Billboards Lighting Controllers
OkSolar's Billboards Division the world's leading solar controller for both
professional and consumer applications:
IQ Solar LED Street Lighting
Self Contained
Easy Automatic
dusk-to-dawn operation.
Eco Friendly
No electricity required!
***Withstand 160 MPH winds special order
Your next scheduled
maintenance will be in 5 to 7 years!
Complete turn key Systems Solutions
for Solar LED Lighting
-Made in USA OkSolar.com products proudly meet the Buy American Act.
-Illumination Engineering Society (IES)
OkSolar.com lighting products follow guidelines set out by the IES, the recognized technical authority on illumination.
-International Dark-Sky Association (IDA)
OkSolar.com product lines offer dark-sky friendly fixtures, helping to preserve and protect the nighttime environment through responsible outdoor lighting.
U.S. Green Building Council (USGBC)
OkSolar.com is a proud member of the USGBC, an organization dedicated to sustainable building design and construction as well as the developers of the LEED building rating system.
All components needed for installation are
included (except for the mounting pole optional). The systems are designed for
installation onto a wood, concrete, or metal mounting pole. You may choose to
use your own pole or we can quote the poles separately from the lighting system
itself.
These units can be used for: Area lighting, School security,
Billboards lighting, Dock lights, Park lighting, Parking lot lighting, Parkway
lighting, walkway lighting, Street lighting, Transit Lighting, Outdoor area
lighting, Security Lighting
-Complete turn key Systems Solutions for
Solar LED Lighting
-Hurricane Proof LED Solar Lighting - Seismic Restraint
Solar LED
Benefits:
- Esay installation
- No Wiring required. Installing and moving is easy
- No more waiting for the utility company!
- Proven technology.
- Vandal and theft-resistant components and hardware.
- All parts are corrosion resistant.
- Low installation cost.
- Easily and quickly deployed in almost any location.
- NO wiring run from the grid
- NO cuts through existing roads, sidewalks or landscaping.
- NO Maintenance
- NO Utility bill
- Maintenance Free Batteries!
- Big Credits and Savings form State and Federal Taxes.
- Component lifetime of 25 years
- Two-year full system warranty
SYSTEM OPERATION: The system converts the suns energy into electricity and stores it to provide up to twelve hours of light plus three days worth of backup energy.
Activation Switch On/Off: A microprocessor automates the functions of the system automatically activates form sunset to sunrise; has a timer, regulating the hours the light stays on; also regulates the battery, preventing overcharging and protecting against discharging. optional wireless on/off
Fixture Dimension: H 8 Meter approx.
Solar Cell type: Mono or Polycrystalline
Battery Type: Gel Deep Cycle, Valve-Regulated, Gelled-Electrolyte heavy duty Battery.
Reserve: 3 Days under Cloudy conditions
Light Source Type: IQLED High Power LED.
Operating time while fully charged: 8-10 hours per day x 2-5 continuous rainy days Daily For extended run times use we suggest adding Item# 160799
Extend your operating time: dusk to down (14-17 hours) you may have to add plug-in depending on your zone. Item# 160799
Daily Radiation Zone: Designed for Zone with 4-5 Hours of daily Insulation.
Temperature of work environment: Optimal Ambient -20 to +25 C (-4 to 77 F)
Maximum Ambient Temperature -40 to +80 C (-40 to 176 F)
fluorescent fixtures in areas that experience temperatures of 5 F (-15C) or below is not recommended. USE LED fixtures
Installation recommendation: 85 Feet (25 Meter) distance for each Lamp
System includes:
-Fixtures
-Solar Panel.
-Structure for solar panel Pole mount Adjustable 0-90 horizontal and 360 about pole.
-Entire pole-mounted system is designed to withstand 90 MPH wind loads with 1.3 gust factor.
-Microprocessor controlled Charge controller and Timer.
-Batteries: Long-Life - Deep-Cycle - Maintenance-Free.
-Detailed instruction manuals included in every system.
-Packaging information: Pallet - Brown Box (Individual Packing for each part)
-Virtually Maintenance-Free Design.
-Vandal and Theft Resistant Components and Hardware.
-Expand your system: We have included components that allow for easy plug and play expansion units.
-Pole Not Included sold separately Pole - Space and Optics
-Arm Not Included sold separatly
-(Optional) Unbreakable Solar Modules
-(Optional) Wireless Remote Control Activation.
