical DeviceNet Stackable Beacon has LED, halogen, incandescent or strobe light sources which display the status of the machine or the process. The power required to drive the lamps is supplied separately from the bus power for the 120V AC (N5) version. DC power for the 24V DC (G1) version may be taken locally or from the DeviceNet Network. A standard open style 2 pin connector is used to connect 24V DC @ 1.6A or 120V AC at 0.6A to drive the 5 light sources.

The Triliptical DeviceNet Stackable Beacon contains a preprogrammed microcontroller which implements the Group 2 pre-defined Master/Slave Connection Set. This allows for one Explicit Messaging Connection and one Poll Connection. The Stackable Beacon resets automatically when DeviceNet power is applied.

Application/Installation:
Surface or 3/4" (19mm) NPT conduit pipe mounting in non-hazardous dust and weatherproof applications.
For indoor applications, may be vertically mounted with lenses facing up or down. For weatherproof installation, it is recommended that the unit be conduit mounted vertically with lenses facing up.
 

Sound file:

102/108 3pulse_horn Wav File - 214.6K

102/108 Beep Sound - 168.8K

102/108 continuous Wav File - 169.3K

102/108 fast_whoop Wav File - 200.9K

102/108 HI Low Sound - 181.6K

102/108 Rapid Siren Sound - 167.9K

102/108 stutter_beep Wav File - 195.4K

102/108 yeow Wav File - 175.8K
 

Ordering Information on PDF format, use these when requesting a quote: Click Here-->

Manufacturer and distributor of Triliptical Stackable Status Indicator, DeviceNet Compatible, PLC Compatible, Seven Interchangeable Light Source Modules, Steady-On Incandescent, Steady-On Halogen, Steady-On LED, Flashing Incandescent, Flashing Halogen, Flashing LED, peak candela Strobe, Modules stackable in any combination or color, Interchangeable light sources, Base unit with optional horn, Vibration resistant heavy duty industrial design, Module rearrangement requires no rewiring,