101 Series AdaptaLight Stackable Beacon PLC Compatible
New Page 2
UL 1638 Listed
- CSA Certified C22.2 No. 205
- PLC compatible
- Seven gasketed modules:
- Steady-on incandescent
- Flashing incandescent
- Steady-on halogen
- Flashing halogen
- Steady-on LED
- Flashing LED
- Strobe module
- Stackable in any combination or color
- Base unit comes with 85 dB pulsating horn
- Vibration resistant heavy duty industrial design
- Module rearrangement requires no wiring; screw terminals in base
for field wiring
- 300,000 peak candlepower strobe
- Electrical interconnection between units is through solid copper
Strobe models available in 120V AC; 12V & 24V DC; incandescent models
available in 12V DC; Halogen models available in 120V AC & 24V DC;
models with LED cluster available in 24V DC & 120V AC
Base unit comes with 85 dB pulsating horn
Vibration resistant heavy duty industrial design
Module rearrangement requires no wiring
300,000 peak candela strobe
The Edwards AdaptaLight Stackable Beacon is a unique audible-visual
signaling device which can contain up to 5 light modules and a pulsating
horn in a single “stack.” It is for heavy duty use in locations where
visibility over longer distances is required. All modules are gasketed.
The base of the AdaptaLight Stackable Beacon contains a pulsating horn
rated at 85dB at 10 feet. The horn can be operated as a sixth
independent signal or in conjunction with any one of the light modules.
The steady-on modules provide a constant visual signal. They are ideal
for start/stop functions, on/off process or continuous duty visual
The flashing modules command immediate attention. They work well as a
warning signal when used with the steady-on module. Applications include
signaling of equipment malfunction.
The strobe modules are ideal for high ambient light areas. It can
effectively signal urgent status changes when used in conjunction with
the incandescent or LED light modules. The LED modules are best for
applications where long life (120,000 hours) is a requirement.
The AdaptaLight can be surface or 1/2" (13mm) NPT conduit pipe mounted
in non-hazardous dust and weatherproof applications. For indoor
applications, it may be vertically mounted with lenses facing either up
or down. For weatherproof installation, the unit must be mounted
vertically with lenses facing up. May also be corner mounted using the
Cat. No. CBR, corner mount bracket, or wall mounted, using the Cat. No.
WBR, wall mount bracket. See AdaptaBeacon Accessories
Dimensions and Weight
Length: N/A in.
Width: N/A in.
Height: N/A in.
Shipping Weight: 5 lbs.