|
|
Wireless Sensors, Sensor IR Counter, Wireless Receivers, Wireless Transmitters,
Wireless Antennas
High value wireless solutions for the automation and communications industry
Sensor IR Counter
Battery Operated IR Sensors with an Integrated RF Transmitter
Main Features
IR beam-interrupt 24-bit counter
Battery operated for a truly wireless installation
Radio interface operates with all Point Six Receivers
Unique serial number embedded in radio data packets
Integrated 6-digit LCD beam interrupt counter
Integrated mounting flange
Optional flush-mount wall box kit
Up to 100 Ft. IR transmission range - 60 ft. in low power mode
Up to 600 Ft. radio range
Counts beam interruptions and total beam interrupt duration
CRC-16 error checked radio data packets
1.3” X 2.1” X .6” ABS enclosures
Energy managed low power modes for long battery life
Complies with part 15 of the FCC rules
Patent pending
User replaceable batteries
Front or Side Firing IR Beam
Description:
The Point Six IR Point Sensor is a battery operated infrared beam
interruption sensor with a 418 MHz radio transmitter. The sensor
consists of two parts; the IR transmitter and the IR receiver. The
IR receiver has an integrated 6-digit LCD counter and a radio
transmitter for truly wireless installation and operation. The IR
transmitter produces 16 pulses of IR each second across a distance
of up to 60 feet in low power mode and 100 feet in high power mode.
The user can select the power mode by pushb utton
on the IR transmitter. The IR transmitter flashes 16 pulses of high
intensity IR each second. The nature of these IR pulses is such that
the IR receiver can distinguish them from any other source of IR.
This characteristic allows the IR sensor to operate in almost any
environment without interference from ambient lighting.
The IR Point Sensor is designed to require very little energy; the
internal 3.6 Volt Lithium battery will operate the IR receiver for
up to 6.5 years in unbroken beam mode and 3 years in normal
operation.
The IR transmitter can operate on a single 3.6 Volt internal Lithium
battery for 1 year in low power mode and 4 months in high power
mode. High power mode is rarely used because the IR counter has a
separation range of 60 feet in low power mode and traffic pathways
are rarely larger.
The IR receiver and IR transmitter can be placed in a Shipping Mode
to lower energy usage and to prevent Radio transmissions during
shipping. Holding the pushbutton down for a period of time greater
than 10 seconds and then releasing will enter Shipping Mode. IR
receiver Shipping mode is indicated by the LCD display counting
automatically 1 count each second. When shipped from the
manufacturer the IR counter will always be in Shipping Mode. A rapid
flashing of the LED indicates IR transmitter shipping mode when the
pushbutton is pressed for less than 4 seconds.
Shipping mode is terminated by entry into Online Mode. Online mode
is entered from Shipping Mode by pushing and holding the pushbutton
for greater than 4 seconds and less than 8 seconds or for the IR
receiver until the LCD display clears to zero. While in Online Mode
the IR Point Sensor can be placed in Shipping Mode by pushing and
holding the pushbutton for greater than 8 seconds, upon release the
IR Point Sensor will enter Shipping Mode and will begin counting on
the LCD display once each second. Note that both the receiver and
the transmitter are shipped in Shipping Mode and must be placed in
Online Mode for normal operation. The IR transmitter indicates
shipping mode by a rapid flashing of the LED whenever the pushbutton
is pressed for periods of less than 4 seconds.
While in Online Mode the user can place the receiver in Setup Mode
by pushing the pushbutton for a short time of 1- 4 seconds. The
receiver will be placed in Setup Mode to aid in alignment of the
transmitter and receiver.
For a period of 2 minutes the LED on the receiver will glow to
indicate the reception of the IR beam from the transmitter. After
two minutes or 8-seconds of uninterrupted beam the receiver will
exit Setup Mode and return to Online Mode. In Online Mode the LED on
the front of the receiver will flash briefly each time the IR beam
is interrupted. The LCD counter will count each beam interruption
and the internal 24-bit counters will count the beam- interruption
and the beam-interruption-time.