V7.77
OkSolar.com Affiliate
Sample Ready to ship unit
Unique Lighting Control Features
- Using solar array voltage to determine day and night, the SunLight
provides 10 different lighting control options.
- By measuring the length of the night, the SunLight's ON/OFF/ON options
provide the capability to turn on the light at sunset, turn off the light
after 3 to 6 hours, and then turn on the light again for 1 or 2 hours before
sunrise.
- The length of the night is calculated by taking a moving 4 night
average, and thus automatically adjusts for seasonal changes in the length
of the night.
- The test button helps the installer by blinking the red LED to confirm
correct selection of lighting control option, and also turns on the light
for 5 minutes to verify that the light is operating correctly.
- Timer accuracy is within 2 seconds.
Timers: lighting control based on Timer/Clock.
DTMR1
-
Multi-Function Timer
•
C12-24VDC operation.
•
Timing range (1 sec. to 60 mins.).
 •
Contacts are rated 8 amp @ 120VAC/28VDC.
•
Relay activates at the beginning or end of timing cycle.
•
Relay pulse at the end of timing cycle.
•
DIN Rail mountable.
•
Lifetime Warranty.
DPT724
-
Single Channel Annual Event Timer
•
12-24VAC/VDC operation.
 •
10 amp independent relay output.
•
50
individual daily/weekly and 10 holiday events.
•
EE Prom memory protects against loss of programming due to power failure.
•
Built-in 12VDC battery charger.
•
DIN Rail mountable.
•
Lifetime Warranty.
The SunSaver is the most advanced small PV charge controller
available today.
Rated for 6.5, 10 and 20 amps (12V and 24V), the SunSaver is
priced lower than competitive PV regulators. Yet, the SunSaver includes standard
features and capabilities not found in any other small PV controller. These
include:
- Extremely High Reliability
- Full, continuous current ratings at 60° ambient temperatures.
- Advanced lightning and transient overvoltage protection.
- Reverse polarity protection.
- High quality surface-mount components.
- Series switching design for improved safety and protection.
- Outstanding PWM Battery Charge Control
- Confirmed increase in battery capacities and operating life.
- PWM Pulse charging for highest charge acceptance.
- Standard temperature compensation.
- Standard Sealed / Flooded battery select at the terminal.
- Accuracy to millivolt levels.
- Highest Levels of Quality
- Approved for use in Hazardous Locations: Class 1, Div. 2, Groups A-D.
- Built in a world class ISO 9002 certified facility.
- Automated production so every unit is exactly the same.
- Parts soldered to .0006 inch accuracy.
- Anodized case, marine terminals, custom potting material.
Morningstar's SunLight is the world's leading solar lighting
controller. We have combined all the advantages of our SunSaver charge
controller with some unique lighting control features.
- Includes all the advantages of the SunSaver charge
controller. Please refer to the SunSaver product information for more details.
- Unique Lighting Control Features
- Using solar array voltage to determine day and night, the SunLight
provides 10 different lighting control options.
- By measuring the length of the night, the SunLight's ON/OFF/ON options
provide the capability to turn on the light at sunset, turn off the light
after 3 to 6 hours, and then turn on the light again for 1 or 2 hours before
sunrise.
- The length of the night is calculated by taking a moving 4 night
average, and thus automatically adjusts for seasonal changes in the length
of the night.
- The test button helps the installer by blinking the red LED to confirm
correct selection of lighting control option, and also turns on the light
for 5 minutes to verify that the light is operating correctly.
- Timer accuracy is within 2 seconds.
- The SunLight is available in 10A or 20A, and at
12VDC or 24VDC
- For solar arrays greater than 20A, the SunLight may
be used in parallel with the SunSaver controller (lighting control limited to
20A).
This technology provides:
- Proven Reliability
- Precise Lighting Control
- PWM Battery Charging
Special Features:
- Rotary digital switch to select among 10 lighting options
- Special on/off/on functions
- Test button turns lights on for 5 minutes
- Timer accuracy is within 2 seconds
Morningstar's TriStar is the world's leading solar controller for both
professional and consumer applications:
The controller is a three-function controller that provides reliable solar
battery charging, load control or diversion regulation
Uses advanced technology and automated production to provide exciting new
features at a competitive cost
The controller is UL listed and is designed for both solar home systems and
professional applications
Click Here for Data Sheet -->>Controllers
Morning Star Tri-Star
 Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
solar charge controller, charge controller,
battery charge controller, battery controller!
|
