|
Manufacturer and Distributor of Innovative
Text
Text Display PLC Compatible
& Networked Industrial Signaling Products.
Message Center is designed for
installation in company lobbies to greet guests and provide them with
information at a glance. Such information may include meeting room assignments,
safety goals, changes in employee benefits or other company announcements. May
also be used in commercial establishments such as stores and restaurants to
assist with internal and external communications
MC1 Series
LED 1 Line Message Centers
Up to 51 Characters
Agency
Approvals:
- ETL Listed to ANSI/UL 1950 Second Edition (US)
- Can/CSA-22.2 No. 950-M89 (Canada)
- FCC Part 15 Class A
Features
- Stores up to 81 messages
- 100,000 Hr. multi-color LED lamp technology
- Five message speed settings
- 26 message operation modes
- Built-in animations
- 1 month typical memory retention
- Built-in real-time clock, 12 or 24 hour format
- Built-in serial computer interface-RS232 and
RS485
- Addressable
- Password protected
- Power cord with 3 prong plug
- Continuous message entry with automatic
centering in any mode
Application/Installation:
The
Edwards MC1 Series of Message Centers are indoor rated
multi-color LED communication centers. They may be used
as a single stand-alone message center or can be
networked into a plant wide communication system. When
networked, one message can be transmitted from the
controlling computer software to the serial computer
interface on all the message centers within the facility
or discrete messages can be sent to specific addresses
within the communication network of messages centers.
The units may be wall or ceiling mounted using the
supplied hardware. Designed for indoor communication in
commercial and industrial environments, Edwards Message
Centers can display production goals and performance,
safety goals and performance, changes in employee
benefits, company announcements and achievements as well
as boost morale through employee recognition. May be
used in commercial establishments from stores to
restaurants to assist with internal and external
communications.
Hand Held Remote Programmer
A 54 key hand held remote control keyboard with easy to
understand programming instructions is supplied with
each Edwards Message Center. MC-RP (supplied with each
unit). Batteries included.
Accessories
Infrared message loader with 3 foot cable and 9V battery
— MC-RIRL. Wall or ceiling mount bracket — MC4-CWMK
For Message Center Software & Hardware Accessories
please refer to the catalog pages on the left-hand side
of this page.
|
|
|
|
Detailed
Part Number Information: |
Part Number
Description |
Ratings |
|
|
Item Number |
MC1-14C4
4 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MC1-15C2
2 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MC1-15R2
2 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MC1-20C2
2 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MC1-20C3
3 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MC1-30C3
3 Inch LED Letter Single Line Message Center |
120VAC 60Hz
|
|
MCPROTOCOL
Edwards Message Center Protocol |
|
|
MC-RIRL
Remote Infrared Hand Held 3 Message Loader |
|
|
MC-RP
Infrared Remote |
|
|
|
Accessories |
MCN23225FRJ11
RS232 Serial Port Female 25 Pin to RJ11 |
|
|
MCN232-6PRJ11
RS232 6 Position Coupler |
|
|
MCN2329F-25M
RS232 Serial Port Female 9 Pin to Male 25 Pin |
|
|
MCN2329FRJ11
RS232 Serial Port Female 9 Pin to RJ11 |
|
|
MCN232-RJ11-25
RS232 25 Foot Cable With 2 RJ11s |
|
|
MCN232-RJ11-50
RS232 50 Foot Cable With 2 RJ11s |
|
|
MCN485-100
RS485 100 Foot Cable |
|
|
MCN485-1000
RS485 1000 Foot Cable |
|
|
MCN485BB-8
RS485 8 Foot Cable |
|
|
MCN485CB2323A9
10 Foot PC to Converter Box, RS232 Cable, 9 Pin (PC-Female,
Converter Male) |
|
|
MCN485CB2EOLT
Converter Box With 2 EOL Terminators |
|
|
MCN485CBAC
AC Adapter for Converter Box (10W, 120V Input, 9V Output) |
|
|
MCN485EOLTCB
End-Of-Line Terminator |
|
|
MCN485MODCB
10 Foot Modem To Converter Box RS232 Cable, 9 Pin (Modem
Male) to 25 Pin (Converter Male) |
|
|
MCN485NRB
Network Repeater Box |
|
|
MCN485-RJ11-1
1 Foot RS485 Cable With 2 RJ11s and Ferrite For Network
Drops |
|
|
MCN485-RJ11-8
8 Foot RS485 Cable With 2 RJ11s and Ferrite For Network
Drops |
|
|
|
|
LED Lighting sources are ideally suited
for applications where lighting requirements are principally dictated
by the need to be seen. (Traffic signals, navigational beacons,
obstruction lighting, signage, runway
lighting, brake lights...)