The LCD counter and the internal 24-bit counters will perform a
Counter Reset each time the push button on the IR receiver is pushed
and held for more than 4 seconds. Counter reset is best performed
after the receiver and transmitter have been setup for Online Mode
operation using Setup Mode.
High Power Mode is entered by pressing and holding the
pushbutton, after 4 seconds the LED will come on steady for 2
seconds. Release the pushbutton during the 2 seconds while the LED
is on to enter High Power Mode. The LED will remain on for 5 seconds
after pushbutton release to indicate High Power Mode.
High power mode increases the IR range to 100 ft. and reduces the
battery life.
Low Power Mode is set by pressing and holding the pushbutton,
after 4 seconds the LED will come on steady for 2 seconds. Release
the pushbutton after the 2 seconds while the LED is off to enter Low
Power Mode. The LED stays off immediately after pushbutton release
to indicate Low Power Mode. Low power mode reduces the IR range to
60 ft. and increases battery life. |
Technical Features:
|
PARAMETER |
MIN |
TYP |
MAX |
UNITS |
|
Battery life IR receiver |
1 |
3 |
6.5 |
Years |
|
Battery life IR transmitter |
.33 (high power) |
- |
1 (low power) |
Years |
|
Battery type; Tadiran TL-2100 |
- |
- |
- |
- |
|
IR range (low power mode) |
.5 |
- |
60 |
feet |
|
IR range (high power mode) |
10 |
- |
100 |
feet |
|
Radio range |
- |
600 |
- |
feet |
|
IR receiver pushbutton down to reset time |
4 |
- |
8 |
seconds |
|
IR receiver pushbutton down to ship mode |
8 |
- |
- |
seconds |
|
IR transmitter pushbutton down to wake
time |
4 |
- |
8 |
seconds |
|
IR transmitter pushbutton down to ship
mode |
8 |
- |
- |
seconds |
|
Enclosure 1.3”X2.1”X.6” ABS Plastic |
- |
- |
- |
- |
|
|
|
Wireless Receivers: A complete family of wireless RF sensors, transmitters,
loggers, repeaters, receivers and servers spanning the 418MHz. to 2.4GHz
frequency range. With an emphasis on modularity and compatibility, The Point
Family is ideally suited for a broad range of applications from basic telemetry
to custom engineered wireless networking solutions.
Wireless Sensors: Adott offers an expanded line of wireless sensors to
measure temperature, relative humidity, pressure, vibration, analog voltage and
current, and discrete digital inputs. Each sensor is battery operated and fitted
with a microprocessor controlled 418 MHz radio transmitter.
GeneralCommunications Wireless Solutions Provider putting the latest RF and
IR technology to work to enhance productivity and increase profits. More than a
radio company, GeneralCommunications Point Wireless combines wireless (RF & IR)
data transmission with extensive array of sensors and application specific
modules suited for a variety of common applications. GeneralCommunications works
closely with OEMs in dozens of industries to capitalize on the benefits of
wireless technology. All products are general purpose in design and appeal to a
broad customer base. Typical deployments include traffic light automation, food
safety, energy management, access control, fire safety and trucking. The
GeneralCommunications value proposition is based on the ability to engineer
application specific solutions ranging from basic telemetry to wireless
networking. This value arises from GeneralCommunications application awareness
and the command of innovative, high value designs. In addition to application
specific solutions, Point Six Wireless also offers a complete line of general
purpose products for the transmission of Ethernet, serial, Modbus, Weigand,
analog, discrete or sensor based data.
|
Automation Wireless Solution Provider
|
|
IQ Sensors
418 -
IQ Sensors 900 -
Wireless I/O -
Software
Industrial Ethernet
Products
|
|
Automation -
Industrial Ethernet
Products - SCADA
|
|
Power Supplies -
Solar Power SCADA |
 |
BBS Battery backup system (BBs) that provide battery power
to traffic intersections.
|
 iPhone
Remote Control for Video IP Any Where! |
IQ Traffic control and access control
products
Traffic Signal Monitors .
signal monitors, vehicle detectors, power
supplies, load switches, flashers, bus interface
units, and detector harnesses) that offer value
added benefits for traffic signal cabinets as
well as gate, parking, and/or door operators
|
UPS
backup your traffic systems with IQFuelCell
 IQEnergy:
IQ Fuel cells are now available as an
alternative source for renewable energy.
