Intelligent module design
The SM110/SM100 single crystalline solar module is available in a framed and a laminate
version. Both modules feature a rugged laminate design and PowerMax®
solar cells to provide maximum energy production throughout the day. The module has a
rated output of 110 WP/100 WP
and is available in a 12 volt and as the SM110-24/SM100-24 in a 24 volt version. The
efficient design of the SM110/SM100 module, with its large surface area, is ideally suited
for medium and high output applications.
The module is designed for easy interconnection to achieve voltage and current configurations for grid-connected systems as well as stand-alone systems.
The high output of the SM110/SM100 reduces the number of modules required to acheive a desired power output. This means:
Well suited for most solar appliations, the modules are able to withstand some of the harshest environments in the world and continue to perform efficiently.
 |
 |
 |
 |
| Electrical Parameters1 | SM110 | SM100 | ||||
| 12V | 24V | 12V | 24V | |||
| Maximum power rating | Pmax | [Watts] | 110 | 100 | ||
| Minimum power rating | Pmin | [Watts] | 100 | 90 | ||
| Rated current | Imp | [Amps] | 6.3 | 3.15 | 5.9 | 2.95 |
| Rated voltage | Vmp | [Volts] | 17.5 | 35.0 | 17.0 | 34.0 |
| Short circuit current | Isc | [Amps] | 6.9 | 3.45 | 6.5 | 3.25 |
| Open circuit voltage | Voc | [Volts] | 21.7 | 43.5 | 21.0 | 42.0 |
| Thermal Parameters | ||||||
| Nominal operating cell temperature2 | [°C] | 45 +-2 | ||||
Change of Isc with temperature,
 |
+1.2mA/°C (+0.04%/°K) | |||||
Change of Voc with temperature,
 |
-0.0775 Volts/°C (-0.34%/°K) | |||||
| Qualification Test Parameters3 | ||||||
| Temperature cycling range | [°C] | -40 to +85 | ||||
| Humidity, freeze, damp heat condition | [% RH] | 85 | ||||
| Maximum system voltage | [Volts] | 1000 per ISPRA (EC), 600 per UL 1703 |
||||
| Wind loading or surface pressure | [N/m²] (PSF) | 2400 (50) | ||||
| Maximum distortion4 | [degrees] | 1.2 | ||||
| Hailstone impact withstand (diameter @ velocity) |
[mm @ m/s] (in @ MPH) |
25 @ 23 (1.0 @ 52) |
||||
| Physical Parameters | ||||||
| Number of series cells | 72 | |||||
| Length | [mm] (in) | 1316 (51.8) | ||||
| Width | [mm] (in) | 660 (25.98) | ||||
| Depth (w/o box) | [mm] (in) | 40 (1.6) | ||||
| Weight | [kg] (lbs) | 11.5 (25.1) | ||||
| Warranty5 | ||||||
| Power >= 90% of minimum power | [Years] | 10 | ||||
| Power >= 80% of minimum power | [Years] | 25 | ||||
| 1 | Determined under standard test conditions (STC): Irradiance = 1000w/m² cell temperature = 25 °C; solar spectral irradiance per ASTM E892 (Air Mass = 1.5). |
| 2 | Determined under nominal operating conditions (NOC): Irradiance = 800 w/m² ambient temperature = 20 °C; wind speed = 1m/s. |
| 3 | Qualification Tests performed as per CEC 503 Test Specification, to ensure durability and performance in outdoor conditions. |
| 4 | Diagonal lifting of module corner with three corners fixed. |
| 5 | To original consumer purchaser. See full Limited Warranty for all conditions. |
|
Serving The Industry Since 1988.