Innovative traffic design and signaling, designed as per your
Specs. for their lighting needs. Amber alert, Futuristic i intersection control,
"Emergency Vehicle Approaching", signs have been designed and
delivered.
The sign you are reading is a 5 foot by 11 foot.
1.0 General Display Characteristics
The unit shall display a legend in accordance with the requirements
in the federal Standard Highway Signs Book. The message shall be
bright in color against an f l a t black background. The color of
the illuminated message is a function of the
Specified LED. The display shall consist of an array of LEDs
Which f o r m the legend. The sign shall be discernible attracting
Attention under any lighting conditions varying from t o t an l
 darkness to bright s u n light. The message shall be clearly legible
at a minimum of 300 ft (91 meters). When n o t energized, the sign
Shall be blanked out (unreadable) with no phantom images,
Regardless of solar intensity or direction. The sign shall have a
Limited viewing a n g l e of 30' centered about the optical axis and
Perpendicular to the surface of t h e matrix display. The unit
Shall be capable of continuous operation over a temperature range
Of -35'F to +130’F? (-37C to +74C) -
2.0 LED Module
The LEDs shall be mounted into one and one-half inch pixels and
Arranged on t h e front aluminum faceplate to display the requested
Message. The LED pixel unit shall be completely self contained
and removable from the door.
3.0 Housing
The housing and door assembly shall be black powder coated
Aluminum with an overall material thickness of 0.125 inches
(0.3cm). All seams shall be continuously welded, an internal
Stiffening rib of 0.125 inch (0.3m) aluminum shall be welded to
The housing f o r additional strength and rigidity. Aluminum
Piano hinge and 8 latches will be provided to hold the door shut.
A gasket will be used to seal the door of the housing. All nuts,
Bolts, screws, washers, lock washers, and other fastening
Materials shall be stainless steel.
4.0 Electrical Requirements
The normal failure of one LED shall not deactivate any o t h e r
LED.
Two power supplies shall operate the light sources. The nominal
Input voltage shall be 120 volts AC. Connections for primary
Wiring shall be made via a barrier terminal strip. All wiring
Shall be #16 gauge wires.
5.0 Illumination System Requirements
The sign shall be illuminated by super bright LEDs. Each LED
Shall be rated for 100,000 hours of continuous operation with a
Luminous intensity of 1200 (typically) mcd at 20ma. In a standard
LED sign, the LEDs shall have the following characteristics:
Size T-1 3/4
Peak Wave Length 630 nm
Brightness 1400 (typically) mcd
6.0 Optional Dimmer
There shall be available, as an option, a photocell and dimming
Circuit, shielded from any direct light source, which are capable
Of automatically adjusting the message light output in response
To changes in ambient light conditions. The photoelectric cell
Shall operate automatically to brighten the intensity of the sign
Illumination to one-half of t h e daylight illumination as
Nighttime occurs. Pixels shall be wired t o utilize h a l f the U D
s
In dim mode during one 24 hour cycle and alternately the second
Half of the pixel in the second 24 hour cycle to evenly balance
The use of all LEDs.
7. 0 Dimensions
Units designed for traffic control applications are dimensioned
In accordance with the Manual on Uniform Traffic Control Devices.
i.e. 24 inch (6lcm) x 24 inch, 24 inch x 30 inch (76cm), 30 inch
x 30 inch, etc. Units designed for other applications can be
Specially dimensioned at extra cost. All housings are 6 inches
Deep.
8.0 Warranty
OkSolar.com*s LED Blackout signs are warranted against defects
In materials and workmanship for a period of three (3) years from
Original shipment date.
Manufacturer and Distributor of,
Amber Alert, Innovative traffic design and signaling,
Traffic signals, navigational beacons, obstruction
lighting, signage, runway lighting, brake lights,
Emergency Vehicle Approaching, signs have been
designed and delivered.,
|