Unlike traditional power generators,
they don't require gasoline to generate
power. They also provide an alternative
to solar generators because they do not
depend on any external power gathering
equipment. These units are compact,
durable, and built to power a wide range
of applications.
The Best Generator Ever!
Applications: Airports, Computer Rooms,
Hospitals, Traffic, UPS |
|
Signal Conditioning
(ADAM-3000)
The ADAM-3000 series modules are the most
cost-efficient, field configurable isolation-based signal conditioners
on the market today. These modules are easily installed to protect
your instruments and process signals from the harmful effects of
ground loop, motor noise, and other electrical interference. |
 |
Remote I/O Module
(ADAM-4000)
In order to provide the best Remote DA&C system
solution to fully fit the request from industrial users, ADAM-4000
series has been improved with two design concepts: Industrial standard
and Intelligent functions. |
 |
Distributed I/O System
(ADAM-5000)
ADAM-5000 Ethernet I/O system and isolated I/O
modules now available are bringing new communication performance and
system reliability to the ADAM product line, and to the Industrial
Automation industry in general. |
 |
Smart Web I/O Modules
(ADAM-6000)
ADAM-6000 Smart Web I/O Module is an
industrial-grade Ethernet hub/switch for Ethernet networking solutions
in Industrial Automation environments. It allows users to expand their
industrial networks fast and cost-effectively. |
|
SCADA -
Wireless SCADA systems:
Industrial Automation, Process Automation, Factory Automation,
Machine Control, Motion Control, Process Control & Instrumentation
RF Wireless Solutions, RF, Wireless Data Collection, Industrial RF
solutions, SCADA, wireless SCADA, RF SCADA monitoring, wireless
transceivers
Data from and control signals to pipes, valves and pumps can be sent
wirelessly via our products.
Electric utilities worldwide can use wireless solutions for
monitoring and controlling vital processes in the development and
distribution of electricity including data from substations,
capacitor banks and high tension lines.
Use wireless to link various segments of their infrastructure, and
to monitor and control alarms and sensors.
Contact US Today! |
|
The ADOTT global
leader, providing a full range of industrial DA&C products. With
rich terminal modules and software support, Adott provides
high-speed, high quality yet cost saving products for industrial
requirements. ADOTT plug-in I/O solutions meet all your
requirements in most general purpose Machine Automation
applications. Both positioning control and velocity control are
supported.
|
|
|
 |
PCI-Bus
Half-size PCI-Bus DA&C cards follow the
industrial standard form factor of half-length ISA and PCI add-on
cards. |
 |
ISA-Bus
Data acquisition and control hardware generally
performs one or more of the following functions: analog input,
analog output, digital input, digital output and counter/timer
functions. |
 |
PC/104
Embedded applications offen require specific
features, creating a custom made board with desired features and
characteristics is expensive and time consuming. A simpler and
more cost-effective solution is to add features by incorporating
PC/104 modules. |
 |
Motion
ADOTT Stepping/Pulse-type Servo Motor Control
Card is designed for general-purpose extreme motion applications.
