Mounting pole guidelines for UniRacs
 

The installer is solely responsible for use of the information below. These are general guide lines for normal installations. The following variances can affect your installation:
 

• The required diameter and depth of the hole are dependent on soil type, which varies by locale. An in stal la tion in
loose, sandy soil will require larger, deeper holes and, there fore, more concrete than an installation in soil of average
density.
• The depth and width of the hole should also be increased in areas subject to winds in excess of 120 miles per hour,
particularly if the location of the mounting pole is open and unprotected. Design wind speed in the table below assumes
29 psf wind force at 90 mph and 51 psf wind force at 120 mph, which correspond to Exposure Category C,
terrain that is fl at and generally open extending one-half mile or more from the site in any quadrant. More severe
exposure—within a quarter mile of open water, for example—will require greater in-ground pole depth and concrete
volume.
• Poles taller than 6 feet above ground require that the depth of the hole be increased. Signifcantly taller poles may
require a larger pole diameter than called for in these installation instructions.
If in doubt, consult a professional civil engineer who is familiar with local soil conditions and wind load requirements.

1. Dig the hole at least four inches deeper than required

2. Stand the pipe in the hole. Brace the pole so that it is plumb. Pour concrete around the pipe, filling the hole to ground level. Add an inch or two of extra concrete above the hole. Use a trowel to form the concrete so that it slopes up to the pole (illustration).
 

3. Allow the concrete to set up for at least 24 hours before installing your UniRac.

Caution
Stainless steel hardware can seize up, a process called galling. To significantly reduce the like li hood of galling, apply a small drop of anti-seize lubricant to the threads of all bolts before installation. Anti-seize lubricants are readily available in auto parts and hardware stores. In their absence, any lubricant will reduce chances of galling.

Contact Us Today!

IQ Solar LED Street Lighting
Self Contained
Easy Automatic dusk-to-dawn operation.
Eco Friendly
No electricity required!
***Withstand 160 MPH winds special order


Your next scheduled maintenance will be in 5 to 7 years!

Complete turn key Systems Solutions for Solar LED Lighting

-Made in USA OkSolar.com products proudly meet the Buy American Act.

-Illumination Engineering Society (IES) OkSolar.com lighting products follow guidelines set out by the IES, the recognized technical authority on illumination.

-International Dark-Sky Association (IDA) OkSolar.com product lines offer dark-sky friendly fixtures, helping to preserve and protect the nighttime environment through responsible outdoor lighting.

U.S. Green Building Council (USGBC) OkSolar.com is a proud member of the USGBC, an organization dedicated to sustainable building design and construction as well as the developers of the LEED building rating system.

All components needed for installation are included (except for the mounting pole optional). The systems are designed for installation onto a wood, concrete, or metal mounting pole. You may choose to use your own pole or we can quote the poles separately from the lighting system itself.

These units can be used for: Area lighting, School security, Billboards lighting, Dock lights, Park lighting, Parking lot lighting, Parkway lighting, walkway lighting, Street lighting, Transit Lighting, Outdoor area lighting, Security Lighting

-Complete turn key Systems Solutions for Solar LED Lighting
-Hurricane Proof LED Solar Lighting - Seismic Restraint Solar LED