For advanced applications, we supply Windows DLL drivers and
user-friendly examples to decrease your programming load. |
 |
MIC-2000
The MIC-2000 series is a family of rugged and
flexible PC compatible industrial computers. Based on open ISA-bus
passive backplane technology, its flexible modular system design
makes upgrades and maintenance simple. With superior mechanical
reliability and bus extension capabilities, the MIC systems are
ideal for use in applications where a harsh or vibrationprone
environment would prohibit the use of a standard office PC or
compatible. |
ADAM-5511
System Specifications PC-based Programmable Standalone
Con troller
Main Features
Network Nodes:
32 nodes (ADAM-4000)
Network Nodes:
64
Communication
Protocol: Modbus/RTU
Communication
Network: RS-485
Communication
Port: RS-485 x 1, RS-232 x 1
Programming
Language: C language
I/O Points: 64
(4 I/O slots)
Communication
Speed: up to 115.2 kbps
Introduction
The ADAM-5511 is a PC-based programmable
micro-controller for standalone data acquisition and control system. It¡¦s
IBM-PC compatible hardware and operating system runs programs written in
both assembly and high-level languages. Each system can handle up to four
I/O modules (up to sixty-four I/O points). The system also provides serial
communication ports (RS-232/485), allowing the system to communicate with
other Modbus devices for versatile applications. |
|
 |
Battery Charger: 12Volts,
24 Volts, 36Volts, 48 Volts -120VAC or 230VAC
Using state-of-the-art, switch-mode technology, the DLS Power Supply series
is engineered with the user and variable environmental conditions in mind.
Extra care has been given to insure many years of service-free operation,
even when subjected to extremely harsh conditions. Batteries are charged
quickly and efficiently without over charging and pumps, motors, and fans
operate perfectly for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC
ripple to cause static or premature failure of radio or television
equipment.
|
|
Inverter/Charger Available in 12 - 24- and 48-volt models, it provides
utility-grade output power and offers high surge capacity
105 VAC/60 Hz - 105 VAC/50 Hz - 120 VAC/60 Hz - 220 VAC/60 Hz - 230 VAC/50 Hz-DC
to DC Converters
-DC to DC Converters Din Rail
-Din Rail Linear Power Supplies
-DIN Rail power supplies
-Din Rail Single Phase Power Supplies
-Din Rail Unregulated Line Power Supplies
-Din Rail Voltage Regulator
-Inverters Accessories
-Inverters DC/AC
-Mini Power
-Power Supplies
-Power Transformers
-Transformer |
|
|
|
Wireless Solution Provider
|
Sensor with integrated
Transmitters
Adott offers an expanded line of wireless sensors to measure
temperature, relative humidity, pressure, vibration, analog
voltage and current, and discrete digital inputs.
Each sensor is battery operated and fitted with a
microprocessor controlled 418 MHz radio transmitter. |
| Item# |
Description |
48400 |
Sensor
Temperature
Wireless Temperature and Unique ID Transmitter.
Main Features:
Digital temperature measurement
64-Bit Unique ID
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating for wet environments
Internal Loop antenna
Low Cost.
|
|
|
Sensor Counter/Temperature
418 MHz Digital Counter and Temperature Sensor
The Point Sensor Counter/Temperature wireless transmitter is
a battery operated digital counter and temperature sensor
with a microprocessor controlled 418 MHz.
Main Features
32-Bit unique ID with 24-bit Digital Counter, 13-bit
Temperature, digital input status
Switch for installation and service mode indication
Broad operating temperature range
Up to 600-foot range
Transmission rates from 10 to 240 seconds
Up to 100 transmitters can coexist
Battery lasts from 5 to 10 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
CRC-16 checked Status, ID, temperature and counter data
Internal Loop antenna |
|
48415 |
Sensor Analog 5V
418 MHz transmitters with analog input and Unique ID
Main Features:
Analog input
12-bit Analog to Digital Conversion
Transmits Unique ID and analog value
Up to 600-foot transmission range
Transmission intervals from 10 to 240 seconds
Patent Pending Modulator
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
Internal Loop antenna
Low Cost |
48416 |
Sensor Analog 10V
418 MHz transmitters with 12-bit analog input/ Unique ID
Main Features:
Analog input
12-bit Analog to Digital Conversion
Transmits Unique ID and analog value
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Patent Pending Modulator
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
Internal Loop antenna
Low Cost |
48417
|
Sensor Analog 20mA
418 MHz transmitters with analog input / Unique ID
Main Features:
Analog input
12-bit Analog to Digital Conversion
Transmits Unique ID and analog value
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Patent Pending Modulator
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
Internal Loop antenna
Low Cost |
48413
|
Sensor Temperature
/ Humidity
Wireless Temperature and Relative Humidity Transmitter
Main Features:
Measures Temperature and Relative Humidity
Up to 600-foot transmission range
Transmission rates from 10 to 240 seconds
Patent Pending Modulator
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Broad operating temperature range
Complies with part 15 of the FCC rules
Water resistant coating on PCB
Internal Loop antenna
Low Cost |
48409
 |
Sensor Magnetic
Door Open/close
418 MHz Transmitter
Main Features
32-Bit unique ID with 24-bit Digital Counter, digital input
status
Switch for installation and service mode indication
Up to 600-foot range
Transmits immediately on status change
Up to 100 transmitters can coexist
Battery lasts from 5 to 10 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
CRC-16 checked Status, ID and counter data
Internal Loop antenna
Low Cost |
|
|
Light |
|
48403 |
Sensor Motion
418 MHz Transmitter
Main Features
Digital motion measurement via internal weighted
accelerometer
64-Bit unique ID
Up to 600 foot transmission range
30 second transmission interval
Patent pending
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS enclosure
Complies with part 15 of the FCC rules
Water resistant coating for wet environments
Internal loop antenna
Low cost |
48418
|
Sensor Pressure
418 MHz Pressure Transmitter
Main Features
Digital pressure measurement
64-Bit Unique ID
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Patent Pending Modulator
Battery life up to 10 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating for wet environments
Internal Loop antenna
Low Cost |
48404 |
Sensor Power
Monitor
418 MHz Transmitter
Main Features
Measures current draw
64-Bit unique ID
12-bit analog to digital conversion
Transmits unique ID and analog value
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Patent pending modulator
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS enclosure
Water resistant coating on PCB
Internal loop antenna
Low cost |
| Discrete
input |
|
48401
|
Sensor Pulse
Counter
418 MHz Transmitter
Main Features
30-Bit unique ID with 24-bit Digital Counter and radio
transmitter
Counts up to 60,000 pulses per minute
Switch for installation and service mode indication
Broad operating temperature range
Up to 600-foot range
Transmission rates from 10 to 240 seconds
Up to 100 transmitters can coexist
Battery lasts from 6 to 10 years
Very small (1.3” X 2.1” X .6”) ABS Enclosure
Complies with part 15 of the FCC rules
Water resistant coating on PCB
CRC-16 checked Status, ID, and counter data
Internal Loop antenna
Low Cost |
48410
 |
Sensor RF
Identification
418 MHz. FCC Certified Radio Transmitter
Main Features
64-Bit unique ID
Up to 600 foot transmission range
Transmission intervals from 10 to 240 seconds
Patent pending
Battery life up to 5 years
Very small (1.4” X 2.1” X .6”) ABS enclosure
Complies with part 15 of the FCC rules
Water resistant coating for wet environments
Internal loop antenna
Low cost |
48405
|
Sensor Vibration
418 MHz Transmitter
Main Features
Digital broad range vibration measurement via internal
accelerometer
64-Bit unique ID
Up to 600 foot transmission range
30 second transmission interval
Patent pending
Battery life up to 5 years
Very small (1.3” X 2.1” X .6”) ABS enclosure
Complies with part 15 of the FCC rules
Water resistant coating for wet environments
Internal loop antenna
Low cost |
|
|
Fire Extinguisher |
|
48402 |
Sensor Thermistor
418 MHz Transmitter
The Point Sensor Thermistor wireless transmitter is a
battery operated 10K thermistor interface with a
microprocessor controlled 418 MHz. |
| IR Traffic
Counters |
48407 |
Counter
IR Beam Traffic Counter
Battery powered - up to 2 year operation
Local display
Integrated 418MHz/433MHz transmitter
High Impact ABS Enclosure (1.3" x 2.1" x .6") |
48408 |
Counter Plus
IR Beam Traffic Counter
Battery powered - up to 2 year operation
Local display
Integrated 418MHz/433MHz transmitter
High Impact ABS Enclosure (1.3" x 2.1" x .6") |
48412 |
Counter LV
IR Beam Traffic Counter - reflective
Low voltage powered
Local display
Integrated 418MHz/433MHz transmitter
High Impact ABS Sensor Enclosure (1.3" x 2.1" x .6") |
48414 |
Counter MOD
IR Beam Traffic Counter - reflective
Low voltage powered
Local Display
Optional Dual Beam
Optional plug-in transmitter (418/433/900MHz/2.4Ghz)
Accommodates external sensors
High Impact ABS Sensor Enclosure (3.3" x 3.3" x 1.25")
|
48419 |
Proximity Counter
IR Beam Proximity Counter
No reflector required
Range up to 7 feet/2.3 meters
Battery powered - up to 2 year operation
Integrated 418MHz/433MHz transmitter
High Impact ABS Enclosure (1.3" x 2.1" x .6") |
|
Repeat and Log Data |
| GC Repeater
 |
Repeater
418 MHz RF Receiver with 900 MHz or 2.4 GHz RF Transceiver
Main Features
418 MHz Receiver range up to 600 feet.
Built in 900 MHz. or 2.4 GHz. frequency hopping radio for
long-range wireless interface.
Transceiver Range Indoor: 600’ to 1300’ (900 MHz); 300’ to
750’ (2.4 GHz).
Transceiver Range Outdoor (with dipole): 7mi. (900 MHz);
3mi. (2.4 GHz).
Transceiver Range Outdoor (with high gain antenna): >20mi.
(900 MHz); >12mi. (2.4 GHz).
Supports all Point Sensors and LSX transmitters
Low power, 6-24 VDC at 200 milliamp transmitting, 70
milliamp receiving. |
| GC Integrator Logger
48420
 |
GC Integrator Logger
Integrator Logger
418 MHz. Radio Receiver/Logger and 1-Wire Interface
Main Features
Radio decoder for Point Six wireless sensors
ASCII command support for all 1-Wire™ devices
Decodes CRC-16 error encoded radio packets
Integrated data logger for up to 20 sensors
Programmable serial number filters for 20 sensors
Battery backed Real Time Clock
Provides Search, Family Search and Conditional Search
Block mode commands support all 1-Wire™ device functions
Supports Touch Memory File Structure for Dallas
Semiconductor iButtons™
Automatic CRC16 for TMEX™ files
Automatically provides smart strong-pull-up for 1-wire
sensors
ESD and over-current Protection on the 1-Wire™ bus
ESD and over-current Protection on the RS485 bus
RS485 Serial Command Interface, (field selectable)
RS232 Serial Command Interface, (field selectable)
Optional 900 MHz. or 2.4 GHz. Radio Network Interface,
(field installation)
Optional 418 MHz. radio receiver for Point Sensors, (field
installation)
Optional Opto-isolated RS485 Serial Command Interface,
(field installation)
Optional Ethernet (TCP/IP) Network Interface, (field
installation)
Readable model#, version# and unique 32-bit serial number
Internal antennas for 418 MHz. and 900 MHz. or 2.4 GHz.
radios
Dimensions 130 x 130 x 75 MM
Enclosure range-of material: - 40 °C - + 120 °C
Enclosure Temp. range in cont. use: 80 °C |
| |
Access Control |
 |
Portable Card Reader
Wireless Portable Proximity/IR Card Reader
The Portable Card Reader (PCR) from Point Six Wireless is
designed to provide the user with a lightweight, compact and
aesthetically pleasing method of reading proximity cards.
|
 |
Wireless Stationary Card Reader
Wireless Stationary Proximity/IR Card Reader
The Stationary Card Reader (SCR) is designed to be used
either mounted to a wall or directly to a door and can be
operated from external power or internal batteries.
|
 |
Access Panel Connectivity Products
Access Panel Connectivity
The Control Panel Transceiver (CPT) is a compact data
transceiver perfect for those needing high performance and
dependable operation. The Door Interface Module (DIM) plugs
directly into the Access Control Panel and produces a
Wiegand output identical to that of a wired system.
|
|
Receivers and Web
Servers |
| GCS Server
 |
Input:
Output:
- RS232
- 900MHz
- Ethernet
- Modem/Cel
OPC, DDE drivers
Archive Data
Control
Alarm/Event Utilities |
Server
Rf Receiver with an Integrated Data Server
Main Features
900 MHz or 2.4 GHz Receiver
Supports Point Sensors, LSX transmitters via Point
Repeater
Communicates: Ethernet (TCP/IP), Modem, serial port
Data Logger – logs periodic snapshots of the current
readings & logs events
Web Server – Dynamic HTML web page server showing
current readings and alarms
Event based alarms – callout or email
Push connection to other hosts using TCP/IP based on
alarms
Simple ASCII command/response protocol
100 Sensors (total of 100 I/O points) maximum
8600 Historical Records capacity
1800 Event Logging capacity
Two level password security
Each I/O configurable to trigger events
Periodic callouts with interval times of 1 minute to 7
days
|
| GCT
Transmitter
504452 |
Output:
OPC, DDE, Drives |
Transceivers
General Purpose 900 MHz./2.4GHz. Spread Spectrum
Frequency Hopping Transceivers
Main Features
LED power and configuration activity indicator
Astron AXH900RP SMA R Reverse Polarity SMA 6.5” Antenna
High Impact ABS enclosure
Channel Capacity hops through 25 channels, Up to 65,000
NetIDs
Serial Data Interface Asynchronous (RS-232) CMOS (TTL)
signals, 5V, 3.3V tolerant
I/O Data Rate - 9600 or 19200 bps
Transport Protocol - Transparent networking
Network Topology - Multi-drop
Channel Data Rate - 10k or 20k bps respectively (vary
with data rate)
Transmit Power Output - 100mW
Rx Sensitivity: -110 or -107 respectively
Range - Indoor: 600’ to 1300’ Outdoor: 7mi. with dipole,
>20mi. with high gain antenna
Interference Rejection - 70 dB at pager and cellular
phone frequencies |
|
504454 |
|
GCTZR-MA
900-MHz frequency-hopping RS485 Master/Slave
auto-sensing radio interface
The TZR-MA uses an embedded 100-milliwatt frequency
hopping wireless modem that provides communication
between a local RS485 network and a remote network of
RS485 connected devices. |
| GCV View |
Output:
OPC, DDE, Drives |
View
RF Receiver
Main Features
High performance 418 MHz receiver
Compatible with OneSix DDE Server and OPCServer
PointView PC Software included
Serial connection directly to a PC
Powered by RS232 port or external source
ASCII radio packet data output
Decodes CRC-16 error encoded radio packets
DB-9 connector for RS232 interface
Up to 480 ft. range |
| GCH Host
 |
Output:
OPC, DDE, Drives |
Host
Low Cost RS232 or RS422 ASCII output 418 MHz. Receiver
Main Features:
High performance 418 MHz receiver
Serial connection directly to a PC
Powered by RS232 port or external source.
ASCII radio packet data output.
Decodes CRC-16 error encoded radio packets.
DB-9 connector for RS232/RS422 interface.
600 ft. maximum range |
| |
Receivers |
 |
View Receiver
418MHz/433MHz receiver
RS 232 output
ASCI format data
450 feet range |
 |
Host Receiver
418MHz/433MHz receiver
RS 232 output
ASCI format data
600 feet range |
 |
Mesh Repeater
418MHz/433MHz to 900MHz/2.4GHz repeating
900MHz to 900MHz SS FH mesh network repeating
Serial outputs
Self configuring
2000 feet indoor range per Repeater |
 |
Manager
900MHz/2.4GHz SS FH transceiver
TCP/IP output
Optional browser based traffic reports
OPC/DDE drivers
XML compliant
Data archiving
2000 feet indoor range |
|
|
Server
900MHz/2.4GHz SS FH transceiver
TCP/IP output
Modem output
Optional browser based traffic reports
OPC/DDE drivers
XML compliant
Data archiving
2000 feet indoor range |
|
 Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
Wireless Sensors, Wireless Receivers, Wireless Sensors, Wireless
Receivers, high value wireless solutions for the automation and
communications industry!
|
|
